Raritan LVD-102 DVI Video Splitter User Guide
- June 9, 2024
- Raritan
Table of Contents
QUICK SETUP GUIDE
LVD-102 DVI Video Splitter
The Raritan LVD-102 DVI Video Splitter is an active 2-port DVI Video Splitter that allows two DVI monitors to display the same video source from a single PC. The LVD-102 supports digital video (1920 x 1200) for your maximum flexibility in adapting to your display requirements. Its digital video bandwidth is up to 165 MHz (digital) which supports up to 1920 x 1200 (digital) resolution. While splitting the video signals to multiple DVI monitors/Flat Panel Displays, the image quality is not degraded at all and stays crisp and clear throughout. The LVD-102 will be your ideal solution for showroom and classroom presentations.
Features
- 2-port DVI Video Splitter
- DVI Single Link technology supports digital video signal transmission• DDC2B emulation
- Displays the same video source to 2 DVI monitors/Flat Panel Displaysfrom a single PC
- Video bandwidth up to 165 MHz (digital)
- Supports up to 1920 x 1200 resolution
- Simultaneous monitor display
- Power LED indicator for power status monitoring
- Plug-and-play, no extra software needed
Specifications
- Video Input Connector: 1 x DVI-D Single Link (Male).
- Video Output Connector: 2 x DVI-D Single Link (Male).
- Display Resolution: 1920 x 1200.
- Recommended Monitor Cable Length: 5m.
- Housing: Plastic.
- Size: Dongle.
- Unit Dimensions (LxWxH), w/o cables: 63 x 40 x 20.5mm.
- Power: USB 5V.
- Safety / EMI: CE, FCC Certified.
Setup
You can set up two monitors to get the output using the LVD-102 DVI Video
splitter. It is important to establish the first port (EDID Port) connection
first to get the video output on second port, otherwise you will not see
anything on second port.
To setup the connection
-
Connect the DVI-video output of your computer to the LVD-102 with its attached DVI-input cable.
-
Connect the LVD-102’s USB power cable to power ON.
A green LED indicator lights up when LVD 102 is powered on. -
Connect two DVI monitors to the LVD-102 with its attached DVI-output cables.
Note: Always connect the LVD-102’s first port which is the EDID Port to the first DVI monitor at its lowest native resolution settings. -
Once connected, the LVD-102 applies the setting of first DVI monitor on port 1 to port 2 for the second DVI monitor.
LVD-102 QSG
LVD-102-QSG-revA1 255-80-0073-00
Documents / Resources
|
Raritan LVD-102 DVI Video
Splitter
[pdf] User Guide
LVD-102 DVI Video Splitter, LVD-102, DVI Video Splitter, Video Splitter,
Splitter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>