Shaoxing Shangyu Green L Digital Photographic Equipment WA-MPD36 Multipod Selfie Tripod User Manual

Shaoxing Shangyu Green L Digital Photographic Equipment WA-MPD36 Multipod

Selfie Tripod

PRODUCT INTRODUCTION PARTS

INSTALLATION

USING YOUR MULTI POD WITH A SMARTPHONE

1. A1tached the Smart Phone holder to the tripod mount turning it clockwise.
2. Tighten the holder until secure. Do not force or over tighten mount
3. Put smart phone into holder. Smart Phone should fit securely

USING YOUR MULTI POD WITH AN ACTION CAMERA

1. A Hach 1he action camera mount to the 360° boll head by turning it clockwise to tighten.
2.  Attach your action camera to the action camera mount, tightening the screw until secure.
3.  Do not force or over tighten mount.

USING YOUR MULTI POD WITH A DIGITAL CAMERA

1. Attach your digital camera to the 360° ball head, and tighten by turning clockwise.
2. Do not force or over tighten digital camera to mount.
3. Do not use cameras over lib of weight.

USING YOUR MULTIPOD

1. Lift the top of the smartphone mount and insert your smartphone.
2. The included wireless shutter release is compatible with 105 and Android devices.
3. Make sure, the wireless shutter remote is charged. To charge it, insert the included micro USB coble and connect it to a wall outlet or USB port on a computer

CONNECTING SHUTTER REMOTE TO SMARTPHONE

1.  Make sure remote is charged, slide the side switch/button downward to turn on re more
2.  Blue light will turn on & stay solid for 2·3 second, then will blink ( this is discover mode)
3. Go to Bluetooth menu on mobile device, make sure your device is discoverable
4. Blue1ooth shutter name is labeled M0-09 Bluetooth
5. Press the option to start pairing (you may need to turn your device’s discovery mode off & on to pair)
6. Once remote pairs with device, blue light will no longer be visible

USING YOUR MULTIPOD AS A TRIPOD

1. Connect your action camera, digital camera, or smartphone to the multipod, following the directions described above.
2. Extend the three (3) legs of the tripod fu11yand place it on a flat level surface.
3. By loosening the locking collar, you con adjust the height of the tripod.
4. Loosen the screw and slide the tripod head up to your desired height, then re-tighten the screw.
5. To have the multi pod in a standing state, push the center metal post upwards for the tripod ta become balanced on all three (3) of the supporting legs.

FEATURES
This device can be used to take “selfie style pictures with any smartphone or digital camera. In order to get the best results, please read this manual before using your device.

SPECIFICATION

• Height adjustable from 7″ to 36″

SPECIFICATION (Wireless shutter release)

• Range: 10 meters
•  Frequency: 2.4 Ghz

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica­tions.

However, there is no guarantee that interference with not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures·

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AZHI-WA-MP006

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>