Dualit ARCHITECT Kettle Panels Instruction Manual
- June 6, 2024
- Dualit
Table of Contents
Dualit ARCHITECT Kettle Panels Instruction Manual
Instructions
CAUTION! Edges may be sharp. Use and clean with care.
-
Unplug and empty the kettle. Ensure it has cooled down to room temperature. Risk of scalding and electric shock.
-
Using a Phillips screw driver (PH2), unscrew and remove the lid and
body panels.
NB. Do not operate the kettle with the panels removed.
-
Align the new panel with the screw holes on the lid of the kettle. Loosely screw both screws into position. Tighten to secure.
-
Align the new panel with the screw holes on the body of the kettle and tighten the first screw.
-
Ensure panel is fully located into recess.
-
Align and tighten the second screw.
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
+44(0)1293 652 500 info@dualit.com
www.dualit.com