VIKING Smartech III QC3.0 25000mAh Power Bank User Manual

: June 6, 2024
: VIKING

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
COMPATIBILITY
Powerbank
“Pass-through” FUNCTION
FCC STATEMENT
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIKING Smartech III QC3.0 25000mAh Power Bank User Manual

Thanks for choosing our products. In order to offer you a satisfied experience, please read this manual carefully before using our products. First time use, please use up the power, and then charge the power bank to make sure it could work with best function.

IMPORTANT SAFETY INSTRUCTIONS

This product is not household waste. Instead it shall be handed over to the applicable collection point for the recycling of electronic equipment. To prevent possible harm to the environment or human health from uncontrolled waste disposal, dispose of rechargeable battery or defective device at special collection points or return them to your specialist dealer or ask your local authorities about recycling of electronic equipment.

Warning

Do not disassemble the power bank or accessories.
Do not modify, disassemble, open, puncture, or otherwise tamper with the inside of the battery.
Protect from fire and long-term direct sunlight to prevent overheating and damage to the power bank.
Protect against high voltage equipment.
Do not throw or shake the backup power source.
This appliance is not intended for use by persons (including children) with physical, sensory or mental disabilities, or lack of experience and knowledge. prevents the safe use of the device.
Do not use chemical cleaners, etc.

Stop using this device immediately if the power bank is damaged in any way. Keep out of reach of children! Ignoring the above safety instructions may result in fire, electric shock, or damage to digital equipment.

COMPATIBILITY

MacBook,
MacBook pro,
laptops,
digital camera,
Projector,
psp,
wireless router,
tablet PCs,
cell phones, etc.

Powerbank

This product have six adjustable voltage and can charge digital divices for 5V, 8.4V, 9V, 12V, 16V (compatible 16.5V),20V (Comparable 19V.19.5V).
When charging for laptops, first, you press the bottom for two seconds to start up, then you double click on the bottom to adjust the voltage to what laptops need and it can start charging. (Attenton: you must adjust its voltage to the laptop’ voltage first).
USB1, USB2 outports can charge digital devices with 5V, 9V, 12V, and support quick charge.
TYPE-C output charges 5V digital devices with TYPE-C input.(support charge USB-C MacBook and Macbook Pro)
All outputs of this product like DC-OUT, USB1, USB2, TYPE-C can charge several devices like laptop, tablet, cell phone simultaneously.
Charge for the 25000mAh Power Bank Connect the charger with the DC input port, the other side connect to the adapter. The digital screen showing 100% means it is full charged.
Charge for your USB devices
Press the button for 2 seconds to start up, connect the USB cable with output port.it will start charging your devices. The digital screen will light up and show the number of remaining capacity.
Charge for your TYPE-C devices
Press the button for 2 seconds to start up.connect the TYPE-C cable with the TYPE-C output port.it will start charging your devices The digital screen will light up and show the number of remaining capacity.
Charge for your laptops
Press the button for 2 seconds to start up.firstly, you need to confirm the device’s charge voltage value, secondly.you change voltage value of this product same to your devices, finally, find your device’s adapter, connect the DC cable with DC output port and your device, then it’s ready to charge,the digital screen show the voltage of your device and the number of remaining capacity.
Battery capacity indicator
Press the button for 2 seconds, the screen will light up to show the voltage and the number of remaining capacity. lf the digital screen does not light up by press the button for 2 seconds, the power bank need to be charged.

“Pass-through” FUNCTION

The power bank has a “pass-through” function, which allows you to charge the power bank from the mains and at the same time the power bank can charge other electronic devices. Activating the “pass-throught” function:

Press and hold the ON / OFF button under the 5V output voltage appears on the display and the USB-A and USB-C ports are ready to charge the other electronics.
Press the ON / OFF button twice to set the output voltage for the JACK (DC-OUT) type connectors and after settng the voltage you can start charging eg your laptop and power bank can be further charged from the mains.

Notice

It is common for the body of the backup power supply to heat up during charging and gradually lower its temperature to room temperature when charging is complete.
If you do not use the device for more than 60 days, store it charged to 75% capacity. This will prevent damage to the battery.
Do not use the backup power source in places with high humidity, temperature and extreme conditions.
Do not leave the power bank discharged for a long time. This will prevent damage to the battery.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation si subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference revived, including interference that may cause undesired operation.