DEFIANT HPPA51CWB Outdoor Smart Plug User Guide
- June 6, 2024
- DEFIANT
Table of Contents
DEFIANT HPPA51CWB Outdoor Smart Plug
THANK YOU
We appreciate the trust and confidence you have placed in Defiant through the
purchase of this Smart Plug. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Defiant!
Safety Information
WARNING:
- SUITABLE FOR OUTDOOR AND DAMP LOCATIONS.
- DO NOT IMMERSE IN WATER. INSTALL ABOVE GROUND LEVEL
- AT MIN 4.7FT/1.4m WITH RECEPTACLE POINTED DOWN WHEN
OUTDOOR.
The total current limit of the device is 15 Amp. To avoid damage, do not
exceed the 15 Amps limit. If a direct short is created on the output, the
Smart Plug will be damaged and no longer function. Do not disassemble the
product or make repairs yourself. You run the risk of electric shock and
voiding the limited warranty. If you need service, please contact Customer
Support.
Make sure to use this product together with 15A circuit breaker in the upstream.
FCC Regulation
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Responsible Party
Leedarson America, Inc. 300 Technology Court SE Suite 100; Smyrna,
GA 30082 1-678-293-8382
Unique Identifier:
HPPA51CWB (SKU # 1006 355 005)
Contains FCC ID: 2AB2Q-LA02301
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and any part of your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
caution:
The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could
void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected
- Consult the dealer or an experienced radio/TV technician for help
Wireless Protocol
The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google and Google Play are trademarks of Google LLC.
Warranty
1 YEAR LIMITED WARRANTY
This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. Guarantee does not include normal wear and tear.
Package Contents
Installation
Operation
-
Download the Hubspace™ app from the App Store or the Google Play Store.
-
have an account. Create an account to sign in or log in if you already
-
.Connect your plug to power and follow the instructions on the app screen
NOTE:
* This Hubspace device requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks that your device can use.
* If you do not see your Wi-Fi network name when you attempt to connect your devices, please check your router settings or move your product closer to your Wi-Fi router.
- Tap the ‘+’ button in the upper right corner to add your Plug
NOTE: Bluetooth access is required for device setup.
- Scan the QR code on the plug or in the Quick Start Guide.
NOTE: If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
- Using your Outdoor Smart Plug
- Turn your Smart Plug on or off from the Home page on the Hubspace app.
- To set a schedule or timer, tap the name of the smart plug on the Home page. You will see options for setting Schedules and Auto-Off Timers.
- Set up your Voice Assistant
You can connect your smart plug to Google Home and Alexa from the Hubspace app. Or, you can sign in to Alexa app or Google Home and connect to your Hubspace devices from there.
Specification
LED Indicator
LED
State
| Plug State| Meaning| Action To Take
---|---|---|---
Orange Quick Blink| Off| ****
Wi-Fi is not connected.
| Set up Wi-Fi for the product. If you have already set up Wi-Fi for this
product, wait for it to connect. Check the Hubspace app for connectivity
status.
Orange/Green Quick Blink| ****
On
Off| Off| The plug is off.| ****
No action required.
Green| On| The plug is on.
Red| Off| There is a WiFi error.| Go to the device settings in the app and set
up WiFi again. Check that your WiFi Access Point is allowing the device to
join the network.
Orange| On
Input| 120VAC, 60Hz
---|---
Output| 120VAC, 60Hz,15A Maximum load, Resistive
Network Wireless Type| 2.4GHz, IEEE 802.11b/g/n
Operating Temperrture| -22°F – 113°F
Operating Humidity| 5-85% RH, Non-condensing
Certification| FCC, ETL
Troubleshooting
Problem | Solution |
---|---|
What devices can be controlled with the Smart Plug? | You can control any small |
appliances (less than max load 1800W) in accordance
My Hubspace device is not connecting to Wi-Fi.| Make sure your device is
connected to a power source. Your Internet connection or Wi-Fi network may be
down.
My device cannot nd any Wi-Fi networks.| Make sure you have a 2.4GHz capable
Wi-Fi network within range of the device you are trying to add.
My device is in a location that does not have Wi-Fi. Can I still use it with
the Hubspace app?| Yes. Use the app on a phone with an Internet connection
like LTE. The phone must be within Bluetooth range of your Hubspace device and
have Bluetooth enabled.
I cannot nd the QR code.| It is on the plug housing. A copy of the QR code is
also included in your device’s documentation.
The QR code has become damaged. How do I add the device?| Under the QR code
are numbers. You can enter those in manually instead of scanning the code.
I lost my QR code. How do I add a device?
| 1. Make sure the device is connected to power.
2. In the Hubspace app, tap +, then Add Device.
3. On the Scan Device screen, tap the Search button in the lower right corner.
4. Follow the instructions on-screen.
Problem | Solution |
---|---|
A device is on another account. How do I transfer it? | Scan the QR code and it |
will transfer to your account.
My device is of ine for long periods of time.| Make sure your Wi-Fi signal
strength is suf cient. You may need to move your
router, use mesh Wi-Fi, or Wi-Fi extenders.
The device is on and I scanned the QR code, but the app cannot connect to it.|
Turn off Bluetooth on your phone and turn it back on. Then, scan the QR code.
If the problem persists, turn your phone off and on, then try again.
Can I scan the same QR code to add multiple products?| No. Each product has a
unique QR code.
Questions, problems, missing parts? Before returning to the store, call
Hubspace Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-592-5233
HOMEDEPOT.COM/Hubspace
Retain this manual for future use.
Documents / Resources
|
DEFIANT HPPA51CWB Outdoor Smart
Plug
[pdf] User Guide
HPPA51CWB, Outdoor Smart Plug
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>