PROGRESS LIGHTING P350271-31M Rivera Collection 4 Light 13 in Matte Black Luxe Industrial Flush Mount Instruction Manual

: May 15, 2024
: PROGRESS LIGHTING

Table of Contents

PACKAGE CONTENTS
HARDWARE CONTENTS
Safety Information
Preparation
Care and Maintenance
Assembly Instructions
Assembly and Installation Instructions
WARRANTY
Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROGRESS LIGHTING P350271-31M Rivera Collection 4 Light 13 in Matte Black Luxe Industrial Flush Mount

PROGRESS LIGHTING P350271-31M Rivera Collection 4 Light 13 in Matte Black
Luxe Industrial Flush Mount

PACKAGE CONTENTS

PART	DESCRIPTION	QUANTITY
H	Frame	1
L	Glass panel	4
M	Screw	8
N	Round tube	1
P	Canopy	1

Package Contents

HARDWARE CONTENTS

(not actual size)

Screw (#8-32)
Qty:2
Wire Nut
Qty:3
Swivel Mounting Plate
Qty:1
Hex Nut (#8-32)
Qty:2
Cylinder Nut (#8-32)
Qty:2

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product.

CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.

CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.

WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.

CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.

Preparation

or damaged, do not attempt to assemble, install or operate the product. 2. Estimated assembly time: 30 minutes. 3. Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Care and Maintenance

Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

Assembly Instructions

Loosely thread the screws (AA) and the hex nuts (DD) onto the swivel mounting strap (CC). You now need to adjust the screw length according to the fixture canopy depth.
With the swivel bracket facing out, attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.

Lift up the fixture to the mounting surface and pass the screws (AA) through the two mounting holes in the fixture canopy. While holding the fixture with one hand, thread the screws (AA) in or out of the swivel mounting strap (CC) until 3/16″ of threads are showing. That should be enough to mount the fixture as instructed in step 7.
Next, take the fixture down and go back and tighten the hex nuts (DD) up against the swivel mounting strap (CC). You now should have the correct length of threads for mounting the fixture.
Attach the glass panels (L) to the frame (H), by aligning the two holies in the glass panels (C) with the holes in the frame (H). Use the screws (M) to secure tightly.
Pass the wires through the round tube (N), nipple of canopy (P) and out the back of canopy. Attach the round tube (N) onto the hex coupling of fixture (A), using the nipple of canopy (P) to secure tightly.
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire from the outlet box.
Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the swivel mounting plate. Push all of the wire connections carefully into the outlet box.
Pass the screws (AA) through the two holes in the canopy (P). Secure the fixture to the screws (AA) using the two cylinder nuts (EE) provided. Tighten securely in place.
Thread the lamps (not included) into the fixture sockets. Use 60-watt MAX incandescent candelabra base lamp, SBCFL or SBLED.

Assembly and Installation Instructions

Caution: Read instructions carefully and turn off power at central circuit breaker before beginning installation.

CAUTION: Read instructions carefully and turn off power at central circuit breaker before beginning installation.

WARNING: Risk of fire. Min 90°C power conductors. Consult a qualified electrician to ensure the correct branch circuit conductor.

WARNING – If there are other regulating mechanisms used with this device, carefully follow the instructions to meet NEC requirements. If you have any questions, consult a qualified electrician.

CAUTION – Glass is always fragile; Handle the component(s) and/or bulb(s) with care.

WARRANTY

WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly installed and under normal conditions of use, are warranted to our customers only to be free from defects in material and workmanship at time of shipment. All warranty claims must be asserted within one year from date of purchase of the subject items; thereafter, warranty claims will not be honored. Customers’ sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at time of shipment. Progress’s sole and maximum liability for a defective product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers. Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of our products for customer’s use or resale, or for incorporating them into objects or for applications which customer designs, assembles, constructs or manufactures.