HARBOR FREIGHT 57880 Central Machinery 20-Inch High Velocity Floor Fan Owner’s Manual
- June 6, 2024
- HARBOR FREIGHT
Table of Contents
HARBOR FREIGHT 57880 Central Machinery 20-Inch High-Velocity Floor Fan
Owner’s Manual
Visit our website at: http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance, and cleaning procedures. Write
the product’s serial number in the back of the manual near the assembly
diagram (or month and year of purchase if the product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please call
1-888-866-5797 as soon as possible.
©Copyright 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
WARNING
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
READ AND SAVE THESE INSTRUCTIONS.
RULES FOR SAFE OPERATION
-
WARNING! To reduce the risk of fire or electric shock, do not use this Fan with any solid-state speed control device.
-
Do not leave Fan running while unattended.
-
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
-
Do not run cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
-
Never insert fingers, pencils, or any other object through Front or Rear Blade Guards.
-
Disconnect Fan when moving it from one location to another.
-
Disconnect Fan before removing grills for cleaning.
-
Be sure the fan is on a stable surface when operating to avoid overturning.
-
DO NOT use a fan in the window.
Rain may create an electrical hazard. -
Complete the assembly of the fan before switching on the fan.
-
Maintain labels and nameplates on the fan.
If unreadable or missing, contact Harbor Freight Tools for a replacement. -
Use only in dry areas.
Do not use in bathrooms, laundry area, near sinks or other sources of water. -
This fan is not a toy.
Keep it out of reach of children. -
People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to the heart pacemakers could cause pacemaker interference or pacemaker failure.
-
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this fan, but must be supplied by the operator.
WARNING SYMBOLS AND DEFINITIONS
****| This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to
avoid possible injury or death.
| Indicates a hazardous situation that, if not avoided, will result in death
or serious injury.
| Indicates a hazardous situation that, if not avoided, could result in death
or serious injury.
| Indicates a hazardous situation that, if not avoided, could result in minor
or moderate injury.
| Addresses practices not related to personal injury.
Specifications
| Electrical Rating | 120VAC / 60Hz / 1.38A |
|---|---|
| Speed | Low 1017 RPM / Medium 1156 RPM / High 1330 RPM |
HOUSEHOLD USE ONLY
Assembly and Operation
****Read the ENTIRE RULES FOR SAFE OPERATION section at the beginning of this manual including all text under subheadings therein before set up or use of this fan.
-
Insert the fan onto the bracket until the buttons snap into place.
-
Plug fan into 120VAC, 60Hz outlet.
-
Turn the fan on by rotating the switch on the back: O is Off, 1 is Low, 2 is Medium, and 3 is High.
-
The fan may be tilted as desired.
-
To prevent accidents, turn off the fan and unplug it after use. Clean, then store the fan indoors out of children’s reach.
User Servicing Instructions
Procedures are not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK:
Turn the Power Switch of the fan off, unplug the fan from its electrical
outlet, and allow the fan to cool completely before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM FAN FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the
problem corrected before further use.
-
BEFORE EACH USE, inspect the general condition of the fan. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may affect its safe operation. -
Clean regularly to prevent dust from accumulating on Blade. Use damp cloth during cleaning and dry before use.
-
WARNING! TO PREVENT SERIOUS INJURY: If the supply cord of this fan is damaged, it must be replaced only by a qualified service technician.
Record Serial Number Here:___
Note: If the fan has no serial number, record the month and year of
purchase instead.
Note: Replacement parts are not available for this item. Reference UPC
193175424686.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear, and tear, or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our
product. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the
above limitation or exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise. If our inspection verifies
the defect, we will either repair or replace the product at our election or we
may elect to refund the purchase price if we cannot readily and quickly
provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost
of returning the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>