Baseus BS-W501 Cobble Wireless Charger User Manual
- June 6, 2024
- Baseus
Table of Contents
Baseus BS-W501 Cobble Wireless Charger User Manual
Please read this instructions completely and keep it properly
Product Introduction
Thanks for your choosing our wireless charger, this wireless charger support quick charging; Before you use this product. Please read this manual carefully and save it.
Specification
Brand: Baseus
Model: BS-W501
Name: Baseus Cobble Wireless Charger
Material: PC+Silicone
Color. Black/ White
Interface: Type-C input
Input Current: DC 51/.1A 9V-2A 12V-2A (Max.)
(It is recommended to use the QC3.0 adapter with power of 18W or above. )
Compatibility: Supports Qi-compliant wireless charging devices Product Size:
160.0mm*80.0mm’T.3mm
Product Weight: 130.3g (without packaging)
Package List
Wireless Charger ‘1
User Manual ‘1
Warranty card ‘1
Charging Cable ‘1
Instruction
-
After the product is inserted into the adapter, the indicator lights will be on.
-
Charging mode: Orange light breath.
-
Point your phone at the center of the wireless charger, and the wireless charger starts working. If it cannot work properly, please adjust the position of the mobile phone until the mobile phone displays normal charging (please refer to the following figure for placement)
-
FOD: light flicker.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
Part
Description| Toxic or hazardous substances and elements
---|---
Lead
(Pb)| Mercury
( Hg)| Cadmium
( Cd)| Hexavalent
chromium
(Cr VI))| Polybrominated
biphenyls
(PBB )| Polybrominated
diphenyl ethers
(PBDE)
PCB| X| | O| O| O| O
Casing| O| O| O| O| O| O
Accessory| O| O| O| O| O| O
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in
all homogeneous materials of the component is below the limit specified in
GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one
homogeneous material of this part exceeds the limit stipulated in GB/T 26572
standard. This product complies with EU RoHS 2.0 Drective (2011/65/EU)
Caution
- To achieve best performance of this wireless charger, or 9V-r2A , 12V-24 adapter is suggested to adapted.
- In the process of charging, do not put any metal materials like key, ring, metallic phone case etc. on the back of phone device or wireless charger directly.
- It may occur occasional intermittent charging or serious heating due to the unjustified position of phone receiver coil and wireless charging, please try to cold your phone, then move your phone to carryout the alignment.
- This product has over current /voltage protection, it will be shut off or reduce output if used in incorrect way, Please check whether your device is abnormal or not.
- Please use this product under temperature of 0-25°c, DO NOT Expose the product to water, fire, or overheated and lower temperature environment, the product will be unavailable, Do not let children to touch accessories.
- Please use dry, clean soft cloth to clear product surface, DO NOT use chemistry material and soap to clean.
- Manufacturer will not be responsible for those defects which caused by users, Please kindly understand.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive
Standard: Q/SSCZ 021-2020
Hotline: +86-4000-712-711 Website: www.baseus.com
Copyright©2010-2021 Shenzhen Times Innovation Technology Co. ,Ltd.
All Rights Reserved
The ‘QC symbol is a trademark of the Wireless Power Consortium
PB2256Z Designed by Baseus . Made in China
