PULSAR C9871 Shocky Pro Brushless Motors User Manual
- June 6, 2024
- Pulsar
Table of Contents
PULSAR C9871 Shocky Pro Brushless Motors User Manual
Congratulations for purchasing your new PULSAR Brushless
Motor! Using the Smartphone QR Code right [!] here, you can access our website
and all 1 relative information’s and extensive manual
WARNING Never shorten or lengthen motor wires. Loss of Warrenty. Each
single motor undergoes many quality checks before shipping. Burned motors do
not apply to warrenty.
Too large propellers, too high battery voltage can result in burning.
Propellers
Choice of propellers depends on the use of the model and the battery. Find a listing of suitable Propllers including all data on our website. Make sure to never exceed the voltage/amp limitations.
Speed Controller
ESC For maximum performance, werecommend PULSAR brushless ESCs. They are
small, powerful and also available in 4D (forward/reverse) versions.
Motor connection can be established by soldering the cables, or using 2.0mm
Gold Plugs.
Motor Installation
Mount the motor to the model using the supplied screws. By swapping 2 of the 3 motor cables you can change the turning direction of the motor. Propellers are attached with rubber O-Rings.
Battery Choice
We do clearly recommend our LEMONRC LiPo batteries. They will unleash the
maximum power from your new PULSAR motor. Please visit our website, to team
which type suits best to your parlicular need.
Do you want the perfect battery for your new Motor? LEMONRC LiPo Akku 350mAh buy now and save! Coupon Code: