DEGuard KKEDH-SN-SC1 Electronic Keypad Keyed Deadbolt Installation Guide
- June 6, 2024
- DEGuard
Table of Contents
- PROGRAMMING
- Change Master Code
- Add User Code(s)
- Delete Individual User or Single-entry Code(s)
- Delete all User/ Single-entry Codes
- Add Single-Entry Code(s)
- Vacation Mode
- Enable or Disable Beeper
- Auto-lock Function
- Auto-lock Delay Timer
- Restore to Factory Settings
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DEGuard KKEDH-SN-SC1 Electronic Keypad Keyed Deadbolt Installation Guide
Package Contents List
Hardware Contents (Actual Size)
Safety Information
Before Proceeding
Tools Required
Step 1: Door Drilling For New Installation
Step 2: Install the latch and strike
Step 3: Install Electronic Deadbolt
Step 4: Test Lock
Step 5: Program Lock
TEMPLATE
NOTE: Double check your product for the correct hole sizes.
USER GUIDE
PROGRAMMING
OVERVIEW OF FUNCTIONS
- Programming mode will automatically time out after 30 seconds of inactivity.
- If you make a mistake during programming, press the SET BUTTON to leave Programming Mode and start over.
Change Master Code
Add User Code(s)
Delete Individual User or Single-entry Code(s)
Delete all User/ Single-entry Codes
Add Single-Entry Code(s)
Vacation Mode
Enable or Disable Beeper
Auto-lock Function
Auto-lock Delay Timer
Restore to Factory Settings
Access Code List
TROUBLESHOOTING
Contents in this package are NOT interchangeable with other units. Please contact customer service for more information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>