TEKYGO A453 Smart Box Instruction Manual

TEKYGO A453 Smart Box

Thank you for purchasing TEKYGO! Portal. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your product properly and safely. It is intended for the owner and/or personnel in charge of product operation. Carefully read and understand the instructions.

IMPORTANT SAFETY INSTRUCTIONS

This product is an indoor product. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury, and/or machine malfunctioning:

• Places subject to rain/moisture, or places subject to high humidity.
• Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to ensure that it is used within the specified operating range.
• Places where inflammable gas may be present or in the vicinity of highly inflammable/volatile chemicals or items that can easily catch fire.
• On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
• Vicinity of fire exits, fire extinguishers, etc that may block/prevent safety measures.

IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS. FAILURE TO DO SO VOID ALL WARRANTIES AND THE OPERATOR ASSUMES ALL RISKS.

CONTENTS OF THE ACCESSORY KIT

Open the package and make sure all the items are included Following accessories

SPECIFICATIONS

• Rated Power Supply: DC12V, 3A;
• Max. Power consumption: 36W
• Sensor Dimension: W2.32D2.12H0.90 in (W59D54H23 mm)
• Digital Box Dimension: W5.51D4.09H1.65 in (W140D104H42 mm)

DIGITAL BOX INTRODUCTION

Digital Box Back Side Instruction:

Digital Box Side Instruction:

SET UP & INSTALLATION

1. Place Trampoline in front of the TV.
2. Place Digital box under the TV. Utilize Serial cable to connect Sensor and Digital box.
3. Utilize H Cable to connect TV and Digital box. Connect Adapter to the Digital box and Power socket.
4. Power on. Utilize TV remote control to select HDMI version and open.
5. Place Sensor under the trampoline. Utilize TekyGo remote control to select game and play.

REMOTE CONTROL INSTRUCTION

• Power: Turn the game on and off.
• Arrow: Used for on-screen navigation(up,down, left and right).
• Select: Confirms selection or action.
• Home:(This feature is not yet available.)
• Menu: (This feature is not yet available.)
• Return: Exit or turn back.
• Vol +/-: Vol + increases the volume; Vol – decreases the volume.

HOW TO PLAY

1. Power on.
2. Select a game to play.

Game Lobby Instructions

How to Connect Network:
Method 1: For First Settings Please follow the Game screen to set up the box(Including connect network).
Method 2: Connect Network Manually Select “Settings”-“General”-“Network”. Choose “WLAN” or “Ethernet” according to your need.

How to Download New Games:

Note: Before processing the following steps, please refer to “How to Connect Network”.
Select “Game”- “Library”; Select the game you want to download. Select “Install” to download and play.

How to Uninstall Games:

Select “Settings”–“Data Management”-“Manage Software”. Select the game you want to uninstall.

How to Update Game Lobby Manually
Select “Settings”-“System Update”. The game lobby would update automatically.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>