CYBERVIEW RP-HW719 7U Rackmount Display Panel User Manual

RP-HW719 7U Rackmount Display Panel

dedicated KVM switch and rackmount screen technology
User Manual 19″ Widescreen High Brightness LCD 1000 cd/m²
RP-HW719
7U Rackmount Display Panel Options : – SDI / MCS – AV / HDMI / Audio – Touchscreen / DC power – MIL-type or lockable connector
751
Designed and manufactured by Austin Hughes

UM-CV-751-RP-HW719-Q221V1

www.austin-hughes.com

Legal Information
First English printing, November 2020 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth. Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it. If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment. If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us. Any damage of the product due to shipment. Removal or installation of the product. Causes external to the product, such as electric power fluctuation or failure. Use of supplies or parts not meeting our specifications. Normal wear and tear. Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-position or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-CV-751-RP-HW719-Q221V1

www.austin-hughes.com

Contents

< Part. 1 > RP-HW719

1.1

Package Content

1.2

Structure Diagram & Dimension

1.3

Installation

P.1 P.1 – 2 P.3

< Part. 2 > Specifications / OSD / Remote Controller

2.1

Product Specifications

2.2

On-screen Display Operation ( OSD )

P.4 – 5 P.6 – 7

< Part. 3 > Options

3.1

3G / HD / SD-SDI Broadcast-grade input

P.8

3.2

MCS Multi-display control solution

P.9

3.3

AV2.2D Upgrade : DVI-D + VGA + BNC + S-Video + Audio

P.10

3.4

AV2.2H Upgrade : HDMI + VGA + BNC + S-Video + Audio

P.10

3.5

AV3.0 Upgrade :

P.11

DVI-D + VGA + HDMI + BNC + S-Video + Audio

3.6

HW19″ Touchscreen : Resistive, Capacitive ( 1-point touch ) P.12

3.7

DC Power : 24V / 48V / 125V

P.13

3.8

MIL-type or lockable connector

P.14

UM-CV-751-RP-HW719-Q221V1

www.austin-hughes.com

Before Installation It is very important to mount the equipment in a suitable cabinet or on a stable surface. Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor Caution :
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps : 1 Disconnect the power cord. 2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps : 1 Disconnect the power cord. 2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning. 3 Gently wipe the surface. Use as little pressure as possible. 4 Wait until your monitor is completely dry before plugging it in and powering it up.

UM-CV-751-RP-HW719-Q221V1

www.austin-hughes.com

< Part 1 > < 1.1 > Package Content

RP-HW719 unit X 1 – 6ft VGA cable X 1 – Power adapter X 1 – Power cord X 1

RP-HW719

< 1.2 > Structure Diagram

Front view
1
1 LCD panel 2 LCD membrane 3 Audio speaker 4 Power adapter basket

2 3
Rear view

Power adapter
4
Power cord

DVI-D

Audio

Power BNC S-Video VGA

HDMI

out – in – in Video PC

Basic I/O

: DVI-D + VGA

AV2.2D upgrade : DVI-D + VGA + BNC + S-Video + audio

AV2.2H upgrade : HDMI + VGA + BNC + S-Video + audio

AV3.0 upgrade : HDMI + DVI-D + VGA + BNC + S-Video + audio

Options

: USB for touchscreen & DC power SDI ( AV3.0 upgrade required )

UM-CV-751-RP-HW719-Q221V1

P.1

www.austin-hughes.com

< 1.2 > Dimension
Front View

Side View

Bottom View

UNIT : mm 1mm = 0.03937 inch

Model RP-HW719

Product Dimension (W x D x H)
480 x 58 x 310 mm 18.9 x 2.3 x 12.2 inch

Packing Dimension (W x D x H)

Net Weight

Gross Weight

529 x 124 x 495 mm 20.8 x 4.9 x 19.5 inch

5.8 kg 12.8 lb

7.9 kg 17.4 lb

UM-CV-751-RP-HW719-Q221V1

P.2

www.austin-hughes.com

< 1.3 > Installation

RP-HW719
Step 1
Mount the display panel with M6 screw set. M6 screw x 4 pcs required ( Left & right side ).
M6 screw sets are not provided.
Step 2
Fix the LCD into the rack.

UM-CV-751-RP-HW719-Q221V1

P.3

www.austin-hughes.com

< Part 2 > < 2.1 > Product Specifications

LCD Panel

Panel Size ( diagonal )
Display pixel ( dots x lines ) Brightness ( typ. ) Contrast Ratio ( typ. ) Color Viewing Angle ( L/R/U/D ) Response Time ( ms ) Dot pitch ( mm ) Display Area ( mm ) Surface treatment Surface hardness Backlight Type MTBF ( hrs )

19-inch Widescreen TFT color LCD 1440 x 900 1000 1000:1 16.7 M 80/80/80/80 5 0.2835
408.24H x 255.15V Haze 25%, Hard-coating
3H LED 30,000

Video Connectivity

Digital Analog
Plug & Play Synchronization

HDMI DVI VGA Composite ( BNC ) S-Video ( 4-pin ) DVI / VGA VGA

HDMI 1.2, CEA-861-D DVI-D, TMDS single link Analog 0.7Vp-p NTSC & PAL NTSC & PAL VESA EDID structure 1.3 Separate, Composite & SOG

Audio Connectivity

Audio Input Audio Output

Speaker

• When the audio output is connected, speaker output is OFF

Power

Power Supply Power Consumption

Connector Impedance / Power level Connector Resistance / Power level Dual Stereo Speaker

3.5mm stereo jack 30k / 750mV 3.5mm stereo jack 30k / 2.8V 2W x 2

Range
Screen ON Power saving mode Power button OFF

Auto-sensing 100 to 240VAC, 50 / 60Hz Max. 34W
Max. 2W
Max. 1W

Regulatory

Safety Environmental

FCC & CE certified RoHS3 & REACH compliant

UM-CV-751-RP-HW719-Q221V1

P.4

www.austin-hughes.com

Environmental Conditions

Operating Storage / Non-operating

Temperature Humidity Altitude Temperature
Humidity
Altitude
Shock
Vibration

RP-HW719
0 to 55°C degree 20~90%, non-condensing 16,000 ft -20 to 60°C degree 5~90%, non-condensing 40,000 ft 10G acceleration (11ms duration) 10~300Hz 0.5G RMS random

Physical Specification

Product ( W x D x H ) Packing ( W x D x H )
Net Weight Gross Weight

480 x 58 x 310 mm 18.9 x 2.3 x 12.2 inch 529 x 124 x 495 mm 20.8 x 4.9 x 19.5 inch
5.8 kg / 12.8 lb 7.9 kg / 17.4 lb

• All dimensions stated are subject to change if options are selected / integrated to base model part codes

Applicable Format

DVI-D / VGA Input HDMI Input

PC Signal
PC Signal Video Signal Audio Signal

1440 x 900 x 60Hz 1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz 1024 x 768 x 60 / 70 / 75Hz 848 x 480 x 60Hz 800 x 600 x 60 / 72 / 75Hz 720 x 400 x 70Hz 640 x 480 x 60 / 72 / 75Hz 640 x 400 x 70Hz 640 x 350 x 70Hz Same as VGA
720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
2ch Linear PCM ( 32 / 44.1 / 48 KHz )

UM-CV-751-RP-HW719-Q221V1

P.5

www.austin-hughes.com

< 2.2 > On-screen Display Operation ( OSD )

Membrane Switch

Function
Turn the monitor on or off
Display the OSD menu Act as an Enter key to select screen setting options
Scroll through menu options and adjust the displayed control
Exit the OSD screen Go back to the previous on-screen sub-menu or main menu

Remark : All LED touch buttons in WHITE light. The LED of Power touch button will flash continuously when there is no signal input.
1 All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ). 2 Light up all membrane buttons, please press any button for 1 – 2 seconds ( except the Power ).

UM-CV-751-RP-HW719-Q221V1

P.6

www.austin-hughes.com

< 2.2 > On-screen Display Operation ( OSD )

RP-HW719

OSD Configuration Page
Image: for the brightness, contrast, color temp, red, green, and blue
Geometry: for the auto adjust, H position, V position, phase and clock
Video: for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio: for volume, bass, treble, balance, AVL and mute
Misc: for the language, OSD position, graphic mode, ratio, reset and timer

UM-CV-751-RP-HW719-Q221V1

P.7

www.austin-hughes.com

< Part 3 > < 3.1 > Options : 3G / HD / SD-SDI input
Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
Designed for use with CyberView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.

DVI-D

Audio

Power BNC S-Video VGA

SDI

HDMI

out – in – in Video PC

out – in

*** For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC and audio inputs.

INPUT

3G-SDI IN 3G-SDI OUT

BNC x 1 / 0.8Vp-p ( 75 ohm ) BNC x 1 / Active through, equalized & relocked

Standard Compliance

Video Audio

SMPTE 425M / 274M / 296M / 125M ITU-R BT.656 SMPTE 299M / 272M-C

Compatible Video Format

3G-SDI
HD-SDI SD-SDI ITU-R BT.656

1080p 1080p 1080i 720p 1080p 1080i 720p 480i
576i

@60 / 50Hz, 4:2:2 @30 / 25 / 24Hz, 4:4:4 @60 / 50Hz, 4:4:4 @60 / 50Hz, 4:4:4 @30 / 25 / 24Hz, 4:2:2 @60 / 50Hz, 4:2:2 @60 / 50Hz, 4:2:2 @60Hz, 4:2:2
@50Hz, 4:2:2

Compatible Audio Format

3G-SDI HD-SDI SD-SDI

Max. Transmission Distance 75 ohm coaxial cable

3G-SDI HD-SDI SD-SDI

48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asynchronized Video
150m at 2.97Gb/s 250m at 1.485Gb/s 480m at 270Mb/s

UM-CV-751-RP-HW719-Q221V1

P.8

www.austin-hughes.com

< 3.2 > Options : MCS ( Multi-display Control )

RP-HW719
More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various CyberView LCD display up to 64 units.

The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.

Designed for use with CyberView LCD displays, Austin Hughes provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty.

HDMI

Audio Power BNC S-Video

out – in – in Video PC

MCS

VGA

DVI-D

set out in

Link

*** Please download the protocol of MCS control at :
http://www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MCS.pdf

*** For MCS option, casing depth will be changed.

RS-232C
15 feet serial cable ( over 15 feet, extender required )

Set switch For the 1st and last display, push the set switch upward
For other daisy chain displays, push the set switch downward

LINK

OUT

IN

OUT

IN

RJ-45 jack

Cat5 / 6 cable max. 300 meters

UM-CV-751-RP-HW719-Q221V1

Cat5 / 6 cable max. 300 meters
Daisy chain up to 1,000 meters and 64 displays
P.9

OUT

IN

Cat5 / 6 cable max. 300 meters

OUT

up to 64 displays www.austin-hughes.com

< 3.3 > AV2.2D Upgrade Options :
– DVI-D ( DVI-D TMDS single link ) – AV ( S-Video + Composite, BNC ) – Audio ( Built-in Dual Stereo Speakers, 2W x 2 )
( 3.5mm audio jacks for audio in & out )

DVI-D

Audio

Power BNC S-Video VGA

out – in – in Video PC

< 3.4 > AV2.2H Upgrade Options :
– HDMI ( HDMI 1.2, CEA-861-D ) – AV ( S-Video + Composite, BNC ) – Audio ( Built-in Dual Stereo Speakers, 2W x 2 )
( 3.5mm audio jacks for audio in & out )

( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.

Audio

Power BNC S-Video VGA

out – in – in Video PC

HDMI

UM-CV-751-RP-HW719-Q221V1

P.10

www.austin-hughes.com

< 3.5 > AV3.0 Upgrade Options :
– HDMI ( HDMI 1.3, CEA-861-D ) – DVI-D ( DVI-D TMDS single link ) – AV ( S-Video + Composite, BNC ) – Audio ( Built-in Dual Stereo Speakers, 2W x 2 )
( 3.5mm audio jacks for audio in & out )

RP-HW719

( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.

DVI-D

Audio

Power BNC S-Video VGA

out – in – in Video PC

HDMI

UM-CV-751-RP-HW719-Q221V1

P.11

www.austin-hughes.com

< 3.6 > Options : Touchscreen & driver

W19″ USB Touchscreen Specification

Model Technology Touch Point Method Activation Force Durability Response Time Optical Transmittance Surface Hardness Haze Glass Connector Compatibility

TRB e-Resistive

TCB e-Capacitive

5-Wire Resistive

Capacitive

Single

Single

Stylus or Finger

Finger

50g / Stylus=R0.8

50g

35 million touches

300 million touches

15 ms

20 ms

80% ± 3%

87% ±2%

3H

9H

8% ± 3%

7%

3.2 ±0.2 mm

2.8 mm ±10%

USB Type A

Windows 7 / XP / Vista, Linux

USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc For detailed information, please refer to the attached CD disc As the touchscreen unit is not made of toughened glass, please handle it carefully

USB Touchscreen

DVI-D

Power

VGA

Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below :
http://www.austin-hughes.com/resources/driver/rackmount-display Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration after the first setup

UM-CV-751-RP-HW719-Q221V1

P.12

www.austin-hughes.com

< 3.7 > Options : DC Power

Model Input rating Input voltage: Input range: Input current – No load – Full load Output rating Output voltage: Output current:
Efficiency

24V
24-Volt 18 ~ 36V
50 mA 4880 mA
12-Volt 4.16A 85%

48V
48-Volt 36 ~ 75V
50 mA 2442 mA
12-Volt 4.16A 85%

*** For DC power option : ( 1 ) If the unit with LCD, earthing may be required

RP-HW719
125V
110-Volt 66 ~ 160V
35 mA 749 mA
12-Volt 6.25A 91%

UM-CV-751-RP-HW719-Q221V1

P.13

www.austin-hughes.com

< 3.8 > Options : MIL-type or Lockable Connector

MIL – type Connector

Input
DC Power ***
( Male )

Part no. MS3470W8-33P

VGA ***
( Male )

MS3470W14-15P

MIL Standard MIL – DTL – 26482
MIL – DTL – 26482

*** There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us.

Lockable Connector

Input
DC Power ( Male )

Part no. YM-Ext-461CP001

USB

LUSB – A111 – 00

Standard D-type 3W3
–

*** MIL – type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.

UM-CV-751-RP-HW719-Q221V1

P.14

www.austin-hughes.com

Intentionally Left Blank

UM-CV-751-RP-HW719-Q221V1

www.austin-hughes.com

The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2021 Austin Hughes Electronics Ltd. All rights reserved.

UM-CV-751-RP-HW719-Q221V1

www.austin-hughes.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>