MAIL BOSS 7058 Post Height Extension Instructions
- June 10, 2024
- MAIL BOSS
Table of Contents
7058 Post Height Extension
Instruction Manual
Congratulations on the purchase of your Mail Boss® Post Height Extension. This
Post Height Extension is constructed of tough 14 gauge galvanized powder
coated steel and will mate perfectly with your Mail Boss® post and mailbox.
Included with the Mail Boss® Post Height Extension are four 12 mm bolts for
attachment to your Mail Boss® mailbox.
If you require assistance with assembly or part replacement, or for any other
matter, contact the toll-free Epoch Design Service Center from anywhere in the
Continental United States, Monday through Friday, 9AM – 5PM PST at
1-800-589-7990. You may also email your
request or comments to info@mailboss.com and a
service representative will respond. You can also find helpful hints and tips
on our website: www.mailboss.com.
-
Attach the post extension bracket to your post using the existing post bolts provided.
You will need to use a socket wrench with at least a 6″ extension. -
Install your mailbox onto the post extension bracket using the four 12mm bolts provided.
Have a question?… Need a part
ASAP?…1-800-589-7990
Copyright © 2022 Epoch Design™ All rights reserved
Documents / Resources
| MAIL
BOSS 7058 Post Height
Extension
[pdf] Instructions
7058 Post Height Extension, 7058, Post Height Extension, Height Extension,
Extension
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>