Dongguan Moyin Acoustic DHLINEAR DHL In-Ear Wireless Earbuds User Manual
- June 6, 2024
- Dongguan Moyin Acoustic
Table of Contents
DHL in-ear
Wireless Earbuds User Manual
Getting Started
Remove the earbuds from the box. Please retain all packaging until you have
checked and counted all the parts and the contents against the parts list.
Pairing mode-Auto pairing:
Pairing name: DHL in-ear
Remove your earphones from the charging station, they will turn on and pair
with one another automatically. Once the earphones are paired either LEFT or
RIGHT earphone will flash red and blue alternately waiting to be paired to a
device. The earphones will appear as ” DHL in-ear ” in the list of available
Bluetooth devices. Select it and connect. When you put the earphones back in
the charging station they will turn off automatically and begin to charge if
needed. When your earphones are off, press and hold the button for 3 seconds
to turn on your earphones. If your earphones are already on, press and hold
the button for 5 seconds to turn off your earphones.
Key function:
| Long press for 3 seconds | Power on |
|---|---|
| Long press for 5 seconds | Power off |
| Short press | Music pause/Music play/Answer the phone/Hang up |
| Double press | Skip songs |
| Triple press | Volume + / – |
Indicator light status
| Pairing Mode | Working | Charging | Full charging |
|---|---|---|---|
| Light flashes in red/blue | Blue light blinks slowly | Red lights bright | |
| constantly | Blue light bright 30 seconds constantly then off. |
Specification
- Bluetooth version: 5.0
- Bluetooth frequency: 2402-2480MHz
- Frequency response: 20Hz-20kHz
- Max transmitted power: 4dBm
- Power supply: Built-in battery
- Battery capacity: 35mAh/earbud, 300 mAh/charging case
- Charging voltage: DC 5V
- Operation range: 10m
- Playing time: Up to 13+ hours with charging station
- Charging time: 1-2h
SAFETY INSTRUCTIONS
- The battery shall not be exposed to excessive heat such as sunshine.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
Guidelines for protection of the environment.
This appliance should not be put into the domestic garbage at the end of its
useful life, but must be disposed of at a central point for recycling of
electric and electronic domestic appliances.
This symbol on appliance, instruction manual and packaging puts your attention
to this important issue. The materials used in this appliance can be recycled.
By recycling used domestic appliances you contribute an important push to the
protection of our environment. Ask your local authorities for information
regarding the point of recollection.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The devices has been evaluated to meet general RF exposure requirement. the
device can be used in portable exposure condition without estriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>