FLSUN S1 Ultra High Speed 3D Printing Instruction Manual
- June 1, 2024
- FLSUN
Table of Contents
- FLSUN S1 Ultra High Speed 3D Printing
- Product Usage Instructions
- Frequently Asked Questions
- Advice And Guidance
- Parameter
- Component Introduction
- Packing List
- Accessory Box Packing List
- Unboxing
- Screen Installation
- Connect And Power On
- Language Settings
- Customer Support
- FCC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FLSUN S1 Ultra High Speed 3D Printing
Product Specifications:
- Model: OVXQ6
- Power: 9V
- Dimensions: Varies
- Weight: Varies
Product Usage Instructions
Setup
To begin using the product, follow these steps:
- Unpack the product from the box.
- Check all components for any damage.
- Connect the power source as indicated in the manual.
Operation
Once the product is set up, you can operate it by:
- Pressing the power button to turn it on.
- Follow the on-screen instructions for further usage.
Maintenance
To ensure the product’s longevity, remember to:
- Clean the product regularly with a soft, dry cloth.
- Avoid exposing the product to extreme temperatures or moisture.
Frequently Asked Questions
Q: How do I change the settings on the product?
A: To modify settings, navigate to the settings menu using the provided controls and make adjustments as needed.
Q: What should I do if the product stops working suddenly?
A: If the product malfunctions, first check the power source and connections. If the issue persists, contact customer support for assistance.
Q: Can I use the product outdoors?
A: The product is designed for indoor use. Avoid exposing it to outdoor elements to prevent damage.
Instruction Manual
Ultra High-Speed 3D Printing
Zhengzhou Chaokuo Electronic Technology Co., Ltd
Advice And Guidance
- Do not operate the machine according to methods other than those specified in the manual to avoid possible injury or property damage.
- Do not place the printer near flammable, explosive or high heat sources, make sure that the printer is in a cool, dust free and well ventilated area.
- Be careful touching the print bed, print nozzle, or other high temperature areas during or soon after use to avoid severe burns.
- Do you reach inside the print area while the machine is in use to avoid injury from high speed movements.
- Do not allow children or persons who have not read the instructions in detail to operate it alone to avoid personal injury or property damage.
- Routine maintenance should be performed on the printer to ensure a long service life. The printer should be powered off before maintenance is performed, especially important on working parts such as the effector module and guide rails.
- In case of an emergency during printing, press and hold the on/off button for 1.5 seconds to stop the printer, and then turn off the power.
- If the printer is not going to be used for and extended period of time unplug the power cord.
- Each printer is thoroughly tested before leaving the factory to ensure quality and functionality. It is normal to find evidence of prior use.
- Visit the official Flsun Wiki for more tutorials on machine use and maintenance: http://wiki.flsun3d.com/en/home.
Parameter
| PRODUCT | FLSUN S1 |
|---|---|
| Printing Technology | Fused Deposition Modeling (FDM) |
| Printing Accuracy | + 0.1mm |
| Recommended Layer Height | 0.1-0.35mm |
Chassis
| Build Volume| o320 * 430mm
Frame| Full Metal
Dimensions
| Product Dimensions| 5505951030mm
Package Dimensions| 6406801120mm
Net Weight| 41kg
Gross Weight| 52kg
Effector
| Extruder| Dual-Gear Direct Drive Extruder
Nozzle| Hardened Steel
Nozzle MAX Temp| 350C
Nozzle Diameter| 0.4mm
Filament Diameter| 1.75mm
Motor| Motor Types| 36V Closed-loop motor
Motor Calibration| Support
Bed
| Build Plate| Textured PEI Print Surface
Bed MAX Temp| 120C
Smart Zone Heating| Inner Circle o220mm,Outer Ring220-320mm
Materials
| Supported| PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC, Carbon etc.
Drying| Separate Heating elements,Desiccant
Cooling| Fan| CPAP turbofan 40000 rpm
Speed
| MAX Speed| 1200mm/s
MAX Acceleration| 40000mm/s2
MAX Flow Rate| 110mm3/s PLA
PSU
| Input| 110-240V,50/60HZ
Power| 1300W@220V,600W@110V
Electronics
| Display| Full-Integration Touchscreen
---|---|---
Storage| 16GB EMMC,32GB USB Flash
Control interface| Touchscreen, PC Interface
CPU| Quad-Core ARM A7 1.5 GHz
NPU| 2 tops
Camera
| Pixels| 1920 X 1080 pixels
Real-time Monitoring| Support
Time-lapse Photography| Support
Sensors
| Remaining Filament Weight| Dynamic Monitoring
Filament Detection| Support
Filament Clog Detection| Support
Vibration Compensation| Support
Auto-Leveling| Support
AI Lidar Detection
| First Layer Detection| Support
Accuracy Calibration| Support
Flow Calibration| Support
AI Features
| Debris Detection| Support
Spaghetti Detection| Support
Energy Efficiency
| Screen auto sleep| Support
Printer auto power off| Support
Smart Zone Heating| Support
Power Off Resume Print Module| SupportCZ lift, protect model)
Air Filter| Composite filter: HEPA + Activated Carbon
System Upgrade| Upgrade Method| OTA
Software
| Slicer| lsun Slicer, Third-Party Slicers
Supported OS| MacOS, Windows
File Format| ST O 3
Component Introduction
Packing List
Accessory Box Packing List
Unboxing
Screen Installation
Connect And Power On
Language Settings
WiFi Settings
Calibrations
Loading Filament
First Printing
Customer Support
- Please go to flsun official website to download Flsun Slicer : Official website: https://flsun3d.com
Please visit the official Flsun Wiki for more information on machine use, maintenance and FAQs: http://wiki.flsun3d.com/en/home
By scanning the QR code you can choose any channel to get the latest product updates and related news.
- If you need additional assistance, please feel free to contact us:
After-sales e-mail: service@flsun3d.com
Go all the way forward and break through the limitations!
FCC
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interterence received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Bring the personalized production capacity to everyone’s desktop www.flsun3d.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>