InfinityLAB ILCLEARCALL Speakerphone Instruction Manual
- June 5, 2024
- InfinityLAB
Table of Contents
InfinityLAB ILCLEARCALL Speakerphone Instruction
IMPORTANT SAFETY INSTRUCTIONS
For all products
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not block any ventilation openings. Install this apparatus in accordance with the manufacturer’s instructions.
- Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Use only attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- To disconnect this apparatus from the AC mains completely,
- The mains plug the shall remain readily operable.
- Do not expose batteries to excessive heat such as sunshine, fire, or the like.
- This apparatus is intended to be used only with the plug and/ or charging cable provided by the manufacturer.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
- THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSON
- THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT.
- WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. CAN
ICES-3(B)/NMB-3(B)
FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY
HARMAN International hereby declares that this equipment is in compliance with
the FCC Part 15 Subpart B.
The declaration of conformity may be consulted in the support section of our
Web site, accessible from www.infinitylab.com
Federal Communication Commission Interference Statement This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.
For Products That Transmit RF Energy
FCC AND IC INFORMATION FOR USERS This device complies with Part 15 of the FCC
rules and Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC/IC Radiation Exposure Statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
FOR ALL EU COUNTRIES
WEEE Notice
- The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 14/02/2014, resulted in a major change in the treatment of electrical equipment at end-of-life.
- The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. The WEEE logo on the product or on its box indicating collection for electrical and electronic equipment consists of the crossed-out wheeled bin, as shown below.
This product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 31/03/2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production and use of chemical
substances and their potential impacts on human health and the environment.
Article 33(1) of REACH Regulation requires suppliers to inform the recipients
if an article contains more than 0.1% (per weight per article) of any
substance(s) on the Substances of Very High Concern (SVHC) Candidate List
(‘REACH candidate list’). This product contains the substance lead” (CAS-No.
7439-92-1) in a concentration of more than 0.1% per weight At the time of the
release of this product, except for the lead substance, no other substances of
REACH candidate list are contained in a concentration of more than 0.1% per
weight in this product.
Note: On June 27, 2018, lead was added to the REACH candidate list. The
inclusion of lead in the REACH candidate list does not mean that lead-
containing materials pose an immediate risk or result in a restriction of the
permissibility of its use. For Products That Include Batteries
EU Batteries Directive 2013/56/EU
A new battery directive 2013/56/EU on Battery and Accumulator replacing
directive entered into force on 01/07/2015. The directive applies to all types
of batteries and accumulators (AA, AAA, button cells, lead-acid, rechargeable
packs) including those incorporated into appliances except for the military,
medical, and power tool applications. The directive sets out rules for the
collection, treatment, recycling, and disposal of batteries, and aims to
prohibit certain hazardous substances and improve the environmental
performance of batteries and all operators in the supply chain. Instructions
for Users on Removal, Recycling, and Disposal of Used Batteries To remove the
batteries from your equipment or remote control, reverse the procedure
described in the owner’s manual for inserting batteries. For products with a
built-in battery that lasts for the lifetime of the product, removal may not
be possible for the user. In this case, recycling or recovery centers handle
the dismantling of the product and the removal of the battery. If for any
reason, it becomes necessary to replace such a battery, this procedure must be
performed by authorized service centers. In the European Union and other
locations, it is illegal to dispose of any battery with household trash. All
batteries must be disposed of in an environmentally sound manner. Contact your
local waste-management officials for information regarding the environmentally
sound collection, recycling, and disposal of used batteries.
WARNING: Danger of explosion if the battery is incorrectly replaced. To
reduce the risk of fire or burns, don’t disassemble, crush, puncture, short
external contacts, expose to temperature above 60°C (140°F), or dispose of in
fire or water. Replace only with specified batteries. The symbol indicating
‘separate collection’ for all batteries and accumulators shall be the crossed-
out wheeled bin shown below
For All Products Except Those with Wireless Operation:
HARMAN International hereby declares that this equipment is in compliance with the EMC 2014/30/EU Directive, LVD 2014/35/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.infinitylab.com For All Products with Wireless Operation: HARMAN International hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.infinitylab.com HARMAN International Industries, Incorporated. All rights reserved. Infinitylab is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>