AWOW CreaBook i540 Full HD Laptop User Manual

CreaBook i540
User Manual

Note:
This manual is mainly for Windows 10. There might be some slight differences if you use other windows systems.
This manual contains the common functions of most models. Maybe it does not fit very well with your model for some functions, or maybe some of your model functions are not contained in this manual.
The illustrations in this manual may differ from the actual products. Please prevail in kind.
Before using the computer, please read the safety precautions and important tips carefully and patiently!

Chapter 1 – Know your computer

Front View

Attention:
When you close the display, please be careful not to leave pens or any other objects between the display and the keyboard. Otherwise, the display may be damaged.

1. LCD| The LCD display with LED backlight provides brilliant visual output.
---|---
2. Build-in Camera| Use the camera for video communication and taking photos.
3. Built-in Mic| Capture sound which can be used for video conferencing, voice narration or audio recording.
4. Power button| Press this button to turn on the computer.
5. Touch pad| The touch pad functions as a conventional mouse.
One piece multi-touch.
Click Pad: To move the pointer on the screen, slide your fingertip over the pad in the direction where you want the pointer to move. Left-click area: Clicking in this area corresponds to the function of clicking the left button of a conventional mouse.
Right-click area: Clicking in this area corresponds to the function of clicking the right button of a conventional mouse.

Left View

USB Port:
You can connect a USB device to your computer by inserting its USB plug (Type-A) into the USB port on your computer.

Right View

Micro SD Card Slot:
The computer supports the following types of memory cards:

• Micro Secure Digital (SD) card
• Micro Secure Digital High Capacity (SDHC) card
• Micro Secure Digital Extended Capacity (SDXC) card

Note:

1. You can only insert one memory card each time.
2. Please insert memory card until into the bottom of the slot.
3. Gently pull the memory card out of the slot if you want toremove it.
4. Before removing the memory card, safely remove hardware and eject media utility to disable the card to avoid the loss or error of data

Bottom View

Using the keyboard
Keyboard function keys
Pressing certain function key to enter the corresponding system settings immediately.

Keyboard Function:

| Turn the laptop to sleep|

| Turn on/off flight mode
---|---|---|---

| Muten|

| Volume down

| Volume up|

| Turn down display brightness

****+

| Turn up display brightness|

| Switch display

| Turn off display|

| Setting

 Prt Scr

| Print screen, Take a screenshot| ****| Number Lock

 Scr  LK

| Scroll Lock|

| Turn on/off Touchpad

Function key combinations:
Through the use of the function keys, you can change operational features instantly. To use this function, press and hold ; then press one of the function keys.

The keypad function Combinations:
Through the using of the Keypad keys, you can change operational features instantly. To use this function, press ; turn on the keypad functions，then press one of the function keys. If you press again ， the keypad function will be turned off.

Chapter 2 – Operating Windows10

Configuring the operating system in initial use You need to configure the operating system the first time you use it.
The configuration process may include the following steps:

1. Accepting the End User License Agreement
2. Configuring the Internet connection
3. Registering the operating system
4. Creating a user account

Operating System Interface
Windows 10 comes with a powerful and useful start menu
To open the start menu, do one of the followings:

• Press the Windows key on the keyboard
• Select Start on the lower-left corner of the desktop
  

1.  Settings button
2. Power button
3. Start button
4. Search bar

Settings Button
Settings let you perform basic tasks. You can also search for more settings with the settings search bar in the upper-right corner. To open the settings, do the following: Open the Start menu and select Settings .

Power Button
The power button is on the Start menu, by clicking it, the computer can be shut down, restarted or changed into sleep mode.
Start Button
Select the Start button on the taskbar, open the start menu.
Search Bar
Search for anything, anywhere.
Start menu

• You can personalize the start menu with your favorite apps.
  To personalize the Start menu, do the following:

• Right-click the application which you want to add to the Start menu, then select Pin t o Start menu.
  

NOTE: You can also drag apps from the most used or apps columns to add them to the start menu.

Keep the computer in sleep mode or shut down
When you finish using your computer, you can turn the computer into sleep mode or shut it down.
Putting your computer to sleep
1. If you will be away from your computer for only a short time, change the computer into sleep mode.
2. When the computer is in sleep mode, you can quickly wake it to resume using, bypassing the startup process.
To turn the computer to sleep mode, do one of the followings:

• Close the display lid.

• Press the Power button.

• Open the Start menu, and then select power – sleep
  To wake the computer, do one of the followings:

• Press any key on the keyboard. (Notebook only)

•  Press the power button.

Turn off the computer
If you will not use your computer, please turn off the computer.
To shut down the computer, do one of the followings:

• Open the Start menu, and then select power – shut down.
• Right-click the Start button on left bottom, and then select shut down or log off.

Tasks view
To open the task view, do one of the followings:

• Select the task view button on the taskbar.
• Press the Windows + Tab key.
• Swipe from the left edge of the screen to the middle.

Connect to the wireless network
Enabling wireless connection
To enable the wireless feature, do the followings:

• Click the network menu on the right bottom of the taskbar to open the Network configuration
  Connect to a wireless network

• The computer will automatically scan for available wireless networks which will be shown in the list when wireless is enabled.

• Click the network name in the list, and click Connect.

NOTE: The connection of the networks sometimes requires a ecurity key or password, which you need to ask your network administrators or service provider.

Chapter 3 – Troubleshooting

Display issues

When turning on the computer, nothing appears on the screen.

• If the screen is blank, please make sure:
  The AC power adapter is connected to the computer and plugged into a working electrical outlet.
  The computer power is on. Press the power button again to confirm.

• If these items are properly set, and the screen remains blank, you need to have the computer repaired.
  The screen goes blank while the computer is on.

• Your screen saver or power management may be enabled. Do one of the following to resume from sleep mode:
  Press any key on the keyboard. (Notebook only)
  Press the power button.

Sleep problems
The critical low-battery error message appears, and the computer immediately turns off.

• The battery power is getting low. Connect the AC power adapter to the computer.

The computer does not return from sleep mode, and the computer does not work.

• If the computer is in sleep mode, please connect the AC adapter to the computer, and then press the Power button.
• If the system still does not return from sleep mode, stops responding, or cannot be turned off, reset the computer. Unsaved data may be lost. To reset the computer, press and hold the Power button for eight seconds or more. If the computer still cannot be reset, remove the AC power adapter.

Voice problems

Even turning up the volume, you still cannot hear any sound from the speaker.
Make sure that:
The mute function is turned off.
Do not use a combo audio jack.
The speakers are selected as playback device.
Battery problems
Your computer shuts down before the battery indicator shows empty.
Recharge the battery.
Other problems
The touchpad does not function well
Press key “Fn+Space” to make sure the touchpad is turned on.
The computer is not responding

• To turn off your computer, press and hold the Power button for eight seconds or more. If the computer still does not respond, remove the AC power adapter.
• Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network.

The connected external device does not work

• Do not connect or disconnect the non-USB cable device in the boot state, otherwise you may damage your computer.
• When using high power consumption external devices such as an external USB optical disk drive, use an external device power adapter. Otherwise, the device may not be recognized, or the system may shut down as a result.

Product Specifications

https://qrs.ly/ljcfei6

SCAN ME TO EXTEND YOUR WARRANTY TO 36-MONTH JUST 60SECONDS

| Name: SC ENIF PEGASUS SRL
Add: Bucuresti sector 2.Strada RADEOVANU Nr.7 Bloc 42.scara 1.
Etaj 5 Ap29
Zip Code: 02283
Contact Person: Pmeria
Tel/Fax:0040768511765
E-mail:[email protected]
---|---
| Name: ERMENEGIDO SMART LIMITED
Add: 6 PROSPECT WAY ROYAL OAK INDUSTRIAL ESTATE
DAVENTRY NORTHAMPTONSHIRE UNITED KINGDOM NN11 8PL
Zip Code: 02283
Contact Person: Mihai Lambert
Tel/Fax:00442037697376
E-mail:[email protected]

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

AWOW Technology (Shenzhen) Co., Ltd. Address: A602-603, jinfulai Building, Dabao Road, Xinan Street, Baoan District, Shenzhen, Guangdong Customer Service:[email protected] Wholesale Business:[email protected] Extend Your Warranty to 36-Month within Just 60 Seconds. Register NOW https://awowtech.com/warranty
MADE IN CHINA

Documents / Resources

| AWOW CreaBook i540 Full HD Laptop [pdf] User Manual
I540, 2A2V4-I540, 2A2V4I540, CreaBook i540 Full HD Laptop, CreaBook i540, Full HD Laptop
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>