CyberView DF117 1U Dual Slide LCD Console Drawer User Manual

CyberView DF117 1U Dual Slide LCD Console Drawer

Legal Information

First English printing, November 2020
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
• When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.
• Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
• If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
• Observe all precautions and warnings attached to the equipment.
• If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fi re or electrical shock.
• Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

• Any product, on which the serial number has been defaced, modified or removed.
• Damage, deterioration or malfunction resulting from:
  • Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
  • Repair or attempted repair by anyone not authorized by us.
  • Any damage of the product due to shipment.
  • Removal or installation of the product.
  • Causes external to the product, such as electric power fluctuation or failure.
  • Use of supplies or parts not meeting our specifications.
  • Normal wear and tear.
  • Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Before Installation

• It is very important to mount the equipment in a suitable cabinet or on a stable surface.
• Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution:

• To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.
• When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.
• Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the finish.
• Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.
• Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps:

1. Disconnect the power cord.
2. Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps:

1. Disconnect the power cord.

2. Spray a small amount of non-abrasive cleanser on a microfiber cloth.
   Caution: Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.

3. Gently wipe the surface. Use as little pressure as possible.

4. Wait until your monitor is completely dry before plugging it in and powering it up.

Package Content

• DF117 unit x 1
  • CX-6A 6ft DVI-D console cable x 1 (Alternative : CB-6A 6ft VGA console cable)
  • Power cord x 1
  • M6 screw, cage nut & cup washer x 8

The above package content is only for the single console models. It varies with options such as KVM, SDI, HDMI & DC power.

Structure Diagram

1. Carry handle to release the 2-pt lock
2. LCD interchangeable module kit
3. Installation Slides
4. LCD membrane
5. Membrane switch (KVM option)
6. Audio speaker (for SDI or HDMI option)
7. Keyboard interchangeable module kit
8. Touchpad mouse module
9. 1U dual slide for LCD console drawer

Dimension

Front View

Rear View

Side View

Top View

Model| Product Dimension
(W x D x H)| Packing Dimension
(W x D x H)| Net Weight| Gross Weight
---|---|---|---|---
DF117| 441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73 inch| 595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch| 11.9 kg
26.2 lb| 17.9 kg
39.4 lb

The weight is only for the single console models. It varies with accessories & options such as KVM, SDI, HDMI & DC power.

Installation – How to Install

• Step 1:

  • Insert the left and right rear mounting brackets into the LCD console drawer.
    

• Step 2:

  • Measure the depth of the front and rear mounting rails.
  • Align each rear mounting bracket to a suitable length.
    

• Step 3: Complete the installation

  • Fix the LCD console drawer into the rack.
    M6 screw, cage nut & cup washer x 8 are provided.
    

Installation – How to Use the Dual Slides

• Press the handle button and gently slide out the drawer.
  

• Flip up the LCD to a suitable angle.
  

• Operate the LCD console drawer.
  

• Flip down the front panel.
  

• Press the handle button and gently push back the drawer into the rack.
  

• Return the LCD console drawer to park position.

Connection to USB Server via CX-6A Cable

Connection to External KVM via CX-6A Cable

Caution: The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot- pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way.

Connection to USB Server via CB-6A Cable

Connection to External KVM via CB-6A Cable

Caution: The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot- pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way.

Product Specifications

Auto-sensing 100 to 240VAC,
50 / 60Hz

Power Consumption for Single Console| Screen ON| Max. 14W
Power saving mode| Max. 2W
Power button OFF| Max. 1W
Power Consumption with KVM integration| Screen ON| Max. 45W
Power saving mode| Max. 34W
Regulatory| Safety| FCC & CE certified
Environmental| RoHS3 & REACH compliant
Environmental Conditions| Operating| Temperature| 0 to 55°C degree
Humidity| 20~90%, non-condensing
Altitude| 16,000 ft

Storage / Non-operating

| TemperC| C degree
Humidity| 5~90%, non-condensing
Altitude| 40,000 ft
Shock| 10G acceleration (11ms duration)
Vibration| 10~300Hz 0.5G RMS random
Physical Specification| Product (W x D x H)| 441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73 inch
Packing (W x D x H)|

595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch

Net Weight| 11.9 kg / 26.2 lb
Gross Weight| 17.9 kg / 39.4 lb
Applicable Format| DVI-D / VGA Input| PC Signal| 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
640 x 480 x 60Hz
Audio Signal| 2ch Linear PCM
HDMI Input| PC Signal| Same as VGA
HDMI 1.4| 1920 x 1080 x 50 / 60Hz (1080p)
1920 x 1080 x 25 / 30Hz (1080i)
1280 x 720 x 50 / 60Hz (720p)
720 x 480 x 50 / 60Hz (576p / 480p)
Audio Signal| 2ch Linear PCM
Display port Input| PC Signal| 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
640 x 480 x 60Hz
Audio Signal| 2ch Linear PCM

• In some circumstances, if the user connects the LCD to PC via HDMI port or video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fi x the issue.

Keyboard / Mouse Specifications

• G keyboard integrated with touchpad
  Key force| 55 ± 5g
  ---|---
  Travelling distance| 3 ± 0.3mm
  Switch life| > 10 million life cycle time
  OS support| Windows / Linux / Unix / Mac OS

Supporting Layouts

• America
  • United States
• EMEA
  • United Kingdom
  • Germany
  • France
  • Spain
  • Italy
• Asia
  • Japan
  • Korea

MAC Keyboard / Mouse Options

• MAC keyboard integrated with touchpad
  

Supporting Layouts

• America
  • United States

How to Use “MAC” Keyboard

Keyboard Features

• F1
  Decrease display brightness

• F2
  Increase display brightness

• F3
  Mission control

• Only works with OS X Lion default Keyboard Shortcuts.

  • F4
    Dashboard

  • F7
    Rewind

  • F8
    Play / Pause

  • F9
    Fast-forward

  • F10
    Mute sound

  • F11
    Decrease volume

  • F12
    Increase volume

  • Eject disc

  • Command

SUN Keyboard / Mouse Options

• S keyboard integrated with touchpad
  

S keyboard integrated with touchpad / trackball

• Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
• 104 key notepad keyboard with full numerical pad and SUN function
• USB interface
• US layout only

How to Use “S” Keyboard

Num LED in Off mode
Key pad behaves as a SUN Solar system administration command mode

Num LED in Green mode
Key pad behaves as a normal key pad mode

Audio / Display Keys

• F9
  Audio : Mute Display : Degauss

• F11
  Audio : Decrease volume
  Display : Decrease contrast

• F12
  Audio : Increase volume
  Display : Increase contrast

On-screen Display Operation (OSD)

• Power light
• Green = On
• Orange = Power saving

| Power on / off LCD
| Display the OSD menu
| Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds)
| Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)

1. Picture
   Brightness : Adjust the screen brightness
   Contrast : Adjust the difference between the image background
   (black level) and the foreground (white level)
   Black level : Adjust background black level of the screen
   Eco : Screen in power saving mode
   

2. Position
   H-Position: To adjust the horizontal position of the video
   V-Position: To adjust the vertical position of the video
   Clock: To auto adjust H. Size of the screen
   Phase: To fine tune the screen.
   Picture size: FULL SCREEEN / 4:3 / 5:4 / 16:10
   

3. Color
   Color temperature: User / Warm / Cool / 5400k mode and Red / Green / Blue color balance
   Sharpness: Adjust the image from weak to sharp
   Hue: Adjust the screen hue value
   Saturation: Adjust the saturation of the image color
   Dynamic luminous control: Control the dynamic brightness
   

4. OSD Set
   Language: Select the language in which the OSD menu is displayed – English
   OSD H-Position: Align the screen image left or right
   OSD V-Position: Align the screen image up or down
   OSD time out: Adjust the screen timeout
   OSD transparency: Adjust the screen transparency
   OSD rotation: Rotate the screen – 90° / 180° / 270°
   

5. Reset
   Reset: Return the adjustment back to factory setting
   

6. MISC
   Signal source: Select the signal source – DP / HDMI1 / HDMI2
   Mute: Turn off the surrounding sound
   Audio in: Auto / Line in / DP
   Volume: Adjust the volume of sound
   Sleep mode: Set the off time – 10 min / 20 min / 30 min / 50 min / 60 min / 120 min / 240 min
   

Options : 3G / HD / SD-SDI Input

Austin Hughes’ SDI input is an ideal solution for the broadcast-grade video and high resolution CCTV market.
Designed for use with CyberView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.

ITU-R BT.656
Audio| SMPTE 299M / 272M-C
Compatible Video Format| 3G-SDI| 1080p| @60 / 50Hz, 4:2:2
| 1080p| @30 / 25 / 24Hz, 4:4:4
| 1080i| @60 / 50Hz, 4:4:4
| 720p| @60 / 50Hz, 4:4:4
HD-SDI| 1080p| @30 / 25 / 24Hz, 4:2:2
| 1080i| @60 / 50Hz, 4:2:2
| 720p| @60 / 50Hz, 4:2:2
SD-SDI| 480i| @60Hz, 4:2:2
ITU-R BT.656| 576i| @50Hz, 4:2:2
Compatible Audio Format| 3G-SDI| 48kHz, 16 / 20 / 24-bit, 2 CH, Synchronized Video
HD-SDI| 48kHz, 16 / 20 / 24-bit, 2 CH, Synchronized Video
SD-SDI| 48kHz, 16 / 20 / 24-bit, 2 CH, Synchronized / Asynchronized Video
Max. Transmission Distance 75-ohm coaxial cable| 3G-SDI| 150m at 2.97Gb/s
HD-SDI| 250m at 1.485Gb/s
SD-SDI| 480m at 270Mb/s

Options

DP Option

• Display Port (DP 1.0, HDCP 1.3)

HDMI Option

• HDMI (HDMI 1.4, HDCP 1.4)

BNC Option

• Composite (BNC)

AV4.4 Option

• Display Port (DP 1.0, HDCP 1.3)
• HDMI (HDMI 1.4, HDCP 1.4)
• Composite (BNC)

1. In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fi x the issue.

Options: DC Power

Input rating
Input voltage:
Input range:Input current
– No load
– Full load|

12-Volt
9 ~ 18V

50 mA
4950 mA

| 24-Volt
18 ~ 36V50 mA
2450 mA| 48-Volt
36 ~ 75V50 mA
1220 mA|

110-Volt
66 ~ 160V

35 mA
749 mA

Output rating
Output voltage:|
12-Volt|
12-Volt| 12-Volt|
12-Volt
Output current:| 4.16A| 4.16A| 4.16A| 6.25A
Efficiency| 84%| 85%| 85%| 91%

*** For DC power option:

1. If the unit with LCD, earthing may be required
2. DC option excludes AC power adapter and power cord.

KVM Integration

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-2KKVM- KIT.pdf

2K
KVM| Local| Remote| IP| 8-port| –| –
---|---|---|---|---|---|---
0| 0| 0| -801D| –| –

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-DVIKVM- KIT.pdf

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MUKVM- KIT.pdf

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-UKVM- KIT.pdf

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM- KIT.pdf

DB-15
Matrix KVM| Local| Remote| IP| 8-port| 16-port| 32-port
---|---|---|---|---|---|---
1| 1| 1| -MIP813| -MIP1613| –
1| 1| 2| -MIP824| -MIP1624| –
1| 1| 0| -M802| -M1602| –
1| 2| 0| -M803| -M1603| –
1| 3| 0| -M804| -M1604| –

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM- KIT.pdf

DB-15
Combo KVM| Local| Remote| IP| 8-port| 16-port| 32-port
---|---|---|---|---|---|---
1| 0| 1| -IP802| -IP1602| –
1| 1| 0| -802| -1602| –
1| 0| 0| -S801| -S1601| –

Model

| Product Dimension (W x D x H)| Packing Dimension
(W x D x H)| Net Weight| Gross Weight
---|---|---|---|---
DF117 with KVM| 441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73″| 595 x 860 x 140 mm
23.4 x 33.9 x 5.5″| 12.9 kg
28.4 lb|

18.9 kg
41.6 lb

The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2021 Austin Hughes Electronics Ltd. All rights reserved.

www.austin-hughes.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>