365iD Multiple Validate ID Documents Scanners Instruction Manual
- June 15, 2024
- 365iD
Table of Contents
INTEGRATION MANUAL
Multiple 365id Scanners with Mews
GLOBAL ID VERIFICATION
CHECK 365ID SCANNER SETTINGS IN MEWS
All 365id Scanners must be correctly set in Mews up to work correctly. If not,
information from the scans will not be transferred into Mews.
STEP 1
From the Mews mail menu go into the Marketplace submenu. STEP 2
In Marketplace select My subscriptions. Check that there is only one “365id
Scanner” and one “Passport scanner integration”. Any multiple subscriptions
must be removed. If you had multiple 365id Scanners you must report your
remaining access token to support@365id.com to get
a working integration. See the “Find my access token” later on in this
document STEP 3
Select Passport scanner integration -> Edit and then Passport Scanners.
STEP 4
Check that all 365id Scanners that shall be used is named and the correct
serial number is present. STEP 5
Go back to My Subscriptions and select 365id Scanner -> Edit STEP 6
Under Connected devices select the 365id Scanners that shall be active and
then press Save. Check that Mews verifies that the changes are saved. STEP 7
Now all selected 365id Scanners are ready for use
FIND MY ACCESS TOKEN
The 365id integration must have the correct access token to work. You can find your access token under Marketplace -> My subscriptions -> 365id Scanner