SOUNDPEATS B08FTCRLLZ TrueCopsule 2 True Wireless Earbuds User Guide

SOUNDPEATS B08FTCRLLZ TrueCopsule 2 True Wireless Earbuds

Package Content

SPECIFICATIONS

Product Diagram

Control

P o wer On| Automatically: Open the charging case

Manual : Long press the multifunction button for His

---|---
Po wer Off| Automoticol: Place the eabuds bock into the charging ckx:ks and close the chargng case Monucny: Long press the mutifunction button for lOs
Ploy| Automotico : Put on the eabuds

Monuclly: Double clk::k the multifunction button

Pause| Autornotk::ol : Toke off the eorboos

Manually: Double clk::k the multifunction button

Volume­| Click the left multifunction button once
Volume+| Click the right multifunction button once
Previous Track| Long press the left multifunction button for l.Ss
Next Track| Long press the right multifunction button for l.Ss
Answer / Hong Up

Phone Coll

| Double clk::k the multifunction button
Reject Phone Coll| Long press the multifunction button for l.5s
Sv,tch Between Tw o Active Coils| Long press the multifunction button for 2s
Enter Po ng Mode Manuolly| Place the eorboos bock nto the chorgng ckx:ks

and open the charging case, long press the

button of the charging case for 3s

Activate Voice

Assistant

|

Clk::k the multifunction button three times

Wearing the earphones

1.  Identify the left and right earbuds.
2. Rotate the earbuds, and adjust to tind the best angle.

Pairing &Re-pairing

• .When the charging case is powered, open the charging case and ensure that the headphones are in the charging case, then both earbuds wUI enter TWS pairing mode automatically. You will hear a voice prompt when the left and right earbuds connect to each other successfully. Then you need to long-press the button of the charging case for 3s, the LED indicator of the charging case starts to flash in white with a voice prompt “pairing” indicating pairing mode.
• “SOUNDPEATS TrueCapsule2” will show up on the Bluetooth list, click it to connect. you will hear a voice prompt connected from right earbud when the earbuds connect with your device successfully. Then the prompt of “SOUNDPEATST rueCapsule2 L • will show up to request painting, cnck it to complete the painting.

•  SOUNDPEATS TrueCapsule2 Bluetooth earbuds can remember previously paired devices. When you make the second connection, simply activate the Bluetooth in your device, take out the both earbuds from the charging case. They will connect to each other, and reconnect to your device automatically. If the earbud doesn’t automatically connect to your device, please activate the Bluetooth in your device and hit “SOUNDPEATS TrueCapsule2 • on the Bluetooth nst.
• Mono Mode: After successfully pairing of SOUNDPEATS TrueCapsule2. the left and right earbud can be used separately.

Note:

1.  When SOUNDPEATS TrueCapsule2 L requests pairing. please select pairing, otherwise, the earphones can’t be used on mono mode properly.
2. When SOUNDPEATS TrueCapsule2 ls connected with a mobile phone with Qualcomm Snapdragon 855 chip or a higher Qualcomm chip, it will automatically connect the two pairing names without manual pairing again.
3. If you want to change the pairing device in the connected state, please place the earbuds back into the charging docks ard open the charging case, then long-press the button of the charging case for 3s to have it enter pairing mode directly and pair to a new device.

Factory Reset

1. Clear pairing record between the earbuds and all your devices.
2. Place back both earbuds into the charging docks and open the charging case. Then long press the button of the charging case for 10s unti the LED nght of the charging case flash white twice indicating reset successfully.

CHARGING

SOUNDPEAlS TrueCapsule2 Buetoothearphones are equipped with a night weigh charging case which can not only charge the earphones, but also a case that is convenient to carry and store the earphones. Built-in rechargeable battery, can charge two earphones 4 times.

Charging the headset

1. Put the earphones into corresponding charging docks.
2.  The LED indicator of the charging case flash to indicate that the earphones have been successfully placed.
3.  Close the charging case and the earphones start to charge.

Charging the case

1. .Connect the charging port with Type-C charging adapter. (Please make sure the current is not greater than lA)
2. Please charge the case at least once every 3 months when not in use for a long time.

Warranty

We warrant this device 12 MONTI-IS from date of the original purchase for manufacturer defects.
@ support@soundpeatsaudio.com
@ www.soundpeatsaudio.com
Please scan the QR code to check the detailed PDF manual in more detail.

https:/ /soundpeatsaudio.com/downloads/

Qualcomm

• Qualcomm aptX. Qualcomm TrueWlreless and Qualcomm eve are products of Qualcomm Technologies, Inc. and/or its subsidiaries.
• Qualcomm and Qualcomm TrueWlreless are trademarks of Qualcomm Incorporated, registered In the United states and other countries.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user”s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>