sauermann HVACR Measuring Instruments User Guide
- June 6, 2024
- sauermann
Table of Contents
- 1 Key operation for Si-HH3, Si-PM3, Si-TT3, Si-VH3 and Si-VV3
- 2 Key operation for Si-TI3
- 3 Insert the batteries in the instrument
- 4 Download Si-HVACR Measurement Mobile App
- 5 Display measurement
- 6 Emissivity (Si-TI3 only)
- 7 Operating temperature, protection of the instruments and information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
sauermann HVACR Measuring Instruments User Guide
These portable instruments are used to measure the following parameters:
temperature, relative humidity, pressure, airflow and air velocity.
Hereby, Sagerman Industry SAS declares that the radio equipment type HVACR
Portable is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.sauermanngroup.com
1 Key operation for Si-HH3, Si-PM3, Si-TT3, Si-VH3 and Si-VV3
Power Down menu
The instrument is supplied with auto-off activated. Enter in the Power Down
Menu when starting the instrument to deactivate it.
2 Key operation for Si-TI3
To activate/deactivate the laser dot, press (1) and (4) keys simultaneously. To get information on other functions, please read the full technical manual downloadable from the QR code at the end of this document.
3 Insert the batteries in the instrument
- Unscrew (all instruments except Si-TI3) and remove the batteries cover 1 .
- Insert 3 (all instruments except Si-TI3) or 2 (only Si-TI3) alkaline batteries LR03 AAA 1.5 V respecting the polarity.
- Replace and screw (all instruments except Si-TI3) the batteries cover.
4 Download Si-HVACR Measurement Mobile App
- Flash the QR code to download Si-HVACR Measurement MobileApp application on your smartphone. OR
- Write “Si-HVACR Measurement MobileApp” in the search bar then validate.
- Download Si-HVACR Measurement MobileApp application by pressing its icon.
- Follow your smartphone indications.
http://qrcode.inair.cloud/sauermann/hvacr_MobileApp
4a Connect the smartphone and the instrument (all instruments except Si-
TI3)
- Turn on the instrument with a long press on ON/OFF key.
- Press ON/OFF and HOLD keys to activate the wireless communication. The wireless communication icon flashes on the instrument screen.
- Launch Si-HVACR Measurement MobileApp application by pressing its icon.
- Press “Search for devices”.
- Press the line of the required device then “Connect”. The wireless communication icon becomes fix when the instrument is paired to the tablet or the smartphone.
Google Play and the Google Play logo are trademarks of Google LLC. / App Store is a service mark of Apple Inc.
4b Connect the smartphone and the instrument (Si-TI3 only)
The Si-TI3 is automatically turned on with wireless communication activated when inserting batteries.
- Launch Si-HVACR Measurement MobileApp application by pressing its icon.
- Press “Search for devices”.
- Press the line of the required device then “Connect”.
The Si-TI3 will automatically shut-off after 15 s of non-use.
5 Display measurement
Once the instrument is connected to the smartphone, measurements are displayed.
6 Emissivity (Si-TI3 only)
Emissivity is a term used to describe the energy-emitting characteristics of materials. See table below for values of emissivity of specific materials:
Set emissivity
- With the device turned on.
- Press Mode key then use Lock key to increment or Unit key to decrease the emissivity value.
- The emissivity can be changed from 0.10 (10E) to 1 (100E).
- Press Mode key to confirm.
7 Operating temperature, protection of the instruments and information
about storage and batteries
- Si-HH3 / Si-TI3 / Si-TT3: from -10 to +60°C (14 to 140°F)
- Si-HH3: IP20
- Si-PM3 / Si-VH3: from 0 to 50°C (32 to 122°F)
- Si-PM3: IP40
- Si-VV3: from 0 to 40°C (32 to 104°F)
- Si-TT3 / Si-VH3 / Si-VV3: IP54
If the instrument is stored outside the operating temperature (for example in a van, a warehouse,…) please wait for 10 minutes in its operating temperature before starting and using it.
To ensure safety, replace batteries with the same type. Not doing so runs the rise of explosion. Dispose of used batteries according to instructions.
Download the full manual
Sauermann Industrie
ZA Bernard Moulinet
24700 Montpon France
T. +33 (0)5 53 80 85 00
services@sauermanngroup.com
Sauermann NA
415 Oser Avenue, Ste. P
Hauppauge, New York 11788
T. (+1) 631-234-7600
F. (+1) 631-234-7605
Sauermann GmbH
Leibnizstraße 6
D – 74211 Leingarten
T. +49 (0)7131/399990
F. +49 (0)7131/399992
info.germany@sauermanngroup.com
Sauermann Ibérica
C/Albert Einstein 33.
Planta 3. P. I. Santa Margarida II08223 Terrassa (Spain)
T. +34 931 016 975
info.spain@sauermanngroup.com
Sauermann UK
Units 7-9, Trident Business Park
Amy Johnson Way
Blackpool – FY4 2RP
T. +44 (0) 870 950 6378
F. +44 (0) 870 950 6379
info.uk@sauermanngroup.com
Sauermann Italia srl
Via Golini 61/10
40024 Castel S.Pietro Terme (BO)
T. (+39)-051-6951033
F. (+39)-051-942254
info.italy@sauermanngroup.com
Sauermann Australia
Unit 4/14 Rodborough Road, Frenchs Forest,
NSW 2086
T. (+612) 8880 4631
Sauermann China
Room 401-6, Building 8, No. 3000 Longdong Ave. Pudong
New District
Shanghai 201203/R.P. China
T. +86-21-61001877
F. +86-21-61001870
info.china@sauermanngroup.com
QSG_HVACR-Portable-instruments – 21/04/2021 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice