MURPISO Wireless Earbuds, Active Noise Cancelling Bluetooth5.2 Deep Bass Headphones-Complete Features/User Instruction
- June 5, 2024
- MURPISO
Table of Contents
MURPISO Wireless Earbuds, Active Noise Cancelling Bluetooth5.2 Deep Bass
Headphones
Specifications
- BRAND: MURPISO
- EAR PLACEMENT: In-Ear
- COLOR: Black
- CONNECTIVITY TECHNOLOGY: Wireless
- MODEL NAME: IPX6
- PRODUCT DIMENSIONS: 2.16 x 0.67 x 1.77 inches
- ITEM WEIGHT: 5 ounces
Introduction
With high-quality audio decoding and 10mm drivers, the MURPISO U-pro 2 stereo wireless earbuds provide more details of immersive and premium bass, making them ideal for phone calls, music, and video. With 4 Mics and Active Noise Cancellation mode, you may have a clear phone conversation with your friend. To decrease noise, the headsets use ANC (Active Noise Cancellation) noise cancelling technology. Three alternative modes: ANC on/ Transparency mode/ ANC off, appropriate for subway, bus, home, office, etc. (Tip: When you test ANC with nothing playing on your earbuds and turn on the TV, you’ll see that the noise from TVs is successfully decreased.) Earbuds can last up to 8-10 hours on a single charge, 35 hours with the charging case, and can be used for up to ten days without needing to be recharged; IPX6 waterproof Bluetooth headphones are resistant to sweat, water, and rain.
With the latest Bluetooth 5.2 technology, earbuds give a quicker and more reliable Bluetooth connection, higher connection distance, and fewer latency and dropouts; one-step rapid pairing, earbuds will immediately connect to the last linked device with the lid of the charging case opening. With an ergonomic design and an additional 5 soft ear-tip sizes, the Bluetooth earbuds are stable and easy to wear for long periods of time. You will be the most fashionable person with a black earbud whether you are working, exercising, or just hanging out.
HOW TO TURN ON
The MURPISO earbuds will automatically turn on when the charging case is opened or taken out of the case, and switch off when the case is closed and the lid is closed. You can also manually turn it on or off by holding the MFB button on the earbuds for around 5 seconds.
HOW TO CONNECT TWO DEVICES SIMULTANEOUSLY
- Device A’s Bluetooth should be turned off.
- Device B’s Bluetooth should be turned on.
- Connect Device B to your Noise One.
- Turn on the Bluetooth on Device A.
- Your Noise One is now connected to both devices.
HOW TO FACTORY RESET
The standard technique for resetting earbuds like these is to 1) place the earbuds in the charging case with the lid open, and 2) press and hold the charging case’s button for 10+ seconds; you should then see a change in the charging case’s indicator light, indicating a successful reset.
Frequently Asked Questions
-
Is there a microphone with them?
The earbuds include four microphones and may be used to listen to music, converse on the phone, and answer calls. Warm tips: For talk and answer calls, it is recommended to utilize “ANC on mode” or “ANC off mode,” which will allow you to be heard more clearly by others. -
Is it possible to use each earbud separately?
Yes, each earbud can connect to your smartphone on its own. If you just wish to use one earbud, press and hold the MFB button for around 5 seconds to switch it off, or put it back in the charging case. -
What can I do if one of my earbuds isn’t working?
Close the charging case and open it again to see whether the earphones flash with blue light; if not, press and hold the MFB button on one of the earbuds for about 5 seconds to manually turn it on and see if the Bluetooth pairing is successful. -
What am I supposed to do to make the noise reduction work?
The earphones can be switched to “ANC on Mode,” “Transparency Mode,” or “ANC off Mode” by holding the right ear MFB buttons for 2 seconds.
When you hear the voice prompt “ANC On,” your earphones are in ” ANC on Mode,” and noise reduction is enabled.
The earbuds are in “Transparency Mode” when you hear the voice prompt “du du du” or “Transparency Mode,” which allows you to hear the sounds around you.
When the voice prompt “ANC off” is heard, both “ANC on Mode” and “Transparency Mode” are turned off.
WARM ADVICE
After around 2 hours of utilizing “ANC on Mode,” switch to other settings to give your ears a rest. -
What is the procedure for turning the earbuds on and off?
The MURPISO earbuds will automatically turn on when the charging case is opened or taken out of the case, and switch off when the case is closed and the lid is closed. You can also manually turn it on or off by holding the MFB button on the earbuds for around 5 seconds. -
How do you make both wireless earbuds function simultaneously?
Double-click each earpiece at the same time, make sure your phone’s Bluetooth is switched off, and they should link. Wait a few seconds, then turn your Bluetooth back on. -
When my wireless earphones are fully charged, how do I know?
When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged. -
Why is it that just one of my earbuds is functioning?
Examine the options. Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal. -
Why am I unable to pair both of my wireless earbuds?
Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot. -
What is the procedure for resetting earbuds plus?
To begin, go to your Galaxy phone’s app store and download the Galaxy Wearable app. Galaxy Buds+, Galaxy Buds Live, Galaxy Buds Pro, and Galaxy Buds2 are all wireless headphones from Samsung. To confirm, hit Watch settings, Reset, and then Reset again. Buds from the Galaxy: Select Earbuds from the drop-down menu. Reset the earphones, then touch Reset again to confirm.