tp-link TL-SG105S-M2 5-8-Port 2.5G Multi-Gigabit Desktop Switch Installation Guide
- June 13, 2024
- tp-link
Table of Contents
© 2023 TP-Link 7106510432 REV1.1.0
Installation Guide
5/8-Port 2.5G Multi-Gigabit Desktop Switch
Panel Explanation
Power
On: Power on
Off: Power off
Kensington Security Slot
Secure the lock (not provided) into the slot to prevent the device from being stolen.
Port LED
When one of the LED is on/flashing
On: Connecting to a device but no activity
Flashing: Transmitting or receiving data
Left LED (2.5G)
Green: Running at 2.5 Gbps
Flashing: Transmitting or receiving data
Right LED (1G/100M)
Green: Running at 1 Gpbs
Yellow: Running at 100 Mbps
Flashing: Transmitting or receiving data
Note:
For simplicity, we will take TL-SG105S-M2 for example in this Guide.
Connection
- Internet
- Power Adapter
- Ethernet Ports
- Router
- WAN Port
- LAN Port
- Devices
a. 2.5G NAS/Server
b. 2.5G Gaming Computer
c. 2.5G Wi-Fi 6 AP
d. Laptop
e. With a USB to 2.5G Ethernet adapter, you can enjoy the Ethernet up to 2.5 Gbps on your laptop.
Specifications
General Specifications
Standard| IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3bz, IEEE802.3x,
IEEE802.1p
---|---
Protocol| CSMA/CD
Network Media (Cable)| 100Base-TX: UTP category 5 cable or above (max. 100 m)
1000Base-T: UTP category 5e cable or above (max. 100 m)
2.5GBase-T: UTP category 5e cable or above (max. 100 m)
Interface| 5/8 100 Mbps/1 Gbps/2.5 Gbps Auto-Negotiation RJ45 Ports
Switching Capacity| TL-SG105S-M2: 25 Gbps
TL-SG108S-M2: 40 Gbps
Transfer Method | Store-and-Forward
MAC Address Learning | Automatically learning, automatically aging
Frame Forward Rate| 100Base-TX: 148810pps/Port
1000Base-T: 1488095pps/Port
2.5GBase-T: 3720238pps/Port
Wall mountable| Yes
Distance between mounting holes | TL-SG105S-M2: 52 mm
TL-SG108S-M2: 110 mm
Environmental and Physical Specifications
| Operating Temperature | 0˚C to 40˚C (32˚F to 104˚F) |
|---|---|
| Storage Temperature | -40˚C to 70˚C (-40˚F to 158˚F) |
| Operating Humidity | 10% to 90% RH non-condensing |
| Storage Humidity | 5% to 90% RH non-condensing |
Frequently Asked Questions (FAQ)
Q1. The Power LED is not lit.****
The Power LED should be lit when the power system is working normally. If the
Power LED is not lit, check as follows:
A1: Make sure the power adapter is connected to the switch with power
source properly.
A2: Make sure the voltage of the power supply meets the requirements of
the input voltage of the switch.
A3: Make sure the power source is ON.
Q2. The right and left LED are not lit when a device is connected to the corresponding port.****
It is recommended that you check the following items:
A1: Make sure that the cable connectors are firmly plugged into the
switch and the device.
A2: Make sure the connected device is turned on and works normally.
A3: The cable must be less than 100 meters long (328 feet).
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit
https://community.tp-link.com to join
TP-Link Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or
simply scan the QR code.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives (EU)2015/863, 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce.
UK declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp- link.com/support/ukca/
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Adapter shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.