sOmfy 1811081 Telis 16 Channel RTS Pure Hand Held Remote User Guide

: June 6, 2024
: somfy

Table of Contents

Introduction
Programming Guide
Programming Guide Continued
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Part Number: 1811081

Telis 16 RTS
The Telis 16 RTS remote control allows you to control up to 16 individual or groups of window coverings using Radio Technology Somfy® (RTS). The Telis 16 channel remote features an LCD screen that numerically displays which channel is selected.

Introduction

sOmfy 1811081 Telis 16 Channel RTS Pure Hand Held Remote -
Telis

sOmfy 1811081 Telis 16 Channel RTS Pure Hand Held Remote -
Back

Programming Guide

While the Telis 16 remote is capable of programming the operation of Somfy motors, it’s recommended that you pre-program the motors for actions such as “my” preset operations using a Telis 1 or similar remote control (please refer to the Somfy motor programming guide for the pre-program steps).

Note: After 2 minutes of inactivity, the Telis 16 RTS automatically goes into SLEEP MODE. Press any button to reactivate it.

Naming a Channel

Select the channel you want to program using the arrow buttons ( < ) or ( > ).
Press and hold the selection button ( ) until SET appears on the screen. Set mode is activated. The ﬂashing icon (shades/shutter, rolling shutters/skylight shades, and awning) are displayed. Use arrow buttons ( < ) and ( > ) to scroll through the choices.
Brieﬂy press the selection button ( ) to save the icon displayed and move to the ﬁrst character.
Select the location of the character to be edited using the navigation buttons ( < ) or ( > ). The ﬂashing hyphen corresponds to the character to be edited.
Brieﬂy press the selection button ( ) to edit the character in this location.
The character ﬂashes to select another character, press the arrow buttons ( < ) or ( > ).
Brieﬂy press the selection button to save the character displayed and move to the next character.
Repeat steps 4 to 7 for each of the characters in the channel’s name.
Press and hold the selection button until set disappears from the screen. Set mode is deactivated, and the remote returns to manual mode.

Note: The characters (7 letters + 1 number) can be alphabetic (A to Z) or numeric (0 to 9)

Programming Guide Continued

Naming Other Channels: Repeat steps 1 to 9 for each channel you want to customize.

Adding or Deleting Remote/Channel
The procedure for assigning window coverings to the channels of the Telis 16 RTS and deleting them is identical.

Press and hold the programming button on the pre-programmed RTS transmitter until the window coverings moves or jogs. Programming mode is activated for two minutes.
Use the arrow buttons ( < ) or ( > ) to select the channel on the Telis 16 RTS for programming.
Brieﬂy press the programming button on the Telis 16 RTS. The window covering moves or jogs up and down, and it is assigned to or deleted from the chosen channel on the remote. In order to assign or delete the window covering from other channels, repeat steps 1 to 3, selecting another channel.

Note : Visit https://store.somfysystems.com/ to purchase an additional or replacement product.

This device is FCC certiﬁed and complies with part 15 of the FCC rules.
RTS compatibility: RTS transmitters are capable of operating any RTS motor.

sOmfy 1811081 Telis 16 Channel RTS Pure Hand Held Remote -
BATTERY BATTERY RECYCLING OR DISPOSAL
Discard batteries and electrical components following local codes or regulations. Recycle batteries and electrical components with designated electronic recycle centers.