SANNWSG 10x20FT Heavy Duty Canopy Carport Tent Instruction Manual
- September 20, 2024
- SANNWSG
Table of Contents
SANNWSG 10x20FT Heavy Duty Canopy Carport Tent
Product Specifications
- Dimensions: 10x20FT
- Manufacturer: Sannwsg Outdoor Products Ltd.
- Materials: Steel frame, Canopy fabric
- Includes: Canopy, Steel frame components, Bolts, Stakes, Wrench, Tension rope, Sand bags, Solar Lamp
Product Usage Instructions
- Lay out the Crossbeam (C), Tee-junction (E), and Cross fittings (F) as per the diagram. Connect them sequentially.
- Slide the Slant beams (D) into the assembly crossbeam and connect Tubes (G) using Bolts (M).
- Place the Canopy (H) over the assembled frame.
- Attach the Base (B) to the Post (A) using Bolts (M). Install Extended tubes (U) or (V) based on requirements.
- Insert the Posts into Tee-junctions (E) and Cross fittings (F).
- Fix the Canopy (H) to Crossbeam (C) with Elastic cord (K).
- Attach Sandbags (S) and secure the tent to the ground.
- Use cords (L) and Stakes (O) to secure the tent to the ground.
- Additionally, use Tension rope (R) and Stakes for further anchoring.
FAQ
- Q: How do I dismantle the tent?
- A: To dismantle the tent, follow the assembly steps in reverse order. Remove all connections and store the components properly.
- Q: Can I leave the tent assembled during harsh weather conditions?
- A: It is recommended to disassemble the tent during extreme weather like strong winds or heavy rain to prevent damage.
Outdoor Carport Tent Manual
Dear Customer,
Thank you for choosing our product! To ensure your safety and the proper usage
of the product,please adhere to the following crucial recommendations during
installation and use:
- Secure the product using sandbags: To enhance the stability and safety of the product, it is imperative to use sandbags during installation. Sandbags effectively prevent unintended movement or tilting of the product, providing additional support and stability.
- Avoid installing near or directly on air vents: Air vents can cause airflow variations that may adversely affect the normal operation of the product. Choose a location away from air vents to ensure the product’s
stability under various environmental conditions.
Our objective is to provide you with the highest quality and safest product
experience. If you have any questions regarding installation or usage, please
feel free to contact our customer service team.
Once again, thank you for choosing our product, and we wish you a delightful
user experience!
Assembly Diagram
PARTS
Installation Instructions
Step 1
- Lay out the Crossbeam（C), Tee-junction （E), and Cross fittings（F）based on the position shown in the fig, then have them connected one by one.
Step 2
- Slide the Slant beam (D) into the assembly crossbeam in the first step， then connect the Tube (G) to the Slant beam (D) by using Bolts (M).
Step 3
- Cover the Canopy (H) over the assembled frame.
Step 4
- Connect the Base (B) to the Post (A) by using Bolts (M).
- Install the Extended tube (U) or (V) or install both at the same time based on needs in this step.
Step 5
- Slide the Post into the Tee-junction (E) and Cross fittings (F).
Step 6
- Fix the Canopy (H) onto the Crossbeam (C) with an Elastic cord (K).
- Attach the Sandbag (S)with the Post (A) to secure the canopy.
- Secure the whole tent onto the ground with the Stake (N) .
Step 7
- Secure the whole tent onto the ground with the cord (L) and the Stake (O).
- Secure the whole tent onto the ground with the Tension rope (R) and the Stake (O).
CONTACT
10x20FT Carport Tent Sannwsg Outdoor Products Ltd.
- Street: 8 The Green Suite A
- City: Dover
- State: DE
- Post code:19901
- phone:6605538327
- Email:mail@sannwsg.com
- Scan the code on your phone and
- contact us via email
After-sales phone service hours:
- US Central Time: 19:00-23:00
- Seattle time: 17:00-21:00
- US Eastern Time: 20:00-00:00
- Toronto time: 20:00-00:00
- Germany time: 8:00-11:00
- After-sales mailbox service time: 7*24 hours
- sannwsg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>