micro MI-CL003 Pro Light Therapy Lamp UV Free 10000 Lux User Manual
- June 6, 2024
- micro
Table of Contents
MI-CL003 Pro Light Therapy Lamp UV Free 10000 Lux
User Manual
Product Diagram
- Lamp
- Power Button
- Timer Buttons
- Light Brightness Button
- Power Port
Features
Your new Miroco light therapy lamp is a remarkable product with many features and benefits:
- Delivers LED light to your home, office, dorm room or apartment.
- Designed with a stable stand for easy placement on a convenient spot.
- Cues your body’s own energy enhancers to help you regain focus and concentration.
- UV-free LED- the built-in LED light panel delivers the full brightness with no pollution, no radiation and no stroboscopic effects.
- 10,000 lux at 10cm/4 from lamp to lift up your spirit.
Important
- Some people may suffer from light sensitivity; discontinue use immediately if any discomfort occurs.
- Consult your health care provider before use of this product if you are under medical care or have suffered from an eye condition before.
- Never cover the lamp or place anything on top of it during operation to avoid overheating or fire hazards.
Specifications
Model | MI-CL003 Pro |
---|---|
Voltage | AC 100-240V 50 / 60Hz DC 12V 1A |
Power | 11 W Max |
Storage Temperature | -20-50°C / -4-122°F |
USING YOUR LIGHT THERAPY LAMP
Power On/Off
Tap the Power Button to turn on/off the lamp.
Note: If power is not disconnected, the lamp will remember the light
brightness of last use when turned on again.
Adjust the Light Brightness
When the lamp is on, tap the Light Brightness Button to set the light
brightness between low/semi medium/medium/high levels.
Set the Timer
- Tap the Timer Buffon to set the timer from 10 minutes to 60 minutes. The timer button indicators will light up accordingly.
- Tap and hold the set Timer Button to turn off the timer.
Warning
- Please keep the lamp away from water or any other liquid to avoid electrical shock.
- For indoor use only.
- Close supervision is needed when used by or near children.
- Keep away from heat and avoid direct sunlight.
- Don’t try to repair or dismantle the lamp by yourself.
- Don’t drop or knock the lamp on hard surfaces.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories, or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their suppliers
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
suoport@mirocohome.com
https://miroco.net
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
MADE IN CHINA
Questions or Concerns?
https://miroco.net