GE Appliances G8H1AASSPSS Immersion Blender Owner’s Manual

OWNER’S
MANUAL
G8H0AASSPSS

Write the model and serial numbers here:
Model # _____
Serial # _____
Find these numbers on a label
on the back of the unit.
GE is a trademark of the General Electric Company. Manufactured under trademark license.
49-9000008 Rev. 3 04-21 GEA

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNING
When using this electrical appliance, which has sharp, moving parts, follow these important safeguards to prevent a risk of personal injury:

• READ ALL INSTRUCTIONS.
• Be certain the cover is securely locked in place before operating the appliance.
• Household use only.
• To protect against electrical shock, do not put the motor body, cord or electrical plug of this hand blender in water or other liquid. The detachable blending shaft of this appliance has been designed for immersion into water or other liquids. Never submerge any other portion of this unit. If the hand blender falls into a liquid, remove it immediately. Do not reach into the liquid without unplugging the unit first.
• This appliance should not be used by children and care should be taken when used near
• Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact GE Appliances at the website listed in the Contact Us section for information on examination, repair, or adjustment.
• The use of attachments or accessories not recommended or sold by GE Appliances may cause fire, electrical shock, risk of injury, or damage to your immersion blender
• Do not use outdoors, or use for other than intended use.
• Do not let any cord hang over the edge of the table or counter.
• Do not let cord contact hot surfaces, including
• When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage, splattering, and the possibility of injury from burning.
• Blades are SHARP. Handle carefully when unpacking, removing, inserting, or cleaning. Exercise the same care when removing or inserting the cutting blade for the chopper
• Check the chopper for the presence of foreign objects before using it.
• During operation keep hands, hair, clothing, as well as spatulas and other utensils away from attachments and any mixing container, to prevent the possibility of severe injury to persons, and/ or damage to the appliance. A spatula may be used but must be used only when the unit is not
• Remove the detachable shaft from the blender before washing the blades or shaft.
• Make sure the appliance is off, the motor has stopped completely, and the appliance is unplugged from the outlet before putting on or taking off attachments, and before cleaning.
• The maximum rating of 500W is based on baby food chopper attachment that draws the greatest
• Never process ICE or other hard foods such as coffee beans, rice, frozen foods, spices, cereal or chocolate bars in the chopping bowl as damage to the blades may result.
• Never mix dry, thick, or heavy mixtures for more than 15 seconds. Stop operation and stir the ingredients before continuing. Mow the motor to rest for 1 minute between each use.
• Never immerse the motor body in water or other liquids.

NOTICE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature or modify the plug in any way.

WARNING
RISK OF PERSONAL INJURY HOLD THE BLADE ASSEMBLY BY THE PLASTIC STEM ONLY. DO NOT TOUCH THE RAZOR-SHARP BLADES.
READ AND SAVE THESE INSTRUCTIONS

PARTS

Parts

• Top Wrap (Cord Neck located on backside)
• Low Button
• High Button
•  Handle Grip
• Main Body
• Base (Attachments connect here)
• Wand
• Whisk
• Chopper
• Beaker

ACCESSORY GUIDE
Main Body (E): G8H0AASSPSS & G8H1AASSPSS
Wand (G): G8H0AASSPSS & G8H1AASSPSS
Whisk (H): G8H1AASSPSS & G8HKAASSRSS
Chopper (I): G8H1AASSPSS & G8HKAASSRSS
Beaker (J): G8HKAASSRSS Only

GETTING STARTED / CONTROLS

Getting Started

Before First Use

AWARNING RISK OF PERSONAL INJURY

The blending blade is extremely sharp. Use caution when removing and unpacking.
Before using the blender for the first time, we recommend that you wipe the motor body with a clean, damp cloth to remove any dirt or dust. Dry it thoroughly with a soft absorbent cloth. HANDLE CAREFULLY; wash blade assembly, mixing container, and detachable shaft by hand or in the dishwasher. Dry thoroughly before use. Read all instructions completely for detailed operating procedures.

Features and Benefits

1. Speed Buttons: Press and hold down the preferred speed. Once the button is released, blending will stop.
2. Comfort Handle: The handle allows you to control the hand blender with ease.
3. Motor Body Housing
4. Detachable Shaft: Twisting and sliding off from the motor housing will detach the shaft for easy cleaning.
5. Blending Attachment with Stainless Steel Blade and Blade Guard: This attachment easily twists into the motor body housing. The permanently mounted stainless blade is partially covered by a stainless housing that keeps splashing to a minimum.
6. Whisk Attachment: Whisk attachment twists into the motor body housing. This attachment is great for whipping cream, egg whites and other delectable treats.
7. Chopper/Grinder Attachment: Chop, mince, and grind. Chopper/Grinder attaches to the blender motor body in place of the blender shaft or whisk attachment.

Controls

High and Low Buttons

Speed Buttons: Press and hold down the preferred speed.
Once the button is released, blending will stop.

FUNCTIONS

Assembly of Attachments

Blending Attachment:

1. Align the motor body with the blending attachment, then slide the pieces together. Twist the motor body clockwise and feel the pieces click together.

Chopper/Grinder Attachment:

1. Put the prep bowl on a flat, dry, stable surface.
2. The metal blade assembly shaft is attached to the bottom of the prep bowl. If not already in place, slide the blade assembly over the top of the metal blade assembly shaft.

WARNING HOLD THE BLADE

ASSEMBLY BY THE PLASTIC STEM ONLY. DO NOT TOUCH THE RAZOR-SHARP BLADES.

3. The chopper cover can only sit into the prep It cannot be rotated.
4. Connect the motor body to the top of the chopper/grinder attachment cover.
5. Plug the power cord into an electrical outlet.
6. Put one hand on the cover of the chopper/ grinder attachment, while gripping the handle with the other. Press the High or Low button with your fingers to start the motor and run the chopper/grinder. To turn the unit off, remove your fingers from the selected button.
7. WHEN THE BLADE STOPS MOVING, unplug the Hand Blender, remove the motor body from the chopper/grinder cover, and remove the cover from the prep bowl.

Whisk attachment:
Align the motor body with the blending attachment, then slide the pieces together. Twist the motor body clockwise and feel the pieces click together.

Operation

Blending & mixing:
The specially designed blade is for mixing and stirring all kinds of foods, including salad dressings, powdered drink products, and sauces. It is ideal for combining dry ingredients and can be used to emulsify mayonnaise, too. This blade mixes and stirs while adding only a minimum of air to your mixture. A gentle up-and-down motion is all you need to make the most flavorful, full- bodied liquid recipes. Be careful never to remove the blender from the liquid while in operation to avoid splatters.

1. Insert the blending attachment into the motor
2. Plug electrical cord into an electrical wall
3. Insert blending shaft into mixture to be
4. Press and hold the On/Off button. The hand blender will continue to run as long as the switch is pressed in. To turn hand blender OFF, release the On/Off button and the motor will stop.
5. Do not hold the button On for longer than 50 seconds at a time.
6. Unplug immediately after use.

NOTE: When using a blender in a saucepan, remove the pan from stove.

Whisking:

1. Insert the whisk attachment into the motor body.
2. Plug the electrical cord into an electrical wall socket.
3. Insert the whisk into the mixture to be blended.
4. Press and hold the desired speed button. When done whisking, release the speed button.
5. Unplug immediately after use.

Chopping and Grinding Processing Food:

1. Put the prep bowl firmly on a flat sturdy surface like a countertop.

2. Put food into the prep bowl. Be sure the food is cut into small pieces, and the bowl is not

3. Put the chopper/grinder cover on top of the prep bowl. Be sure the cover is properly seated.

4. Press the ON/OFF button.
   NOTE: Due to the powerful motor provided with this unit, it is recommended to use one hand to support the chopper/grinder during operation.

5. When you have finished processing the food, stop the machine by taking your fingers off the ON/OFF button.

6. WHEN THE BLADE STOPS MOVING, remove the blender motor body from the chopper/grinder cover, and remove the cover from the chopper/grinder.

7. Unplug the unit

8. Carefully remove the blade assembly, holding it by gripping the plastic stem. NEVER TOUCH THE BLADE ITSELF

9. Remove food with the spatula. Note: Do not operate the Chopper/Grinder attachment without food in the prep bowl.

Care and Cleaning

Cleaning and Maintenance

Always clean the motor body and blending shaft thoroughly after using. Remove the blending shaft from the motor body. Clean the motor body only with a sponge or damp cloth. Do not use abrasive cleaners which could scratch the surface. To clean the blending shaft, wash by hand in hot water using mild detergent. Be mindful of the permanently mounted razor-sharp edges.

A CAUTION
FOR YOUR

SAFETY
NEVER immerse the motor body in water or other liquids.
When the appliance has malfunctioned or has been dropped or damaged in any way or is not operating properly, contact the manufacturer at the website listed in the Contact Us section for information on examination, repair, or adjustment Any other servicing should be performed by an authorized service representative.

Chopper/Grinder Attachment
To simplify cleaning, rinse the prep bowl, cover, and blade immediately after use, so that food won’t dry onto them. Wash blade ring, plastic sheath, and prep bowl in warm soapy water. Rinse and dry. Wipe the underside of the chopper/grinder cover with a sponge or damp cloth to remove any food. Do not submerge the cover in water or put in the dishwasher. Wash the blade carefully. Avoid leaving it in soapy water where it could disappear from sight. If you have a dishwasher, you can wash the prep bowl blade assembly on the upper shelf. Insert the prep bowl upside down. Put the blade in the cutlery basket. Unload the dishwasher carefully to avoid contact with the sharp blade. Wipe the motor body and top of the cover with a damp sponge or cloth. Dry it immediately. Never submerge the motor body or the cover in water or other liquid. The chopper/grinder attachment is intended for HOUSEHOLD USE ONLY. Any service, other than cleaning and normal user maintenance, should be performed by an authorized Service Representative.

Whisk attachment

To clean your whisk attachment, simply release the attachment from the motor body housing. Once the whisk is removed, detach the metal whisk from the gearbox by pulling pieces apart. To clean the gearbox, simply wipe it with a damp cloth. To clean the metal whisk, wash with warm, soapy water or in the dishwasher. Do not submerge the gearbox in water or any other liquid.

Tips and Hints

1. The liquid should come within an inch of where the shaft attaches to the motor
2. Some spices may scratch the chopper/ grinder attachment.
3. When using a nonstick cooking surface, be careful not to scratch the coating with the hand blender.
4. Do not immerse motor body housing, chopper/grinder cover, or whisk gearbox in water or any other liquid.
5. Cut most solid foods into 1/2-inch cubes for easy blending. Suggestion: use chopper/ grinder for chopping and grinding solid
6. Pour liquid ingredients into the mixing container first, unless the recipe instructs
7. To avoid splashing, don’t turn the hand blender on until the blade is beneath the surface of the mixture, and do not pull the hand blender out of the mixture while the blender is running.
8. Do not let hand blender stand in a hot pot on the stove while not in use.
9. Do not put fruit pits, bones, or other hard material into the blending mixture, as these are liable to damage the blades.
10. Do not fill mixing containers too full. The level of the mixture will rise when blending and can overflow.
11. Adding liquids that are warm, not cold, facilitates blending solids with liquids.
12. For recipes calling for ice, use crushed ice (not whole cubes) for best results.
13. Using a gentle up-and-down motion is the best way to blend and incorporate ingredients uniformly.
14. To avoid a spatter, turn the hand blender off and let the blade stop completely before lifting the unit out of the mixture you are processing.
15. To whip air into a mixture, always hold the blade just under the surface.
16. To make a soup creamy in texture, use the hand blender to purée the soup solids to the desired consistency using a gentle up-and down motion right in the You can quickly change your soup into a thick and creamy blend.
17. If you are making a dip or spread, it is not necessary to process completely into a smooth purée; leave some texture for
18. When making compound butter, remove the butter from the refrigerator and let it come to room temperature before blending in the ingredients.

LIMITED WARRANTY

GE Appliances Limited Warranty

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit geappliances.com/contact for product care/maintenance self-help.
To initiate a warranty claim, please visit geappliances.com/contact, or call 1-800-GECARES.
Please have your model number and serial number available. Return and packing instruction information will be provided at that time.

One Year
From the date of the original purchase| If the food processor fails due to a defect in materials or workmanship, during the limited one-year warranty, GE Appliances will either repair your product, replace your product with a new or remanufactured product, or refund the purchase price of the product at GE Appliances sole discretion.

What GE Appliances Will Not Cover:

• Service trips to your home.
• Improper installation, delivery, or maintenance.
• Failure of the product if it is abused, misused, or used for other than the intended purpose or used commercially.
• Replacement of house fuses or resetting of circuit breakers.
• Damage caused after delivery.
• Damage to the product caused by accident, fire, floods, or acts of God. by possible defects with this appliance.
• Labor and other charges to install and/or remove the product

EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedies are product exchange or refund as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

For US Customers: This limited warranty is extended to the original purchaser for products purchased for home use within the USA. In Alaska and Hawaii, the limited warranty does not include the costs of shipping units.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.

Warrantor: GE Appliances, a Haier company
Louisville, KY 40225

For Customers in Canada: This limited warranty is extended to the original purchaser and any succeeding owner for products purchased in Canada for home use within Canada.
In-home warranty service will be provided in areas where it is available and deemed reasonable by Mabe to provide. For extended warranty information, visit geappliances.ca/purchase-extended-warranty

Warrantor Canada: MC Commercial, Burlington, Ontario, L7R 5B6

Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.

Consumer Support

Service and Registration
Register your new appliance online at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise.
Register your appliance at GEAppliances.com/register.
In Canada, service.geappliances.ca/servicio/en_CA/

Contact Us
If you are not satisfied with the service you receive from GE Appliances, contact us on our A website with all the details including your phone number, or write to:
In the US: General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville, KY 40225 GEAppliances.com/contact
In Canada: Director, Consumer Relations, MC Commercial Inc. | Suite 310, 1 Factory Lane | Moncton, N.B. E1C 9M3
GEAppliances.ca/en/contact-us

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family.
We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too.
Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>