ELRO CBFS58R 433MHz Smoke Alarm Device Instruction Manual
- June 6, 2024
- ELRO
Table of Contents
ELRO CBFS58R 433MHz Smoke Alarm Device Instruction Manual
INTENDED USE: FIRE SAFETY
ESSENTIAL CHARACTERISTICS: PASSED
Nominal Avion condones / Sensivity, Response delay (response me)
and Performance under fire condign – Personal reliability
– Tolerance to supply voltage – Durability of personal reliability and
response delay, temperature resistance, vibrant resistance, humidity
resistance, corrosion resistance, electrical stability.
Manufacturer
Site well Electronics CO., Limited
No.666 Qingfeng Road, Jiangbei District,
Ningbo, Zhejiang Province, China 315034
Importer:
ELRO Europe | www.elro.eu
Postbus 9607 – Box E800
1006 GC Amsterdam The Netherlands
Symbols: Recycling and disposal: The WEEE symbol (a) means that this product
and batteries must be disposed separately from other household waste. When it
reaches its end of life, take it to a designated waste collection point in
your area to guarantee a safe disposal or recycling. Protect the environment,
human health and natural resources! Read the manual (b) before use and store
it in a safe place for future use and maintenance. Download (c) Declaration of
Performance (DoP). Hereby, ELRO Europe declares that the radio equipment type
CBFS58R is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.elro.eu/compliance
Warnings: To prevent injury, this apparatus must be securely attached to
the ceiling in accordance with the installation instructions. Batteries shall
not be exposed to excessive heat such as sunshine and fire. Battery lifetime
shortens without monthly test. Keep away from air conditioning/ventilation. Do
not paint or cover alarm. Consult local regulations. Troubleshooting: False
alarm is often caused by dust or steam. In case of doubt: Leave the building
and take action! Additional mounting instructions: Corridor max width 3m: Max
15m between 2 alarms. Max. 7,5m to front side and alarms at edges/crossings of
corridors. Galleries: Length and width >2m and >16m², additional alarms below
gallery. Partial roof slopes: Flat ceiling 1m wide, consider as roof slope.
Flat ceiling >1m wide, consider as flat ceiling.
Max. transmission power: 10dBm
- Content
-
Activate / Replace
-
Testing
-
Connect/Learning
- Rooms
Roof
Beams
-
Test & clean
-
Hush
Clear code
Low baery alert? Replace baery and test! (see 2 and 3). Mute warning for 8 hours: press test button.