Caddx SZ07-K012S Polar Micro Digital FPV Vista Camera Kit User Guide
- June 6, 2024
- Caddx
Table of Contents
Digital Camera Series
Nebula nano cam, Nebula micro cam, Nebula pro cam,
Nebula pro nano cam ,Polar nano cam, Polar cam, Dji cam
User Guide
Introduction
Caddx digital series cameras support 720P video output. Compatible with Vista
and Air unit modules that can be mounted on racing drones and used with DPI
FPV goggles.
Remove the back cover screws.
Install coaxial cable.
- Back cover
- Screw
- Coaxial cable
Camera parameters
Model: Polar
Weight: 9g
Dimensions: 24 x 19 x 19mm
Image ratio: 16 : 9
Min.Latency: 720p 60fps < 32ms
Sensor: 1/1.8″ CMOS
Aperture: F/1.6
Shutter: Rolling shutter
Iso: 100-25600
FOV: 162°(D);138°(H);75°(V)
Model: Polar nano
Weight: 2.7g
Dimensions: 15.8 X14 X 14mm
Image ratio: 16 : 9
Min.Latency: 720p 60fps < 32ms
Sensor: 1/1.8″ CMOS
Aperture: F/1.8
Shutter: Rolling shutter
Iso: 100-25600
FOV: 162°(D);138°(H);75°(V)
Model: Nebula pro
Weight: 6 g
Dimensions: 20x 19x 19mm
Image ratio: 16:9/4:3
Min.Latency: 720p 120fps < 28ms 720p 60fps < 32ms
Sensor: 1/3.2″ CMOS
Shutter: Rolling shutter
Iso: 100-25600
FOV: 150° (D);122° (H) ;93° (V)
Model: DJI cam
Weight: 8.2 g
Dimensions: 27.4 X 21.1 X20.1mm
Image ratio: 16:9/4:3
Min.Latency: 720p 120fps < 28ms 720p 60fps < 32ms
Sensor: 1/3.2″ CMOS
Shutter: Rolling shutter
Iso: 100-25600
FOV: 150° (D);122° (H) ;93° (V)
Model: Nebula nano
Weight: 3.5 g
Dimensions: 21 x14 xl4mm
Image ratio: 16 : 9
Min.Latency: 720p 60fps < 32ms
Sensor: 1/3.2″ CMOS
Shutter: Rolling shutter
Iso: 100-25600
FOV: 138° (D);122° (H) ;75° (V)
Model: Nebula micro
Weight: 5.8 g
Dimensions: 20 x19 xl9mm
Image ratio: 16: 9
Min.Latency: 720p 60fps < 32ms
Sensor: 1/3.2″ CMOS
Shutter: Rolling shutter
Iso: 100-25600
FOV: 138° (D);122° (H) ;75° (V)
Model: Nebula pro nano
Weight 3.5g
Dimensions: 16.5X 16x 14mm
Image ratio: 16:9/4:3
Min.Latency: 720p 120fps < 28ms 720p 60fps < 32ms
Sensor: 1/3.2″ CMOS
Shutter: Rolling shutter
Iso: 100-25600
FOV: 150° (D);122° (H) ;93° (V)
Menu board
Polar camera supports menu board adjustment, this function needs self- soldering, please be CAREFUL not to damage the camera structure during welding.
-
Remove the screws of the back cover. Remove the nylon spacers.
-
Solder the menu wire and the gnd wire. Install the back cover. Connect the OSD menu board.
-
Left/Right button Control the increase or decrease of saturation.
-
Up/Down button Control the increase or decrease of brightness.
-
Middle button Short press to save, long press for 3 seconds to restore factory settings.
” Menu board needs to be purchased separately
Support
Contact: Support@caddxfpv.com
https://api.erweicaihong.cn/DMBG
Caddxfpv official website
This content is subject to change.
Download the latest version from https://www.caddxfpv.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>