CyberView CV-801D 8-Port 2K 60Hz KVM Switch User Manual

CyberView CV-801D 8-Port 2K 60Hz KVM Switch

Designed and manufactured by Austin Hughes

Legal Information

First English printing, November 2020 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
• When installing, place the equipment on a sturdy, level surface to prevent it from  accidentally falling and causing damage to other equipment or injury to persons nearby.
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating
• Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
• If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
• Observe all precautions and warnings attached to the equipment.
• If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fi re or electrical shock.
• Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover

• Any product, on which the serial number has been defaced, modifi ed or removed.
• Damage, deterioration or malfunction resulting from:
  • Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
  • Repair or attempted repair by anyone not authorized by us.
  • Any damage of the product due to shipment.
  • Removal or installation of the product.
  • Causes external to the product, such as electric power fl uctuation or failure.
  • Use of supplies or parts not meeting our specifi cations.
  • Normal wear and tear.
  • Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected

Contents

< Part. 1 > 2K KVM

1.1 Package Contents P .1
1.2 KVM port connection P.2
1.3 Specifi cations P.3

< Part. 2 > 2K KVM Usage

2.1 KVM Button P.4
2.2 KVM Hotkey P.5

Before Installation

• It is very important to mount the equipment in a suitable cabinet or on a stable surface.
• Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Installation for standalone KVM

Screw A: 2 pcs

M3.2 x 4.5 mm

Screw B: 8 pcs

M4 x 10 mm

• Install each bracket using screws provided shown in Figure 1
• Fix the KVM into the rack

< Part 1 > 2K KVM < 1.1 >

Package Contents

• 2K KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1

CV-801D

IP console, remote console, daisy-chain and OSD menu are NOT available for this model.

< 1.2 > KVM port connection]

2K KVM Cable
CH-6D : 6 feet DVI-D KVM cable ( Server end : DVI-D + USB-A ) ( KVM port : HDMI + USB-B )

CH-6H : 6 feet HDMI KVM cable ( Server end : HDMI + USB-A ) ( KVM port : HDMI + USB-B )

Specifications

Number of ports : 8
Connector : HDMI 1.4 + USB-B ( Video + KB / MS )
Resolution : 16 : 9 – max. 2560 x 1440@60Hz
16 : 10 – max. 1920 x 1200@60Hz
4 : 3 – max. 1600 x 1200@60Hz

Local Console
Keyboard / Mouse : 2 x USB-A
Video : 1 x HDMI 1.4
Resolution : 16 : 9 – max. 2560 x 1440@60Hz
16 : 10 – max. 1920 x 1200@60Hz
4 : 3 – max. 1600 x 1200@60Hz

Management
PC Selection : Front button & keyboard hotkey

Compatibility
Hardware : HP / IBM / Dell PC, Server and Blade Server SUN / Mac
OS Support : Windows / Linux / Unix / Mac OS

Power
Input : Auto sensing 100 to 240VAC, 50 / 60 Hz
Consumption : Max. 10W

Product Information
Dimension (W x D x H) : 443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight : 2.5 kg / 5.5 lb

Packing Information
Dimension (W x D x H) : 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight : 5.4 kg / 11.9 lb

< Part 2 > Usage

< 2.1 > KVM Button

Power ON

• Turn off all servers and KVM switches
• Make sure all cables / connectors are properly connected
• Recommend Power ON sequence is monitor, KVM switch fi nally computer

Front Panel – Port LED Indications

8 ports

PC port LEDs
Online : Blue LED on indicating a PC is connecting to the port
Active : Green LED on indicating a selected channel
Channel button Press to select channel from 1 to 8

< 2.2 > KVM Hotkey

Remarks:

• Example of “Scroll Lock + Scroll Lock + Port no.”
  – Port No. : 1 to 8
  – e.g. Port 4 : Scroll Lock + Scroll Lock + 4
  – e.g. Port 8 : Scroll Lock + Scroll Lock + 8

• You must press the hotkey within 3 seconds

• A beep sound will be heard for successful entering2K KVM

Hotkey Label

The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2020 Austin Hughes Electronics Ltd. All rights reserved.

www.austin-hughes.com

Documents / Resources

| CyberView CV-801D 8-Port 2K 60Hz KVM Switch [pdf] User Manual
CV-801D 8-Port 2K 60Hz KVM Switch, CV-801D, 8-Port 2K 60Hz KVM Switch, 2K 60Hz KVM Switch, 60Hz KVM Switch, KVM Switch, Switch
---|---

References

• Austin Hughes | Data Center Solutions, Server Rack Power Management, Rack Access, KVM Switch

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>