Ningbo Diya Electric Appliance DR-2010 Wireless Charging Function User Manual
- June 6, 2024
- Ningbo Diya Electric Appliance
Table of Contents
Ningbo Diya Electric Appliance DR-2010 Wireless Charging Function
Product parameter
| USB Output | DC5V/2.4A（total） | Each USB Output is 2.1A |
|---|
Wireless charging
Output Power
| ****
Qi-EPP
| ****
10W Max
Rate Input Voltage/Power| AC125V/60Hz| 1875W
Protect function| Over temperature protection, FOD foreign object detection
Description of wireless charging function
Put the mobile phone with wireless charging function (such as iPhone11 /12/13, Samsung Note8/S9+, Huawei mate30Pro, etc.) to the center of wireless charging and the charging will start automatically. When the wireless charger is in normal working condition, the LED green light blink slow.
Precautions
- RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors. Do not expose this product to rain, wet or damp conditions. Water entering this product will increase the risk of electrical shock.
- No user serviceable parts inside; do not unscrew.
- This product must be properly secured into an outlet
- Caution: This shelf (or compartment) is intended for use with a product weighing not more than 500 grams and having dimensions that will permit it to sit evenly on this shelf. Use with other products may result in instability causing possible injury”
Operating instructions
- Plug your wireless charge current tap device into a standard 125 V AC grounded outlet
- Plug properly grounded power pin in the provided receptacle.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or mormore of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>