AWOW AK41 Mini Desktop PC User Guide
- June 6, 2024
- AWOW
Table of Contents
MINI PC
AK41
Quick Guide
Packing
HDMI Cable
SATA Cable (inside the device)
Screws for SSD/HDD installation
Port Layout
Connection
- Turn on the TV or Monitor
- Connect the Mini PC AK41 to the HDMI connector of the TV or monitor with an HDMI cable
- Connect the power adaptor into the wall socket, and the other end into the power input port of Mini PC AK41
- Push the power button, then the device starts
Configuring audio output via an HDMI device or Audio digital devices
Follow the steps below to enable audio output when connecting the mini PC to a
TV or audio digital device via HDMI or 3.5mm audio jack.
- Access the Sound settings via the System Control Panel.
- Under Playback devices, click the display device that corresponds with your HDMI audio-compatible display.
- Click the Set Default button in the lower right-hand corner.
- Click OK to exit the setup.
If you want to use a local account instead of a Microsoft account to log in the computer, please do not connect the internet during your first setting up.
Specifications
| CPU | Intel Processor J4125/J4115 |
|---|---|
| Intel HD Graphics 600 | |
| Memory | 8GB LPDDR4 |
| Storage | 128GB / 256GB SSD |
| Operating System | 100M/1000M Gigabit Ethernet |
| Ethernet | 802.11 b/g/n WiFi / Bluetooth |
| Wireless | Windows 10 |
| Connectivity | USB 3.0 / USB 2.0 / TF Card Slot / |
2.5“ SATA HDD/SSD (Optional)
Customer Service
www.awowtech.com
[email protected]
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.