Bebe Stars 723 Bed Rail User Manual

: August 15, 2024
: Bebe Stars

Table of Contents

723 Bed Rail
SAFETY WARNINGS
PARTS LIST
ASSEMBLY INSTRUCTIONS
HEIGHT ADJUSTMENT & ROTATION
USER INSTRUCTIONS
CARE & MAINTENANCE
CUSTOMER SERVICE
Documents / Resources

user’s manual

723 Bed Rail

BED RAIL
140cm
item: 723

| AGE RANGE
12+ months
---|---
| STANDARDS
EN 716
BS7972

DO NOT USE THIS PRODUCT BEFORE YOU READ AND UNDERSTAND THESE INSTRUCTIONS
NOTE
The distance between the rail’s edges and the maress’ edges, must be at least 250mm.

SAFETY WARNINGS

IMPORTANT: RETAIN FOR FUTURE REFERENCE – READ CAREFULLY – YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS CAREFULLY.
WARNING: TO AVOID DANGER OF SUFFOCATION REMOVE PLASTIC COVER BEFORE USING THIS ARTICLE. THIS COVER SHALL BE DESTROYED OR KEPT AWAY FROM BABIES AND CHILDREN.
WARNING: The bed rail is intended for use for children between 12 months and 5 years of age, who are able to climb on and off the bed without their parents’ help.
WARNING: The bed rail must not be used to replace the cot, since it does not guarantee the same safety standards.
WARNING: The fixing, fitting and adjustment operations of the bed rail must only be carried out by an adult.
WARNING: The bed rail can be fitted on metallic mesh or slats, make sure that the distances between the elements (metallic mesh or slats) are smaller than the size of the base of the bed rail. Ensure that the people using the bed rail know how to use it safely.
WARNING: Before assembly, check that the product and all its components have not been damaged during transportation. Should any part be damaged, do not use and keep out of reach of children.
WARNING: The bracings must never be removed from the plastic supports and left within the reach of newborn babies and children.
WARNING: Do not use accessories, spare parts, or any component not supplied or approved by the manufacturer, as they may make the bed rail unsafe.
WARNING: To prevent the risk of stangulation it is essential to ensure that when the bed rail is fitted into position, there is a gap of at least 250 mm (10 in.) between each end of the bed and the corresponding end of the bedguard.
WARNING: Do not use the safety bed rail unless all the components are correctly fitted and adjusted.
WARNING: Never use without the bracings are firmly fixed to the bed
WARNING: Ensure that during use, the bed rail mesh is in contact with the mattress side surface.
WARNING: The bed rail must not be used with beds in which the top surface of the mattress is higher than 60 cm above the floor.
WARNING: Do not use the bed rail with mattresses thicker than 20 cm.
WARNING: The bed rail must not be used by adults, bedridden people or the elderly, or in a non-domestic environment.
WARNING: do not use the bed rail if any part is broken, torn or missing
WARNING: Don’t let other children play unattended close to the bed rail or climb on it.
WARNING: To prevent the risk of burns or fire, never place the bed rail near electrical appliances, gas cooker or other sources of intense heat. Keep the bed rail away from electrical cables.
WARNING: Do not place the bed rail near windows or walls, where strings, curtains or other objects may be used by the child to climb out of the bed, and to prevent the risk of suffocation and/or chocking.
WARNING: Do not leave the bed rail under the sun for a long time: prolonged exposure to direct sunlight may cause the materials or fabric cover to fade.
WARNING: When folded, store away from children.
WARNING: The bed rail must not be installed on an extra mattress, outdoor, cot.
WARNING: Do not use the bed rail on the top section of the structure when used as bunk beds.
WARNING: Use of the bed rail is not recommended with low density mattresses.
WARNING: The bed rail must not be used on beds with side panels.
WARNING: The use of the 140cm bed rail is allowed with mattresses: Length 190- 250cm / Width minimum 90cm / Height maximum 20cm. Do not use the bed rail with mattresses thicker than 20cm.

WARNING !!!
Never leave your child unattended!

PARTS LIST

A. Folding mechanism
B. Top tube
C. Boom tube
D. Bracing tube
E. Fabric cover

ASSEMBLY INSTRUCTIONS

HEIGHT ADJUSTMENT & ROTATION

USER INSTRUCTIONS

Assembly instructions
1.1. Assemble top tubes (part B) as figure 1.
1.2. Make connected top tube through fabric cover (part E) as figure 2.
1.3. Connect top tube with folding mechanism (Part A) as figure3.
1.4. Assemble bottom tubes (Part C) as figure 4.
1.5. Assemble folding mechanism with bracing tube (Part D) as figure 5.
1.6. Make connected bottom tube through fabric cover and connect tube with folding mechanism as figure 6.
Height adjustment and Rotation
2.1. Push this bottom and adjust the height of the bed rail as figure 7.
2.2. Pull this button and rotate bed rail as figure 8.

CARE & MAINTENANCE

The cleaning and maintenance of the bed rail must only be carried out by an adult.
Cleaning
– Clean the fabric parts with a soft cloth soaked in water or a neutral detergent.
– Clean the plastic parts with a soft cloth soaked in water.
– If the bed rail comes into contact with water, dry the metal parts to prevent the formation of rust.
– Never use abrasive detergents or solvents.
Maintenance
– Periodically check that the bed rail components are not worn, broken or damaged; in such an event, do not use the bed guard before having repaired or substituted the worn or damaged part.
– Keep the bed guard in a dry place.