uscce UE268 Bluetooth Speaker Alarm Clock User Manual

uscce UE268 Bluetooth Speaker Alarm Clock

Product Overview

FRONT VIEW

BACK VIEW

TOP VIEW

BOT TOM VIEW

GETTING STARTED

Plug the adapter into a standard household outlet, you will see 12:00 AM on the display and the clock is ready to be set. Insert 2 “AAA” batteries(Not Included) to preserve the ALARM/ TIME/ FM RADIO/ NIGHT LIGHT settings in case of power interruption.

NOTICE:

1. If the display is “blank” after plugging in, please check whether the DISPLAY DIMMER on the back is at the HIGH Position.
2. Under the battery power, the display will go blank and preset alarm will not go off.

BLUETOOTH CONNECTION SETTING

NOTICE:

1. The Bluetooth will automatically turn off if fails to connect to the phone within 2 minutes.
2. If a call comes in, the Bluetooth will stop playing the music.
3. When the clock is connected to the phone via Bluetooth, it will auto-sync the phone time to the alarm cock. It may fail to auto-sync the time due to incompatible situations on different phone version.
4. Place your clock and phone no more than 10 meters (33ft) away from each other.

MANU AL TIME SETTING

1. Press TIME SET to enter time setting, the HOUR and MINUTE digits will flash on the display. Press “ ” to advance to the correct hour, and press “ ” to advance to the correct minute (hold for rapid setting).
2. Press TIME SET to confirm and ext the Time Setting mode.
   NOTICE: The clock will exit automatically from the Time Setting mode if no action is taken within 15 seconds.(Action refers to pressing the desired button for setup)

SWITCH TIME FORMAT (12/24HR)

Press “O ” to toggle between 12 and 24 hour mode (the default is 12-hour time format).
NOTICE: When using the 12-hour time format, the AM icon will be appeared for 12:00 midnight through 11:59am, and the PM icon will be appeared for 12:00 noon through 11:59pm.

ALARM SETTING

1. Press ALARM SET to enter alarm setting, the HOUR and MINUTE digits will flash on the display. Press “ button” to advance to the correct hour, and press “ button” to advance to the correct minute (hold for rapid setting).
2. Press ALARM SET to confirm and enter WAKE UP SOUND setting. The alarm sound options will flash, and the alarm sound will ring. Press “backward” or “ forward” to choose one of five built-in alarm sounds(01=Birds Chirping; 02=Beep; 03=Siren; 04=Buzzer; 05=Soft Music) or FM radio which is the last tuned in radio station or the station you set in WAKE UP RADIO ALARM SETTING (Page 12) as wake up sound.
3. Press ALARM SET to confirm and enter ALARM VOLUME setting. Press “baksward ” or “forward ” to adjust the alarm volume, 01-15 level adjustable. The default alarm volume is 08 level.
4. Press ALARM SET to confirm and exit the Alarm Setting mode.
   NOTICE: The clock will exit automatically from the Alarm Setting mode if no action is taken within 15 seconds.(Action refers to pressing the desired button for setup)

SNOOZE/ TURN OFF ALARM DAILY

1. When the alarm goes off, press SNOOZE to snooze for a while, the alarm will go off again 9 minutes later.
2. To cancel the snooze at any time or to TURN OFF this day alarm while it is sounding, press “ON/OFF”  The alarm will go off again at the same time the next day.
3. If not stop the alarm, 5 built in alarm(Birds Chirping/Beep/Siren/Buzzer/Soft Music) will last 15mins before going silent. However, the Radio alarm, are customized. That means when alarm goes off and don’t stop it, it’ll ring 1 hour before going silent.

NIGHT LIGHT SETTING

1. In normal time display mode, press LIGHT to turn on the night light.
2. Press LIGHT repeatedly to choose among 8 different night light color options. 8 colors change as shown in the following sequence: red, orange, yellow, green, indigo, blue, purple, loop color, off.
3. Press “ ” repeatedly to adjust the night light brightness when it lights up, 4 level brightness adjustable.
4. Press and hold LIGHT for 3 seconds (release it) to turn it off.
   NOTICE : The night light will default to the last color you choose when you reopen it.

FM RADIO SETTING

Please extend the FM antenna on the back of the clock.

1. Press “FOLDER ” every time, FM radio will be ON/OFF.
2. Press and hold “ FOLDER” for 2s when radio is on, FM radio will scan and auto-store the scanned stations. Once the station search is completed, the first station will be played automatically. Press “backward ” or “forward ” to tune from auto-store stations.
3. Slide the FM/BT VOLUME knob at the right side of back of the clock to adjust FM volume a range of 01-15 level. The default volume is 15 level(max).

WAKE UP RADIO ALARM SETTING

When radio is on, press “bacward ” or “forward ” to tune radio stations you like, then press and hold ALARM SET button until icon “AL” flashes once on the display screen. The clock immediately saves this station as Wake Up Radio Alarm Sound.

SLEEP TIMER SETTING

Sleep timer lets you fall asleep while listening to FM radio for the set sleep duration then turns the radio off.

1. When radio is on, press repeatedly  to select the sleep timer ranging from OFF, 30, 60, 90, 120 minutes. The sleep timer will be seen on the display.
2. When the sleep timer is set, please wait for 3 seconds to exit from the setup. The “SLEEP” indicator will be seen on the display.
3. To turn off the sleep timer, press button repeatedly to select “OFF” and wait for 3 seconds for it to work.
4. When sleep timer is on, press button to see the sleep timer remained.

BRIGHTNESS CONTROL
There are 0-100% brightness levels for LED Display. Slide the DISPLAY DIMMER knob at the left side of back of the clock to adjust the display brightness (HIGH: 100%, LOW: 0%).

WIRELESS CHARGING

1. For maximum charging efficiency, please place your smartphone centrally on top of the clock as shown.
2. The battery power of your device is shown via your devices display.
3. When the phone is being charged wirelessly, the “thunder ” indicator will appear on the display.

NOTICE:

1. Phones that are capable of wireless charging may need to be placed slightly off centre. The built-in wireless receiver may not be centred inside the phone. This varies by brand/model.
2. There may be interference to the radio reception if using wireless charging at the same time.
3. Compatible with wireless charging enabled devices: iPhone 15/15 Plus/15 Pro/15 Pro Max/14/ 4 Plus/14 Pro/14 Pro Max/14 mini/13/13 Pro/13 Pro Max/13 mini/12/12 Pro/12 Pro Max/12 mini/11/ 11 Pro/11 Pro Max/XS Max/XS/XR/X/8/8 Plus; Samsung Galaxy Note 9/ Note8/S8/S8 Plus/S7/S7 Edge/S6 Edge Plus/S9/S10/S10 Plus/S10E/S20/S21/S22/S23; Google Pixel 7/7Pro/6/5/4/4XL/3/3XL, Nexus 4/5/6/7; LG V50/V40/V35/V30; LG G8/G7/G6; AirPods 3, AirPods Pro, AirPods 2, Galaxy Buds, Galaxy Buds+, Pixel Buds. And other devices with wireless charging function.
4. The charging time varies depending on the charging capacity of the battery and its current residual capacity, but wireless charging is generally slower than wired charging.
5. The components may heat up during the charging process. They will slowly cool down again after the charging process.
6. If charging does not start or slow charging, check the following:
   • Remove your smartphone from its case if the thickness of the case exceeds 0.12″ (3mm) or if it contains any metal, magnet, pop sockets, grips, stands, or credit cards.
   • Check if your smartphone is placed on top of the clock correctly as shown.
   • If your problem has not been solved by following the above steps, please reach out to us via

Email:support@uscceshop.com.

To expedite your case, please have the following information at hand: your phone’s model, and the type of phone case you are using (with a link if possible). Optionally, you may include a video to illustrate the problem you are having.

USB CHARGING PORT

1. Connect an external device via a USB cable to the USB charging port on back of the clock to charge the device.
2. The battery power of your device is shown via your devices display.

NOTICE:

1. There may be some radio interference while charging.
2. Please charge your device using only one charging method at any one time.
3. Please do not charge the same device using the wireless charging function and USB charging port at the same time.

SPECIFICATIONS

• Power Input: DC, 9V/2.5A
• Power: AC, 100-240V (50/60Hz)
• USB Output: 5V/1A
• Speaker Output: 2×5 Watt RMS

TROUBLESHOOTING

1. Is there a way to manually tune the radio? I can not get above 98.3 with the 30 auto-store channels. The stations I listen to are in the hundreds.
   Yes, it has two modes: Automatic and Manual. You can save your wanted radio stations via the Manual mode, but Please Note: it only can be saved one stations once in Manual mode.
   Here is the operation guide for Manual mode:

   • Unplug and remove the battery to reset, set again after power cycle;
   • Press “ ” to enter the FM Mode;
   • Press “ ” or “ ” to manually tune your desired stations. Please extend the FM wire antenna and vary the directions to get the best FM receptions.

2. How Do I Fix Bluetooth Connection Issues?

   • Confirm it’s not paired with other devices.
   • Forget all Bluetooth pairing records on your device.
   • Unplug and remove the battery to reset, set again after power cycle.
   • Disable and enable Bluetooth on your device.
   • Try to connect the speaker to another device.

3. Alarm doesn’t go off at the set time?

   • Check if the alarm is set to AM or PM time;
   • Check if the alarm is turn on (alarm icon display on the screen)

4. Display doesn’t light up?

   • Check if the power connection is loosed or not;
   • Change another working outlet to try again;
   • Slide the DISPLAY DIMMER knob to HIGH position in case the display is too dark to see.

5. How to turn off alarm daily?
   When the alarm goes off, pressing the “ON/OFF” will turn the alarm off until the next scheduled time.

6. How to turn off the alarm completely?
   In the normal time display, you can turn the alarm off completely by single pressing the “ON/OFF ”. The alarm icon will be disappear when the alarm is disabled.

WARRANTY & SUPPORT

• We offer a 45 day money-back guarantee and 18-month free replacement.
• USCCE customer support is committed to providing you with best-in-class service.
  For assistance, please keep the model number and order ID number of this product, then contact us by sending email, email address as below: support@uscceshop.com

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.
   Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>