beamz Ice 1200 MKII Ice Groung Fogger Instruction Manual

June 6, 2024
beamZ

Ref. Nr. 160.515

ICE FOGGER
ICE 1200 MKII

INSTRUCTION MANUAL ****

Warning:

– The smoke machine must be placed at least 100 cm away from inflammable materials such as curtains, books, etc. Make sure that the housing cannot be touched by accident.
– Use only Beamz water-based smoke fluid recommended by your dealer.
– Poor smoke liquid caused permanent damage, bad effect, clogging, spitting of unevaporated liquid etc.
– Never add flammable fluids (oil, gas, perfume) to the fog liquid.
– Always keep enough smoke liquid in the tank.
Use of the device without liquid will cause damage to the pump and heater.
– Do not obstruct the openings on top of the case to guarantee good ventilation.
– Don’t put any objects on the smoke machine.
– For indoor use only.
– During installation, nobody should stand beneath the mounting area.
– Prior to the first use, have the unit checked by a qualified person.
– The unit contains voltage carrying parts. DO NOT open the smoke machine
– Never plug or unplug the unit with wet hands.
– If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
– If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet. It needs to be repaired by a qualified technician.
– Only connect this unit to an earthed mains outlet of 220-240Vac/50Hz .
– Always unplug the unit during a thunderstorm or when it is not in use.
– If the unit has not been used for a longer period of time, condensation can occur inside the housing. Please let the unit reach room temperature prior to use.
– When you unplug the unit from the mains always pull the plug, never the lead.
– In order to prevent the dropping of the unit, a safety fastening needs to be installed. This can be a solid chain, a steel cable, etc. which has to be fastened separately from the mounting bracket.
– The supplied bracket is the main fixing and must be used to solidly mount the light effect.
– In order to avoid accidents in public premises, the local legal requirements and safety regulations/warnings must be fulfilled.
– Keep out of the reach of children.

Location
Select a location where it is easy to fill the tank.

Installation and Use

Unpack the fog machine. Do not connect yet the net cable. Fill the fluid tank by means of a funnel. Fill the ice tray with ordinary ice. Close the drain valve off. (Once the ice has melted, you can drain the water here.) When the machine is filled with ice, the lid can be closed.
Attention: Drain the water, melted ice regularly. (approximately every 45 minutes)
Plug the unit into the main outlet. Thus the heating element is automatically switched on. Depending on the room temperature, it takes about 5 minutes until the working temperature is reached. Then the thermostat is clicking and the LED on the manual control lights up. Push the switch once and the smoke machine will produce a nice thick fog. Once the smoke machine has reached its working temperature (the LED is lit) the smoke machine can produce fog for a while. After this period of time, the fog generator is cooled so much down that the thermostat switches off. Wait a while until the working temperature is reached again. It is recommended to produce smoke with small pauses in between so that the temperature is maintained and the thermostat doesn’t switch off. Make sure that there is always enough liquid smoke contained in the tank. The use of the smoke machine without liquid can permanently damage the unit. Once the smoke machine generates little smoke or pumps generate another ‘rattling’ sound I turn off the unit directly. Check the fluid level and fill the tank when it is empty, check the hose and filter blockages, and restore it. Plugin the unit and check if the problem is resolved. If the problem persists, switch the unit direct off to prevent further damage and contact your dealer.

Switching the unit off
Switch the unit off by unplugging it from the mains. otherwise, the 1200W heating element will draw unnecessarily current.

ICE cooling: A 1200W professional ice fogger using ice to cool the smoke- producing heavy fog that creeps along the floor. Suitable for various venues, live performance stages, and theatres. Equipped with a high-quality heating element and a large fluid tank. Supplied with remote control

Maintenance
Refilling the fluid reservoir should be done carefully. Remove the plug from the mains first! Then unscrew the cap of the reservoir and fill it by means of a suitable funnel. Use only the original Beamz smoke liquid. This fluid is environmentally friendly, biodegradable and leaves no residue when used correctly. Make sure the smoke liquid becomes contaminated, close the cap of the liquid smoke can and after filling tank right. After 40 hours, the smoke machine must be cleaned to avoid deposits in the machine, pump and heater.

Clean procedure
Run clean procedure in a well-ventilated area

  • Remove smoke liquid from the tank, add cleaning solution to tank
  • Switch smoke machine and wait until it is warm-up
  • Press the button to switch the liquid pumped through the machine
  • Perform the above operation until the tank is empty
  • Fill the tank with liquid smoke

Specifications

Power supply: ………………………………………………….. 230V~/50Hz
Heating element: ………………………………………………… 1200 watts
Heat up time: ……………………………………………………. 2,5 minutes
Smoke production: …………………………………… ca. 125 m3/minute
Tank capacity: ……………………………………………………….. 1,3 liters
Dims: ……………………………………………………. 435 x 335 x 255mm
Weight ……………………………………………………………………… 7,9 kg

Accessories

Smoke fluid, high-quality fluid on a water basis, specially designed for Beamz smoke machines. Guarantees trouble-free use.

5-liter packaging, ref. no. 160.582 160.583 160.586
1-liter packaging, ref. no. 160.643 160.644

Flavor, adds a pleasant fragrance to the air. One bottle is sufficient for a 5-liter smoke fluid.
coconut 160.650 tropical 160.653
mint 160.651
strawberry 160.654
vanilla m160.652 energizer 160.655

Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Tronios BV cannot be held responsible for personal injuries caused by the disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed.

www.tronios.com
Copyright © 2021 by TRONIOS the Netherlands

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals