OEM HB030 Wireless Keyboard with Micro USB Charging Cable Instruction Manual
- June 6, 2024
- OEM
Table of Contents
OEM HB030 Wireless Keyboard with Micro USB Charging Cable
PACKGE CONTENTS
- Wireless Keyboard
- Micro-USB charging cable
- Instruction manual
SPECIFICATIONS
| Dimensions | 247.5x150x7mm |
|---|---|
| Operating Range | <10 meters |
| Charge time | <2 hours |
| Uninterrupted Work Time | 40 hours |
| Lithium Battery Capacity | 180 mA |
| Lithium Battery Life | 3 years |
| Key Life | 3 million clicks |
| Stand-by time | 90 days |
LED DISPLAY
| CAPS | The Caps Lock indicator may not light, but will still function normally |
|---|---|
| Will flash blue (3min. long) after pressing the “Connect” button until a BT |
connection is established. It disappears when connected
Charge| Lights red when the keyboard is charging. Turns off when the battery
is fully charged, Flashes red, when the battery is weak anc should be charged
Power| Lights up blue for about 4 sec when being turned on
KEYS AND FUNCTIONS
| Home| | Virtual Keyboard| | Screen
brightness-
---|---|---|---|---|---
| Screen
brightness+
| | Select all| | Copy
| Paste| | Previous Track| | Play/Pause
| Next Track| | Mute| | Volume down
| Volume up| | Fn lock| | Language
switching
Fn+Function Keys Notice
Provide shortcuts to useful functions, first press and hold the FnKey;second,
press the function key you want to use.
PAIRING STEP
Step 1. Turn on the keyboard’s power button.The blue status light will be
on for 4 seconds and then be off
Step 2. Press the connect button, the Bluetooth indicator light will be
blinking blue
Step 3. On the tablet, select: Settings – Bluetooth – On
Step 4. The tablet will display “Bluetooth 3.0 Keyboard” as an available
device Step 5. When you find the device “Bluetooth 3.0 Keyboard” click Pair
Step 6. Press Fn+Q if your device is iOS; press Fn+W if your
device.isAnroid;press Fn+E if your device is Windows
Notice :If you didn’t finish step 6, some Windows systems or Android
system might cannot use the function keys properly. In this situation,you
might disconnect keyboard and dick “Forget This Device” in the bluetooth list
and connect this keyboard following step 1-6 again.
Q: iOS W: Android E: Windows
SPECIAL NOTE
- Only one device can be actively paired at one time
- After pairing for the first time, your device will connect to the keyboard automatically when opening the keyboard next time
- In case of connect failure, delete the pairing record from your device, and try the above procedures again
POWER SAVING MODE
The keyboard will enter sleep mode after being idle for 15 minutes, To
activate it, press any key and wait for 3 seconds
HOW TO CHARGE IT
- Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard
- In charging, the power indicator will turn red. Generally, it takes approximately 2 hours for a full charge(USB charger is not included).
TROUBLESHOOTING
If you are unable to connect the keyboard to vour tablet please try the following
- Starting with a full charge on both devices ensures that process won’t be interrupted by a low battery.
- Check your tablet’s Bluetooth is on
- Make sure that the keyboard is within the effective Operation distance of 33 feet (10m)
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>