Gear4music G4M-LED-KIT LED RING LIGHT STAND AND PHONE HOLDER User Manual

June 5, 2024
Gear4music

Gear4music G4M-LED-KIT LED RING LIGHT STAND AND PHONE

HOLDER

WARNING!

Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product No naked flame sources, such as lighted candles, should be placed on the product Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventilation must not be impeded by covering the appliance with items such as newspapers, tablecloths, curtains etc.

INTRODUCTION

Thank you for purchasing the LED Ring Light with 150cm Stand and Phone Holder. To get the most out of your product, please read this manual carefully.

BOX CONTENTS

  •  1 x LED ring light
  •  1 x 150cm stand
  •  1 x Phone holder
  •  1 x User manual

FEATURES

  •  LED ring light perfect for vlogging, selfies, content creation and more.
  •  Find the perfect setting for any event with 10 brightness levels for each mode.
  •  Use remotely thanks to USB power cable.
  •  Comes complete with stand and phone holder.

FUNCTIONS

  1. BRIGHTNESS +
    Press this button to increase the brightness.

  2. LIGHT MODE SWITCH
    Press this button to alternate between modes.

  3. BRIGHTNESS –
    Press this button to decrease the brightness.

  4. ON/OFF
    Press this button to turn the ring light on/off. Please note, the in-line remote control features a blue indicator which is illuminated when the ring is off.

SET-UP

  1.  Install the ¼” scew of the light ring onto the ball joint mount.
  2.  Attach the ball joint mount to the tripod stand. Gear4music-G4M-LED-KIT-LED-RING-LIGHT-STAND-AND-PHONE-HOLDER-FIG-3
  3.  To power the light ring connect the supplied USB cable to a suitable 5V USB power supply, such as laptop, power bank or USB power plug. 
  4.  To begin using the light ring press the on/off button. You can use the light mode switch to choose from one of three modes and adjust the brightness to taste. 

SPECIFICATIONS

If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals