PROGRESS EK4535PSHIMMERGRN Shimmer Jug Kettle Instruction Manual
- June 6, 2024
- PROGRESS
Table of Contents
EK4535PSHIMMERGRN Shimmer Jug Kettle
Instruction Manual
PROGRESS’ Est. 1931
Please retain instructions for future reference.
Safety Instructions
When using electrical appliances, basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of
the local network before connecting the appliance to the main power supply.
Children aged from 8 years and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge can use this appliance, only
if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the
appliance.
Unless they are older than 8 and supervised, children should not perform
cleaning or user maintenance.
This appliance is not a toy. Keep the appliance and its power supply cord out
of the reach of children.
This appliance contains no user-serviceable parts. If the supply cord, plug or
any part of the appliance is malfunctioning, or if it has been dropped or
damaged, only a qualified electrician should carry out repairs.
Improper repairs may place the user at risk of harm. Keep the appliance and
its power supply cord away from heat or sharp edges that could cause damage.
Keep the power supply cord away from any parts of the appliance that may
become hot during use.
Do not immerse the electrical components of this appliance in water or any
other liquid.
Do not operate the appliance with wet hands, or if any connections are wet.
Do not leave the appliance unattended whilst connected to the main power
supply.
Do not remove the appliance from the mains power supply by pulling the cord;
switch it off and remove the plug by hand.
Do not pull or carry the appliance by its power supply cord.
Do not use the appliance for anything other than its intended use.
Do not use any power supply base unit other than the one provided with this
appliance.
Do not store the appliance in direct sunlight or in high humidity conditions.
Do not move the appliance when it is in use.
Do not fill the appliance above its max. fill mark. Overfilling the appliance
may cause boiling water to be ejected.
Always unplug the appliance after use and allow it to cool fully before any
cleaning or user maintenance/storing away.
Always use the appliance on a stable, heat-resistant surface, at a height that
is comfortable for the user.
Use of an extension cord with the appliance is not recommended. This appliance
should not be operated by means of an external timer or separate remote
control system.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
The heating element will remain hot after use. Exercise caution when using
this appliance, as steam will be emitted from the spout and/or lid, especially
whilst refilling.
** CAUTION: Hot surface — do not touch the hot section or heating
components of the appliance. Always allow the appliance to cool thoroughly
before touching or opening the lid.
WARNING: Boiling water and steam can cause serious injury; exercise
extreme caution when using this appliance. Do not remove the lid while the
kettle is boiling. The appliance will become very hot during use; do not touch
the appliance and always take care when handling it. Misuse of the appliance
could cause injury to the user.
Boil-dry Sensor
The kettle is equipped with a boil-dry sensor. If the kettle is accidentally
turned on whilst empty, the boil-dry sensor will activate causing the power to
switch off. The kettle will then remain inactive and the power switch will not
function for several minutes until the kettle is cool. Do not try to use the
kettle during this time; once it has cooled down, it will resume its normal
function.
Care and Maintenance**
Wipe the kettle and power base with a soft, damp cloth then allow it to dry
thoroughly. Do not immerse the kettle in water or any other liquid. Never use
harsh or abrasive cleaning detergents or scourers to clean the kettle as this
could cause damage. Removing Limescale Limescale can develop over time and may
affect the performance and lifespan of the kettle. It is recommended to
descale the kettle regularly, at least once every three months, especially if
the kettle is used in a hard water area. Frequent descaling will improve the
performance and lifespan of the kettle.
STEP 1: All the kettle to the max. fill mark with cold water.
STEP 2: Add a commercial descaling agent to the kettle, adhering to the
manufacturer’s instructions. It is not recommended to use vinegar to descale
the kettle.
STEP 3: Allow the kettle to boil, switch it off and leave to soak for at least
20 minutes or for the length of time specified on the descaling product.
STEP 4: Empty the kettle and refill to the max. fill mark with clean water.
Boil the kettle once more and pour the water away after it has cooled. The
kettle should now be descaled.
If the kettle switches off before it has boiled or a white deposit is noticed
on the inside of the kettle, it needs to be descaled. Add a commercial
descaling agent to the kettle, adhering to the manufacturer’s instructions. It
is not recommended to use vinegar to descale the kettle.
Description of Parts
- Shimmer Jug Kettle
- Powerbase
- Power switch with indicator light
- Handle
- Min. fill mark (0.6 1.)
- Max. fill mark (1.8 L)
- Water fill gauge
- Spout
- Pull top lid
Instructions for Use
Before First Use
Before using the kettle for the first time, wipe it clean with a soft, damp
cloth and dry thoroughly. Check that the limescale filter Is attached.
NOTE: When using the kettle for the first time, a slight odour may be
emitted. This is normal and will soon subside. Allow for sufficient
ventilation around the kettle. WARNING: The kettle is not suitable for
dishwasher use.
Removing the ‘New Kettle’ Taste Fill the kettle to the max. fill mark and boil
the water, following the instructions in the section entitled ‘Using the
Shimmer Jug Kettle’. If any slight ‘new kettle’ taste or odour remains in the
boiled water, discard this and refill the kettle to three-quarters full. Once
boiled, add two tablespoons of bicarbonate of soda and leave to stand
overnight. Discard the water then re-boil a couple of times to remove any
residue. Using the Shimmer Jug Kettle
STEP 1: Remove the kettle from the power base.
STEP 2: Open the pull-top lid and fill the kettle to the desired water
level, using the water fill gauge as a guide. Replace the lid so it clicks
securely shut and place the kettle back onto the power base.
STEP 3: Plugin and switch on the kettle at the mains power supply and
flip the power switch to the ‘on position until it clicks; it will illuminate
to indicate that it is switched on. Do not touch the body of the kettle during
use.
STEP 4: Once the kettle has boiled, the power switch will automatically
flip back into the off position.
CAUTION: Allow the kettle to cool thoroughly before touching or opening
the pull-top lid.
WARNING: The pull-top lid may spray water if flipped open after boiling —
allow the kettle to cool before opening the pull-top lid.
Storage
The kettle must be cool, clean, and dry before storing it in a cool, dry
place. Never wrap the cord tightly around the kettle; wrap it loosely to avoid
causing damage.
Specifications
Product code: EK4535P
Input: 220-240 V — 50-60 Hz
Output: 3000 W
Connection to the Mains
Please check that the voltage indicated on the product corresponds with your
supply voltage.
Important
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as
follows: The wires in the mains lead are coloured in accordance with the
following code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth )
FOR UK USE ONLY – Plug fitting details (where applicable).
The wire coloured BLUE is the NEUTRAL and must be connected to the
terminal marked N or coloured BLACK. The wire coloured BROWN is the LIVE
wire and must be connected to the terminal marked L or coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with
the letter E or marked .
On no account must either the BROWN or the BLUE wire be connected to the EARTH
terminal ( ).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and
conforming to BS 1362 and be ASTA approved. If in doubt, consult a qualified
electrician who will be pleased to do this for you.
Non-Rewireable Mains
Plug If your appliance is supplied with a non-rewireable plug fitted to the
mains lead and should the fuse need replacing, you must use one that is ASTA
approved (conforming to BS 1362 of the same rating). If in doubt, consult a
qualified electrician who will be pleased to do this for you.
If you need to remove the plug, DISCONNECT IT FROM THE MAINS, then cut it off
the mains lead and immediately dispose of it safely. Never attempt to reuse
the plug or insert it into a socket outlet as there is a danger of an electric
shock.
UP Global Sourcing UK Ltd.,
UK. Manchester OL9 ODD.
Germany. 51149 cabin.
If this product does not reach you in an acceptable condition please contact
our Customer Services Department at
www.progresscookshop.com Please have your
delivery note to hand as details from it will be required. If you wish to
return this product, please return it to the retailer from where it was
purchased with your receipt (subject to their terms and conditions).
Guarantee
All products purchased as new carry a manufacturer’s guarantee; the time
period of the guarantee will vary dependent upon the product. Where reasonable
proof of purchase can be provided, Progress will provide a standard 12-month
guarantee with the retailer from the date of purchase. This is only applicable
when products have been used as instructed for their intended, domestic use.
Any misuse or dismantling of products will invalidate any guarantee. Under the
guarantee, we undertake to repair or replace free of any charge any parts
found to be defective. In the event that we cannot provide an exact
replacement, a similar product will be offered or the cost refunded. Any
damages from daily wear and tear are not covered by this guarantee, nor are
consumables such as plugs, fuses etc. Please note that the above terms and
conditions may be updated from time to time and we, therefore, recommend that
you check these each time you revisit the website. Nothing in this guarantee
or in the instructions relating to this product excludes, restricts or
otherwise affects your statutory rights.
The crossed-out wheelie bin symbol on this item indicates that this appliance
needs to be disposed of in an environmentally friendly way when it becomes of
no further use or has worn out. Contact your local authority for details of
where to take the item for recycling.
PROGRESS’ Est. 1931
*To be eligible for the extended guarantee, go to guarantee.upgs.com/progress/
and register your product within 30 days of purchase. Find us on
www.facebook.com/ProgressCookshop
Manufactured by:
UP Global Sourcing UK Ltd.,
UK. Manchester OL9 ODD.
Germany. 51149 Kohl. MADE IN CHINA.
www.progresscookshop.com
©Progress trademark. All rights reserved.
C0121121/m000191121/vi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>