Rollei 28195 Lumen Studio 150 LED Continuous Light with Bowens S-type Mount Instruction Manual

: June 6, 2024
: Rollei

Table of Contents

Before the First Use
Explanation of Symbols
Overview
Operating the Rollei Lumen Studio 150
Bowens S-type Mount
Display
Adjusting the Brightness
Rollei Lumen App / Bluetooth®*
Technical Data
Safety Instructions
Disposal
Conformity
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lumen Studio 150
LED Continuous Light with Bowens S-type Mount

Before the First Use

Read the operating instructions and the safety instructions carefully before using the device for the first time.
Keep the operating instructions together with the device for future use. If other people use this device, make this manual available to them. If you pass on the device to a third party, this manual belongs to the device and must be supplied with it .

Explanation of Symbols

The following symbols are used in this manual, on the LED light or on the packaging.
Products marked with this symbol comply with all relevant community regulations of the European Economic Area.
Products marked with this symbol are operated with alternating current.

Overview

1. LED
2. Release Bowens S-type mount
3. Carrying handle
4. Display
5. Touch sensor buttons for the regulation of the brightness| 6. On / off switch
7. Mains cable socket
8. U mount*
9. Lamp tripod lock
10. Bowens S-type mount
---|---

Operating the Rollei Lumen Studio 150

Insert the mains cable supplied into the mains cable socket [7] of the Rollei Lumen Studio 150. Press the on/off switch (5) to position „I“ to switch on the LED light. In position „O“, the light is switched off.
Note: Before use, remove the safety cap on the LED continuous light by using the bayonet release button. After use, put the safety cap back on by placing it on the LED continuous light like a light shaper and letting it click into place (for instructions see „Bowens S-type Mount“).

Bowens S-type Mount

The Rollei Lumen Studio 150 is equipped with a Bowens S-type mount for the use of various light shapers (softboxes, reflectors, beauty dishes, etc .) .
Insert the light shaper with the three bayonet pins into the corresponding recesses on the LED lighting head and lock it by turning it briefly to the right until it audibly clicks into place .
To remove the light shaper, pull the bayonet release button to the rear, turn the light shaper to the left and pull it off to the front .

Display

Brightness in %
Temperature of the LED continuous light
Bluetooth®*
Color temperature
Touch sensor buttons for the regulation of the brightness

Adjusting the Brightness

Set the brightness via the touch sensor buttons for the regulation of the brightness [5]. The brightness can be set between 0% and 100% in 1% steps.

U-bracket
To enable the LED light to also be mounted from above (e .g . on the ceiling), the unit is attached using the useful U bracket. You can loosen the knobs on the sides, turn the bracket around and mount it again from above. This ensures that the heat is still reliably dissipated.

Rollei Lumen App / Bluetooth®*

Rollei Lumen App
Download the ”Rollei Lumen“ app directly from the App Store or the Google Play Store (iOS 9 .0 or higher, Android 5 .0 or higher).

Connection with the smartphone

Activate Bluetooth®* on your smartphone.
Switch on the Rollei Lumen Studio 150 continuous light.
Open the ”Rollei Lumen“ app, the connection to your phone will be established automatically.

Note:

The connection is established using ”Bluetooth® Low Energy“ (BLE). For this, a location release of the app is required. The connection to the LED light is established directly in the app.

|
---|---
| https://www.rollei.de/app/googleplaystore/rolleilumen

Technical Data

Power LED	150 W
Color temperature	5,500 K ± 200 K
Color rendering index	95+
(CRI)	Television Lighting
Consistency Index (TLCI)	96+
Power adjustment	0 – 100% in 1% steps
Illuminance	20,768 lx (0 .5 m at 5,500 K; without reflector)
Bowens S-type mount	Yes
Remote control	Via Rollei Lumen app
*Bluetooth® version**	4 .0
Radio frequency band	2 .400 – 2 .480 GHz
Max. transmission power	8 dBm
Power supply	AC 100 – 240 V / 47 – 63 Hz
Energy efficiency level	A+
Spectrum	A+++ to D
Volume cooling fan	< 20 dB (0 .5 m)
Connections	Power cord, Bowens S-typeMount
**Dimensions	Weight**
Box Content	Rollei Lumen Studio 150, mains cable

Without U bracket and safety cap. Technical details are subject to change without notice. Misprints and errors excepted . Reproduction of these operating instructions – even in part – is not permitted.

Safety Instructions

Danger from electric current!
Faulty electrical installations or excessive mains voltage can cause electric shock .

Only connect the product if the mains voltage of the socket corresponds to the specifications on the type plate .
Connect the product to an easily accessible power outlet so that you can quickly disconnect it from the mains in case of problems .
Use only the supplied mains cable .
Do not use the product if it is visibly damaged or if the cable is defective .
If the product or its accessories are damaged, they must be replaced or repaired by the manufacturer, its service department, or a similarly qualified person to prevent hazards
The housing must not be opened and repairs must only be carried out by a qualified technician. To do this, contact a specialist workshop. Any liability and all warranty claims are excluded in the event of repairs by the user, improper connection, or incorrect operation .
Do not use the product with an external timer or a separate remote control system.
If you do not use the product for a long period of time, always disconnect it from the power source .
Protect the product from moisture. Do not touch the product with wet/damp hands or immerse it in water .
This product is not waterproof! Do not use this product in the rain or in wet environments. Never touch the product during a thunderstorm .
Before disconnecting the power or battery, switch off the unit at the main switch .

Caution!

Never use the mains cable as a carrying handle .
Keep the product and accessories away from naked flames, hot surfaces and easily flammable materials .
Lay the mains cable in such a way that it does not present a tripping hazard.
Do not bend the power cord or lay it over sharp edges.

Caution!
Danger for children and persons with limited physical, sensory or mental abilities (e.g. partially disabled, elderly persons with limited physical and mental abilities) or lack of experience and know-how (e.g. older children).

This product may be used by persons with reduced physical, sensory or mental abilities or lack of experience and knowhow, provided that they are supervised or have received instructions for the safe use of the product and understand the potential hazards arising from its use. Children must not play with the product. The product must not be cleaned or maintained by children. Keep children under eight years of age away from the product and its accessories .
Do not insert any objects into the product .
Do not leave the product unattended during operation .
The product is not a toy. Keep the product, accessories, and packaging materials away from children and animals to prevent accidents and suffocation .
For photographic lighting purposes only. Not suitable for permanent room lighting .
Do not film car, bus, bicycles, motorbike, or train drivers while driving this product. The driver may be blinded and cause an accident. This also applies to unlisted persons or groups if possible glare could cause an accident.
Do not shine directly into the eyes of people or animals as this may cause damage to the retina, visual disturbances and even blindness.
Ensure adequate ventilation during operation. Never cover the ventilation slits of the unit .
Do not use or store the unit in high temperatures or in closed rooms exposed to direct sunlight. The product should not be used in ambient temperatures above 40°C.

Disposal

Dispose of the packaging according to its type.
Use the local possibilities for collecting paper, cardboard, and other materials . (Applicable in the European Union and other European countries with systems for the separate collection of recyclable materials

Devices that are marked with this symbol must not be disposed of with household waste! You are legally obliged to dispose of old devices separately from to dispose of household waste. Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.