SCANGRIP 03.5612 Slim Inspection Lamp Instruction Manual
- June 6, 2024
- SCANGRIP
Table of Contents
SLIM
**03.5612
Instruction Manual
**
3 years warranty*
PATENT PROTECTED
- go to scangrip.com to register
WARNING / CHARGING INSTRUCTION / BATTERY TIPS
-
Avoid looking directly into the beam of light, as this will result in dazzling
-
Do not use the lamp near a naked flame
-
Before using the lamp for the first time, the battery must be fully charged
-
The red charging indicator lights up during charging
-
The green charging indicator lights up when charging is completed
-
Recharge frequently
-
Always replace the battery with an original SCANGRIP battery
-
Do not leave the battery without charge for an extended period
– Deep discharge risks damaging the battery -
The light source of this lamp is not replaceable; when the light source reaches its end of life the whole lamp shall be replaced
-
Only charge the lamp indoors at min 0 °C
Discarded electrical products must not be disposed of together with household
waste.
Please use recycling facilities. Ask your local authority or retailer for
advice on recycling.
– The battery must be removed from the device before it is broken up
– The device must be disconnected from the mains when the battery is removed
– Please dispose of the battery safely
MANUFACTURER’S WARRANTY – Information for customers in Australia and New
Zealand only.
This SCANGRIP product is guaranteed for a period of 2 (two) years from the
date of purchase. This guarantee shall become invalid if the product has been
misused, tampered with or accidentally damaged.
If the product is defective, we undertake to repair or replace the product or
any part of it that is defective; or wholly or partly recompense you if they
are defective.
This guarantee is in addition to other rights and remedies available to
consumers, all of which are given by us to you if you are a consumer. Our
goods come with guarantees that cannot be excluded under the Australian or New
Zealand Consumer Law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
If you wish to make claim, please return this product to the original place of
purchase together with your purchase receipt or go to our website
www.scangrip.com and fill out the claim form.
DESIGNED BY SCANGRIP IN DENMARK
EU DESIGN PATENT NO. 5597010
V6/11.2021/CXQ
// SCANGRIP A/S Rytterhaven 9 DK-5700 DENMARK
Made in China
Documents / Resources
|
SCANGRIP 03.5612 Slim Inspection
Lamp
[pdf] Instruction Manual
03.5612, Slim Inspection Lamp
---|---