Kontakt Micro-Location Sp z o o KHWBC303F001 Smart Badge 3 Standard Set User Manual

Contact Micro-Location Sp zoo KHWBC303F001 Smart Badge 3 Standard Set

Specifications

• Technology: Chip nRF52832
• Infrared receiver
• Accelerometer LIS2DH/LIS3DH (motion and orientation detection)
• Temperature sensor
• 2 buttons
• Connectivity: Bluetooth v4.2 LE, Bluetooth 5.0
• Operating humidity: 10%~90% (non-condensing)
• Frequency range (MHz): 2402.0 – 2480.0
• Maximum radio power: +4 dBm (2.5 mW)

Product Usage Instructions

Preparation of the Device

1. Find the flyer with your unique order number attached to the package.
2. Create a customer account on start.kontakt.io using the order number to add your devices to the customer panel.
3. Download the app and configure your Smart Badge.
4. The Smart Badge is now operational.

Note: A long press of the button turns off the ID. Activation works oppositely.

Important Safety Measures:

• Do not modify the product to avoid warranty expiration.
• Avoid subjecting the product to mechanical pressure.
• Do not leave the packaging unattended as it may pose a choking hazard to children.
• Use the device only in dry indoor environments.
• Service, adjustments, or repairs must be carried out by the manufacturer or authorized experts.

Support

In case of malfunction, contact technical support at support@kontakt.io for assistance and warranty replacements.

Introduction

For proper operation, it is necessary to use the entire set of 20 devices.
To individually assign a Smart Badge to a user, follow the automatic online configuration process on cloud.kontakt.io

Preparation of the device

1. Please find a flyer with your unique order number as an attachment to your package.
2. Using the start.kontakt.io website, create a customer account and use the order number to add your devices to the customer panel
3. Download the app and configure your Smart Badge
4. The Smart Badge is now operational.
5. LA long press of the button allows you to turn off the ID. Activation works in the opposite way

The device is ready to be used in an ‘out of the box’ manner. The device is ready to perform as soon as it is programmed and assembled. Smart Badge constantly broadcasts Bluetooth signals for tracking purposes. Smart Badge constantly scans for Infrared signals for location tracking purposes. In case of possible malfunctioning, users are advised to contact technical support to get assistance and replacement of devices not working and are still under warranty. Contact support at: support@kontakt.io

Application

• The Smart Badge is designed to be worn around the neck by humans.
• The Smart Badge has a hole in the handle to hang it on a lanyard.
• The Smart Badge housing allows you to insert a standard employee ID / key card.

Physical characteristics

• The manufacturer and device name are included on the original box the device arrives in.
• Size of the device: 106,28 mm x 57,80 mm; 6,50 mm.
• The device is equipped with 2 board-mounted buttons. |
• The device casing is factory-sealed and cannot be opened.
• The device comes in a dedicated reopenable card holder.

Technology

• Chip nRF52832
• Infrared receiver
• LIS2DH / LIS3DH accelerometer (motion and orientation detection)
• Temperature sensor
• 2 buttons

Communication:

• Bluetooth v4.2 LE, Bluetooth 5.0

• Range up to 30 meters
  Technical requirements

• Working temperature 0ºC ~ 55ºC

• Operating humidity 10% ~ 90% – non-condensing

Frequency (MHZ range): 2402.0 – 2480.0 Maximum radio power: +4 dBm (2.5 mW)

WARNING: Smart Badge contains electronic elements and a battery (model: CP224147) which should be properly disposed of. If a beacon needs to be disposed of, please contact the manufacturer’s technical support first.

FCC

FCC Caution
This device complies with part 15 of applicable FCC Rules. Its operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Produced for:

• Kontakt Micro-Location Sp. z o.o.
• ul. Stoczniowców 3
• 30-709 Kraków
• POLAND

Kontakt Micro-Location Sp. z
o.o.hereby confirms that the devices are compliant with CE RED directive 2014/53/UE.
Full Declaration of Conformity text can be found under the link: http://www.kontakt.io/compliance-smart-badge

Frequently Asked Questions

Q: What should I do if my Smart Badge is not responding?

A: If your Smart Badge is not responding, please contact technical support for assistance and possible warranty replacement.

Q: Can I modify the Smart Badge without voiding the warranty?

A: Modifying the Smart Badge will void the warranty, so it is not recommended to do so.

Q: Is it safe to use the Smart Badge around children?

A: It is recommended to keep the Smart Badge and its packaging away from children to prevent any potential hazards.

Q: How do I turn off the Smart Badge ID?

A: Long press the button to turn off the ID. The activation process works oppositely.

References

• Kio Cloud | Kontakt.io
• Kontakt.io - Indoor Journey Analytics Platform with AI, IoT, and RTLS
• Kontakt.io - Indoor Journey Analytics Platform with AI, IoT, and RTLS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>