LG VK7407 Vacuum Cleaner Instruction Manual

LG VK7407 Vacuum Cleaner

Product Information

Specifications:

• Product Name: Vacuum Cleaner / ETC
• Model: V 3.2
• Date: 2024.1.19

Precautions:

• Removal of waste batteries and accumulators (Product with embedded battery ONLY)
• LG Electronics provides qualified professionals with detailed instructions on how to safely remove any batteries that are embedded in your product (as required by European Union Directive 2013/56/EU).
• In case the product contains a battery incorporated within the product which cannot be readily removed by end-users, LG recommends that only qualified professionals remove the battery, either for replacement or for recycling at the end of this product’s working life. To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice.
• Removal of the battery will involve dismantling of the product case, disconnection of the electrical cables/contacts, and careful extraction of the battery cell using specialized tools.

Product Usage Instructions

Vacuum Cleaner:

• VK7407
• VK8407, VK9407
• VH922**DSW

Washing Machine / Tumble dryer:

• Washing Machine

ETC:

• BP302
• BP405
• BP410
• Transparent Cooler
• ESS PCS
• 14HK701G
• ESS SEB (REA200AP0)
• ESS (BUEL011HBC1/BUEL015HBC1)
• ESS (D008KE1N211/D010KE1N211)
• ESS (RA600K11A00/ RA600K07A00)
• ESS (RA600K11A00/ RA600K07A00)

FAQ

• How should I remove the battery from the product?
  If the product contains an embedded battery that cannot be readily removed by end-users, it is recommended to contact qualified professionals for battery removal. They will dismantle the product case, disconnect the electrical cables/contacts, and carefully extract the battery cell using specialized tools.

• Can I remove the battery myself?
  No, to prevent damage to the product and ensure safety, users should not attempt to remove the battery themselves. It is advised to contact LG Service Helpline or other independent service providers for professional advice.

Precautions

Removal of waste batteries and accumulators
(Product with embedded battery ONLY)

• LG Electronics provides qualified professionals with detailed instructions on how to safely remove any batteries that are embedded in your product (as required by European Union Directive
  2013/56/EU).

• In case the product contains a battery incorporated within the product which cannot be readily removed by end-users, LG recommends that only qualified professionals remove the battery, either for replacement or for recycling at the end of this product’s working life.

• To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice.

• Removal of the battery will involve dismantling of the product case, disconnection of the electrical cables/contacts, and careful extraction of the battery cell using specialized tools.

Vacuum Cleaner

VK7407

General Information

Disassemble process

KK8407, VK9407

General Information

Disassemble process

VH92**DSW

General Information

Disassemble process

Washing Machine / Tumble Dryer

Washing Machine

Disassemble process

1. Remove the protective cover from the back of the door.
   (Insert a flat tool at the groove of the red circle, and then push and lift.)

2. Loosen 6 screws of the PCB cover

3. Pull the hook in the indicated area to remove the touch film and remove the PCB from the hook.

Lithium-ion batteries are soldered in the display PCB, so the display PCB needs to be replaced

ETC

BP302

1. Break outer casing
   Caution !! After breaking outer casing, it cannot be reassembled !!

2. Remove Cell

BP405

1. Break outer casing
   Caution !! After breaking outer casing, it cannot be reassembled !!

2. Remove Cell

BP410

1. Break outer casing
   Caution !! After breaking outer casing, it cannot be reassembled !!

2. Remove Cell

Transparent Cooler

ESS PCS

14HK701G

ESS SEB(REA200AP0)

1. Open front cover with Hex wrench 8mm
2. Disconnect Screw 4EA

3. Disconnect communication & Wifi cables
4. Disconnect M4 Screw 4EA

5. Disconnect PMS Cable
6. Pull Out PMS Assy’

7. PMS Base Bracket

8. Remove RTC Battery by Soldering Iron

ESS (BUEL011HBC1/BUEL015HBC1)

1. Press unit switch 1 only.
2. Disconnect Screw 5EA

3. Close Circuit Break (4P & 2P)
4. Disconnect ISO & Power Harness

5. Disconnect the 4th(3RD) to 1st Packs each with 4 nuts

Coin Battery Removal Guide – (D008KE1N211/D010KE1N211)

1. Open lower cover with “+” driver
2. Open upper cover with “-” driver

3. Coin battery removal in PMS Board

ESS (RA600K11A00/ RA600K07A00) / Battery

1. Press unit POWER switch only.

2. Disconnect screw 5EA

3. Close circuit break (4P)

4. Disconnect ISO & Power harness

5. Disconnect nut(6EA) & Battery

ESS (RA600K11A00/ RA600K07A00) / Coin Battery

1. Press unit POWER switch only.

2. Disconnect screw 5EA

3. Close circuit break (4P)

4. Disconnect nut 2EA & Support 4EA

5. Disconnect screw, support 4EA & Harness 4EA
6. Disconnect coin battery

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>