CALIBER HPA 605BT Bluetooth Speaker User Manual

: June 6, 2024
: CALIBER

Table of Contents

CALIBER HPA 605BT Bluetooth Speaker
SPECIFICATIONS, REMOTE CONTROL
institution
CONNECTIONS AND BUTTONS
Precautions
Connecting an external battery
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CALIBER HPA 605BT Bluetooth Speaker

SPECIFICATIONS, REMOTE CONTROL

Bluetooth® version: 5.0 supports A 2DP & AVRCP profile
Bluetooth® range: up to 10 meters (without barrier)
Transmission: Bluetooth®: Freq range: 2402-2480 Mhz / Max e.r.p: <100mW/20dBm Wireless mic 1: Freq range: 864.9 MHz/ Max e.r.p: <10mW/10dBm Wireless mic 2: Freq range: 863.0 MHz/ Max e.r.p: <10mW/10dBm
Speakers HPA605BT: 1x subwoofer (12″ 130cm) 1x tweeter (1″ 12,5cm)
Max. speaker power: 250W RMS Power: 1 00W
Built-in connections: – USB – SD – RCA connection (AUX-in) – AUX-in 3.5mm jack input – 2x Microphone-in XLR connection – 2x UHF MIC “ready” (Wireless mic HPA605MIC1 included, wireless mic HPA605MIC2 sold separately) – Jack input 1/4″
Power supply: – HPA605BT Built-in rechargeable battery 12V / ?A (up to 3 hours playtime) 110-240V, ~ 50Hz / 60Hz (power and charger) – DC Optional external 12V battery
Dimensions: 423(W) x 435(0) x 635(H) mm (HPA605BT )
Wireless mic “HPA605MICI” included
Wireless microphone “HPA605MIC2” sold separatley

institution

POWER BUTTON Device ON / OFF
STOP stop playback
MUTE mute all sound
REPEAT
MODE BUTTON switch between audio sources
PREVIOUS/ NEXT BUTTON
PLAY/PAUSE BUTTON
EQ BUTTON Normal, Rock, POP, Classic, Jazz, etc.
PLAY/PAUSE BUTTON
SELECT TRACK #0-9

CONNECTIONS AND BUTTONS

SD CARD SLOT supports up to 64 GB
USB SLOT supports up to 64 GB
DISPLAY
MODE BUTTON / TWS BUTTON switch between audio sources Press and hold to enable TWS with a second HPA605BT
PREVIOUS BUTTON/ DECREASE VOLUME
NEXT BUTTON/ INCREASE VOLUME
REPEAT BUTTON repeat one, repeat all, random
PLAY/ PAUSE BUTTON
INPUT 1 VOLUME BUTTON Adjust the volume for MIC IN (13) or JACK IN (11)
INPUT 2 VOLUME BUTTON Adjust the volume for LINE IN (14) or RCA IN (12)
1/4″ JACK INPUT Mono input
RCA LINE INPUT Stereo input
MIC INPUT 1 XLR MIC input
MIC INPUT 2 XLR MIC input
ECHO Adjust the ECHO depth of the MIC input
MIC TREBLE Adjust the treble tone of the MIC inputs
AUX IN 3,5mm jack input
MIC BASS Adjust the bass tone of the MIC inputs
POWER AND CLIP LED
When the power is ON the green LED is lit When the clip LED lights up, overload occurs
MAIN VOLUME BUTTON Adjust the main volume
MIC PRIORITY When active, the incoming MIC signal reduces all other audio signals.
UHF MIC INPUT 1 VOLUME BUTTON Adjust the volume for HPA605MIC1 IN
RF.1 Remote frequency 1 LED indicator
RF.2 Remote frequency 2 LED indicator
DC 12 V INPUT External battery input. This is NOT for external speakers!
UHF MIC INPUT 2 VOLUME BUTTON Adjust the volume for HPA605MIC2 IN
UHF POWER LED INDICATOR Power is ON when lid
UHF POWER BUTTON ON / OFF wireless frequency
MAIN POWER BUTTON ON/ OFF
AC INPUT AC 110 – 230V, -50 / 60Hz
CHARGING LED INDICATOR Lit while charging

Precautions

Points to observe for safe usage Read this manual carefully before using this item and its components. They contain instructions on how to use this product in a safe and effective manner. Caliber Europe BV cannot be responsible for problems resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Caliber Europe BV dealer for repairing.
Product cleaning. Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature. Ensure that the ambient temperature is between 0°C and +45°C before turning on the device.
Maintenance. If you have problems, do not attempt to repair the device yourself. Return it to your Caliber Europe BV dealer for servicing.
Placement. Place the product on a flat surface. Provide enough space around the product for sufficient ventilation.
Heat. Do not locate the appliance in the vicinity of a heat surface or in direct sunlight.
Voltage. Check the main voltage indicated on the adapter/product rating label in accordance to the local electricity supply, if it doesn’t, return the product to the store where you bought it.
Plug. Remove the plug from the outlet, when the product is unused for a long period of time and during thunderstorms.
Accessories. Use only supplied accessories .
Replace battery. The built-in rechargeable battery is not replaceable. Do not remove or replace the battery, do not throw in the trash or in the fire. Use only supplied charging adapter.

Thank you for choosing our product. We hope you enjoy using the device. Below the description of the features of the HPA. The number between the “(. .. )” refers to the key or connection on the device. The illustration can be found in the first pages of this manual.

Warning: Make sure all volume knobs are set to minimum levels before powering ON speaker.

Power ON/OFF (30)

Volume Master Volume button on the back controls the main volume (21). The remote control adjustable max volume is limited by main volume and does not work if the main volume is set to minimum. When the ‘Clip LED’ (20) on the back of the device is lit; overload occurs. Set the main volume lower, to prevent damage to the speakers or other components.
Battery charging The device has a built-in rechargeable battery. Place the provided power cord, plug one end into the device and plug the other end (euro plug) into a wall socket. For the first time; charge the battery for 9 hours. While charging, the charging LED (19) is lit. The device will operate without the wired connection using the battery. Don’t charge the device longer than 24 hours.
Note: loud music and bass need more energy than e.g. spoken text.

Connecting an external battery

Proceed with caution, to prevent damage to the product or battery:

Always turn the device OFF, before connecting or disconnecting the power cables. When connecting the power cables, connect the positive (red) power cable first, then the negative (black) power cable, to avoid damage.
Make sure the polarity of the battery and the device side is correct. Positive pole (Red) of battery to the positive terminal(+) of the device. Negative pole (Black) of battery to the negative terminal(-) of the device.
If the battery is not used for a long period of time, remove the power cables to prevent damage.
Incorrectly installing or using an incompatible battery may increase the risk of fire or explosion.

Bluetooth connection

Use the [MODE] button (4) or use the remote control to select Bluetooth mode.
Set your Bluetooth device to ‘Search’ using the device’s Bluetooth menu.
Choose ‘HPA605BT-CALIBER’ from the list.
When the devices are paired successfully, a sound will be heard and you can start playing music on your device. If your device supports A2DP you can use the buttons on the HPA to control the playback.

Play music from USB:

Insert an SD-card into slot (1), the stored music will be played automatically.
You can use the playback controls on the HPA and remote.

Note: Under Bluetooth or AUX-in mode, if a USB I SD is inserted it will automatically start playing. To return to the previous mode, use the [MODE] button (4).

AUX-IN: For the optional wired connection, you can connect an external device e.g. MP3 player to the AUX-in (12) of the device using an RCA cable.

When an external device is connected, use the [MODE] button (4) to switch to AUX mode.
Start playing music on your external device.

Note: The playback control buttons on the HPA will not work in this mode.

Sing-Along

There are 2 wireless MIC inputs for HPA605MIC1 (included) & HPA605MIC2 (sold separately)
The volume can be controlled on the bottom rear (23 / 27)
There are 2 wired MIC inputs (13 / 14)
The volume can be controlled on the rear (9 / 10)
MIC PRI (22) button on the back lets you prioritize the MIC signal above other audio. Other inputs will be reduced in output volume while singing or speaking.