InfinityLAB INFILINSSTAND Wireless Charging Station Instructions
- June 6, 2024
- InfinityLAB
Table of Contents
Safety Instruction and Warranty Card
PRODUCT REGISTRATION
register.infinitylab.com
SIGN UP & STAY TUNED
Register your product
https://register.infinitylab.com/?utm_source=WQR
*Product registration may not be available for all countries
Download the full warranty Card and safety information and other helpful information from our website: www.infinitylab.com/warrantyandsafetybooks
https://www.infinitylab.com/warrantyandsafetybooks
IMPORTANT SAFETY INSTRUCTIONS
For all products:
WARNING: WHEN USING THIS APPARATUS, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Clean only with a dry cloth.
- This product should be operated only in open-air conditions. It should not be operated in an enclosed, unventilated space such as a carrying bag, pocket, purse, or bedding. Failure to follow these instructions may damage the product by overheating.
- Do not store devices in a high-temperature environment, including heat caused by intense sunlight or other forms of heat.
- Do not expose the device to fire or other excessively hot environments or extremely low air pressure. Exposure to fire or temperature above 45°C (113°F) or extremely low pressure may cause an explosion.
- Do not expose this apparatus to rain or snow, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not use the apparatus in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
- Do not disassemble this product or attempt to re-purpose or modify it in any manner. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact the manufacturer.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the enclosure is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- To disconnect this apparatus from the AC mains completely, disconnect the plug from the AC receptacle.
- The main plug of the apparatus shall remain readily operable.
- This apparatus is intended to be used only with the power supply and/or charging cable provided by the manufacturer.
- Do not use this apparatus near water.
- Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THIS SYMBOL ON THE PRODUCT MEANS THERE IS AN UNINSULATED, DANGEROUS VOLTAGE WITHINTHE PRODUCT ENCLOSURE THAT MAY PRESENT A RISK OF ELECTRICAL SHOCK.
**** THIS SYMBOL ON THE PRODUCT MEANS THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS GUIDE.
CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B)
FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY
HARMAN International hereby declares that this equipment is in compliance with
the FCC Part 15 Subpart B.
The declaration of conformity may be consulted in the support section of our
Web site, accessible from www.infinitylab.com
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.
For Products That Transmit RF Energy:
(i) FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules and Industry
Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) This device may not cause harmful interference; and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
(ii) FCC/IC Radiation Exposure Statement
This equipment complies with FCC/ IC RSS-102 radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.
Correct disposal of this product (Waste Electrical & Electronic
Equipment)
This symbol means the product must not be discarded as household waste and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
where you bought this product.
This product is RoHS compliant.
This product is in compliance with Directive 2011/65/EU, and its amendments,
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production and use of chemical
substances and their potential impacts on human health and the environment.
Article 33(1) of REACH Regulation requires suppliers to inform the recipients
if an article contains more than 0.1 % (per weight per article) of any
substance(s) on the Substances of Very High Concern (SVHC) Candidate List
(‘REACH candidate list’). This product contains the substance “lead”(CAS-No.
7439-92-1) in a concentration of more than 0.1% per weight.
At the time of the release of this product, except for the lead substance, no
other substances of the REACH candidate list are contained in a concentration
of more than 0.1% per weight in this product.
Note: On June 27, 2018, lead was added to the REACH candidate list. The
inclusion of lead in the REACH candidate list does not mean that lead-
containing materials pose an immediate risk or result in a restriction of the
permissibility of its use.
For Products That Include Batteries
Instructions for Users on Removal, Recycling, and Disposal of Used Batteries
To remove the batteries from your equipment or remote control, reverse the
procedure described in the owner’s manual for inserting batteries. For
products with a built-in battery that lasts for the lifetime of the product,
removal may not be possible for the user. In this case, recycling or recovery
centers handle the dismantling of the product and the removal of the battery.
If for any reason, it becomes necessary to replace such a battery, this
procedure must be performed by authorized service centers.
In the European Union and other locations, it is illegal to dispose of any
battery with household trash. All batteries must be disposed of in an
environmentally sound manner. Contact your local waste-management officials
for information regarding the environmentally sound collection, recycling, and
disposal of used batteries.
WARNING: Danger of explosion if the battery is incorrectly replaced. To
reduce the risk of fire, explosion or leakage of flammable liquid/ gas, don’t
disassemble, crush, puncture, short external contacts, expose to temperature
above 60°C (140°F), sunshine or like, expose to extremely low air pressure or
dispose of in fire or water. Replace only with specified batteries. The symbol
indicating ‘separate collection’ for all batteries and accumulators shall be
the crossed-out wheeled bin shown below:
For All Products with Wireless Operation:
HARMAN International hereby declares that this equipment is in compliance with
the essential requirements and other relevant
provisions of Directive 2014/53/EU and UK Radio Equipment Regulations 2017.
The declaration of conformity may be consulted in the support section of our
Web site, accessible from www.infinitylab.com.
HARMAN International Industries, Incorporated. All rights reserved.
Infinitylab is a trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other
countries. Features, specifications and appearance are subject to change
without notice.
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4545 (USA only)
SSJ2020-001
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>