Lenco SB-040 85cm Soundbar with 40W RMS User Manual

Lenco SB-040 85cm Soundbar with 40W RMS

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1.  Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2.  Install in accordance with the supplied user manual.

3.  Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5.  Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the  same reason, do not spill water or liquid on the product.

7.  Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8.  The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10.  Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12.  Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14.  The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15.  Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16.  If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19.  This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23.  Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26.  Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:
    If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    Unplug this device during lightning storms or when unused for a long period.
    The socket outlet must be installed near the equipment and must be easily accessible.
    Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    Devices with class 2 construction do not require a earthed connection.
    Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28.  If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just
    2 hours and can lead to death.
    Keep new and used batteries away from children.
    If the battery compartment does not close securely, stop using the product and keep it away from children.
    If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:
    Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

•  Unpack all parts and remove protective material.
•  Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Warning about use of HDMI cable connection.

•  Use only a HIGH SPEED HDMI cable (from HDMI 1.4)
•  Check if your TV has a HDMI connector with “ARC” mentioned.

If yes, please connect the HDMI cable with this connector. If not, then it is not sure that the sound synchronization of volume of your soundbar will work perfectly.
In the HDMI settings of your TV, please select the CEC-HDMI option (or ANYNET for some brands)

Overview

Product

1. POWER BUTTON /SOURCE: Short press to power on when off, after power on short press for function change, long press to standby;
2. VOL+: Short or long press for volume up;
3. VOL-: Short or long press for volume down;
4. PAIR: Short or long press Bluetooth pair;
5. LINE IN;
6. AUX IN (L/R);
7. DC IN;
8. HDMI IN;

Function indicator LED

1. Red light: When the power supply indicates standby, it is long bright, and extinguishes after the power is turned on;
2. Orange LED light; LINE IN function used
3. White LED light; HDMI function is used
4. Green LED light: AUX in mode;
5. Blue light: Bluetooth function used (Blue light flash when Bluetooth is not connected; Blue LED long bright after Bluetooth connection);

Remote

1. POWER BUTTON Short press to on or standby;
2. BLUETOOTH BUTTON Short press to Bluetooth mode; long press to Bluetooth pair;
3.  LINE IN: Press to LINE IN mode;
4. MUSIC: Press to Music sound effect
5. MOVIE: Press to cinema sound effect; In Movie mode, Bass and Treble adjustments are not working;
6.  TREBLE+: Press to treble effect up
7.  TREBLE–: Press to treble effect down
8. Press to jump previous song in Bluetooth mode, and Short press to mute off when mute on;
9. Press to play or pause music in Bluetooth mode, and Short press to mute off when mute on;
10. MUTE: Press to mute on or off
11. AUX IN: Press to AUX IN mode;
12. HDMI: Press to HDMI mode;
13.  DIALOG: Press to speech sound effect;
14.  BASS+: Press to bass effect up, and Short press to mute off when mute on;
15. VOL+: Short or long press to volume up and Short press to mute off when mute on;
16.  VOL-: Short or long press to volume down, and Short press to mute off when mute on;
17.  BASS–: Press to bass effect down, and Short press to mute off when mute on;
18. Press to jump next song in Bluetooth mode, and Short press to mute off when mute on;

Operation

Install the Remote Control:
The Remote Control has a pre-installed lithium CR2025 battery. Remove the protective tab to activate the Remote

Control battery.
Note: The Remote Control works within a range of 6 meter.

Remote Batteries

Remote control: requires 1 CR2025 button cell type battery (included).

Get Started

1.  Make sure you have made all the necessary cable connections before connecting the Soundbar to a wall outlet, the soundbar will enter to standby mode, the
   indicator will light up in red.

2. Short press /SOURCE on unit or on remote control to turn on the soundbar. The indicator of the last used mode will light up.

3. Press the source button on unit or Remote Control to choose various source. The color of the indicator light will change as per selection.
   Note: The Soundbar will re-enter the Standby Mode again if there is no operation for 15 minutes.

Bluetooth Pairing:

1. Press the Bluetooth button on the Remote control to enter the Bluetooth mode. You can also short press the Source button on the Soundbar to choose the Bluetooth Source.

2.  The indicator light will flash in blue.

3. Turn on the Bluetooth function on your devices and the device will start to search for the Soundbar.

4.  Select “Lenco SB-040” from the list of found devices.

5. If asked, enter the password “0000” and press OK.

6. When successfully paired with your device, the indicator light will be lit steadily.
   Note: The Bluetooth playback is controlled by your device and the buttons on the remote control.
   Note: The operation range for the Bluetooth connection is 10 meters.
   Note: If a mobile phone on which you are playing music receives a call, the music will be interrupted and not played. After call end, the devices are connected to each other again and playback continues.

7. Press and hold the Bluetooth button on the Remote Control for 3 seconds to disconnect the Bluetooth
   pairing.

AUX Source:

1. Ensure that the soundbar is connected to the TV or other audio device via an AUX cable.
2.  Press the AUX button on the Remote control to enter the mode. You can also short press the source button on the soundbar to choose the AUX source.
3. The indicator light will lit in green.
   Note: The playback is controlled by your device and by the button on the remote control.

LINE IN Source:

1. Ensure that the soundbar is connected to the TV or other audio device via an audio cable.
2. Press the LINE IN button on the remote control to enter the mode. You can also short press the source button on the soundbar to choose the LINE IN source.
3. The indicator light will lit in orange.
   Note: The playback is controlled by your device and by the buttons on the remote control

HDMI Source

1.  Ensure that the soundbar is connected to the TV or other audio device via HDMI cables.
2. Press the HDMI button on the remote.
3.  The indicator light will lit in white.
   Note: The device can synchronize the volume with the TV, and also with the switch.

Troubleshooting

Pairing

| Other mobile device has connected before
use and the mobile device has not left as
well as its Bluetooth is not off. When it
connection via| connects, Bluetooth of this device will
Bluetooth| automatically find the Bluetooth device
cannot be| and connect. First, turn off Bluetooth of the
completed| connected Bluetooth devices, then the next
Bluetooth device can be found and
normally paired to connect.
Volume of| After connections with mobile devices,
volume of Bluetooth device is not up but at
playback via| the default output level. Turn on the
Bluetooth is| mobile device output.
small| Output volume of Bluetooth device is low
itself.
Connection distance via Bluetooth is short| Obstruction exists between mobile devices and Bluetooth device. Remove obstructions.
Connection via| Obstruction exists between mobile devices
and Bluetooth device. Remove
Bluetooth| obstructions.
right,| Too far away from Bluetooth device to
sometimes| connected mobile devices, beyond the
connection range.
| Shorten the distance between the Bluetooth device and mobile devices.
---|---
Silent play after connection via Bluetooth| After connections with mobile devices, Bluetooth device audio is off. Turn on the mobile’s output volume.

Specifications

User manual
Dimensions| 8506060mm
Weight| 1.75KG

• Power supply adaptor (For EU only)
• Manufacturer: Jiedong Electron Factory
• Model number: JDA0301402000DM2

Use only the power supply listed in the user instructions

Electron Factory
Model Identifier| JDA0301402000DM2
Input voltage| 100-240V
Input AC frequency| 50/60Hz
Output voltage| 14V
---|---
Output current| 2A
Output Power| 28W
Average active efficiency| 86,7%
Efficiency at low load (10%)| 89,81%
No load power consumption| 0,1W

This product specifications and design are subject to change without notice!

GUARANTEE
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-offcial service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

DISCLAIMER

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service

For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>