SALUS 091FLRFv2 Digital Programmable Thermostat User Guide
- June 6, 2024
- SALUS
Table of Contents
SALUS 091FLRFv2 Digital Programmable Thermostat
PRODUCER:
Salus Limited
6/F, Building 20E, Phase 3,
Hong Kong Science
Park, 20 Science Park East
Avenue, Shatin,
New Territories, Hong Kong
Introduction
091FLv2/091FLRFv2 is a programmable, weekly thermostat used to control room
temperature in heating or cooling systems. Before use please read this manual
carefully. Use only AA 1.5V alkaline batteries in the thermostat. Place the
batteries into the battery slot located under the cover. Do not use
rechargeable batteries.
Product compliance
This product complies with the following EU Directives:
091FLv2: 2014/30/EU, 2014/35/EU, 2011/65/EU
091FLRFv2: 2011/65/EU, 2014/53/EU 868.0 MHz – 868.6 MHz; <13dBm
Full information is available on the website
www.saluslegal.com
Safety Information
Use in accordance with national and EU regulations. Use the device only as
intended, keeping it in a dry condition. The product is for indoor use only.
Installation must be carried out by a qualified person in accordance with
national and EU regulations.
Technical specification
Wired thermostat 091FLv2
| Power supply | 2 x AA batteries |
|---|---|
| Rating max | 5 (3) A |
| Outputs | Voltage-free NO/COM relay |
| Temperature range | 5 – 30°C |
Wireless thermostat 091FLRFv2
| Thermostat supply | 2 x AA batteries |
|---|---|
| Receiver supply | 230 V AC 50 Hz |
| Receiver rating max | 16 (5) A |
| Receiver outputs | Voltage-free NO/COM relay |
| Temperature range | 5 – 30°C |
Proper thermostat placement
Button Functions
| Button | Function |
|---|---|
| Comfort temperature or changing parameters up | |
| Economic temperature or changing parameters down | |
| Set the day of the week | |
| Set the hour | |
| Set the minutes | |
| Temperature setpoint | |
| Weekly programming | |
| Program selection | |
| Confirm function | |
| Factory Reset |
LCD Icon description
- Day of the week indicator
- Heating Mode ON
- Cooling Mode ON
- Room/setpoint temperature
- Temperature unit
- Controlled device working status (e.g. boiler)
- Temporary override
- Eco Mode
- Program number
- Antifrost Mode
- Comfort Mode
- Program timeline indicator
- Clock
- Low battery indicator
- AM/PM
091FLv2 Wiring diagram
091FLRFv2 Wiring diagram
NOTE! If you are using 091FLRFv2 pack, the pairing between the thermostat and the receiver is already done.
Setting Time
Setting the comfort temperature
-
-
- To confirm press OK button.
-
Setting the economic temperature
-
Press OK button to highlight the display.
-
Press and then press Temp.
Display will show current economic temperature. -
To change this temperature, press or button.
Programs
There are 9 programs available. Programs 0-5 are factory programs.
Programs 6-8 can be defined by user.
Selection of factory (0-5) programs
Press OK to h light the display.
-
Select t y of the week by pressing Prog button.
-
Press Prog # to set the program number (0-5) for the selected day.
Program 0 is a special program. It will set the thermostat to antifrost temperature (7°C) for the full day. -
To confirm press OK button.
NOTE! Label with programs descriptions is sticking on the flip side of the cover.
Choosing and programming (6-8) user programs
-
Press OK to highlight the display.
Select the day of the week by pressing Prog button. -
Press Prog # to set the program number (6, 7 or 8) for the selected day.
-
Press or button ach pressing one of these buttons moves the timeline by one hour and assigns a comfortable or an economic temperature).
-
To confirm press OK button.
Service Menu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>