Homealexa Cute Pear Digital Alarm Clock User Manual

: June 16, 2024
: Homealexa

Table of Contents

Homealexa Cute Pear Digital Alarm Clock

Overview

Accessories

Pear wake -up clock : 1pcs •User manual: 1 pcs
Typer -c charging cable: 1pcs •Greeting card: 1 copy: 1pcs

Display &Indicator

Alarm 1/2/3: Alarm Turn on/off alarm 1/2/3 and corrosponding indicators will be on/off. Indicators will flicker when ringing.

Snooze

Snooze : Enter/quit the snooze mode and corresponding indicators will be on/off.

Battery

Charging & low battery

Charging state
Volume Adjust volume

Expression

This expression will show on the hour.
This expression will show at half.

Week

The corresponding day will show automatically Mon Tues Wed Thur Fri Sat Sun
AM === AM indicator will be on in the morning under the 12- hour system.
PM === PM indicator will be on in the afternoon under the 12h-hour system.

Product Activation

Pear Wake-up Clock User Manual

Connect to the DC5V power supply that conforms to 3C. authentication to activate product (Activation is only necessary after shutting down. The_ product is permanently effective after first activation. Re-activation is only necessary after shutting down).

Manual setting

Setting time :
- Not in setting mode -—Click this button to select “tell time” mode, press “+””'” button and select b00/b01/b02.
- b00: Disable “tell time” function,
- b01: All-day”tell time”
- b02: Disable “tell time”at night (20:00-05:59 of next day)
Not in setting mode —- Press and hold this button for 3s to enter setting, set “Year →month-day→week →12/24h time system-time-min→button tone on/off”, press (+ -) to select (PR-button tone off/PR ON: button tone on): after setting is done, click this button to quitsetting, or it will automat ically return to time display in 5s if there is no further operation. Press (+ -) to adjust or select during setting
In 12h time system, AM indicator will be on in the morning, PM indicator in the afternoon.

Setting/alarm/snooze mode

Not in setting mode —Press and hold the clock button for 3S to start setting: Ringtone 1 time flicker —Ringtone 1 min flicker→ Ringtone 1 mode selection (Select 1-5 1-6 1-7 ringing time), press (+ -) to adjust or select during setting. Setting of Ringtone 2/3 is the same as Ringtone 1 Click any button twice to quit the ringing function
Non-set state — C1ick the ring button as follows: In Ringtone 1, press “*”'”to turn ON/OFF Ringtone 1. Time will be on display during ringing, or display OF when ring is off

In Ringtone 2, press “’”to turn ON/OFF Ringtone 2 Time will be on display during ringing, or display OF when ring is off
In Ringtone 3, press. “+” “”to turn ON/OFF Ring3. Time will be on display during ringing, or display Of when ring is off

Snooze

During ringing, click any button to enable snooze will be on : when panel lights. up. for 5min, the alarm will ring again press any button to disable the alarm again and enter snooze mode. After ringing for 3min, the clock will quit the snoze mode and the will be shown on the panel. Quit snooze: The clock will quit snooze mode automatically after 3 rounds of snoozing/ quit snooze manually

Adjust ring/display brightness

In setting mode, press this button once to increase the display figure by 1, or press and hold to increase the display figure continuously
Then not in setting mode, short press to increase volume3. Then not in setting mode, press and hold this button for 35, select brightness, press “+” “” to switch between 1ow, medium and high brightness.

Adjust ring/display brightness

In setting mode, press this button once to decrease the display figure by 1, or press and hold to decrease the fi gure continuously
Then not in setting mode, press to lower volume.

Enable/disable countdown

Enable countdown: Press this button when not in setting mode . until it peeps, the panel will display. the default time 30:00 and start countdown: press (+—*). to. adjust time within 1-60: the countdown will start automatically if there is no further operation in 3S. Di sable countdown: Countdown will quit automatically when it is finished, or press this button to quit countdown.

Select ringtone

Press this button to select the ringtone:; press again to play the next ringtone (6 in total).

Charging/ low battery reminder

charging grids will blink from the left to the right: Left→ Left and. middle→Left, middle and right: LED of fully-charged grid will be stay on and stop blinking Low battery: The battery level frame will flicker, and charging interface that conforms to 3C authentication for charging. interface that conforms to 3C authentication for charging.

Charging diagram

Normal mode : Powered by external USB power supply: display panel and corresponding DP modes of expression will remain . on (normal mode).
Eco mode : When the clock is powered only by lithium battery, the display panel will be on for 20s and then switch itself off automatically (eco mode) when there is sound around the product.

6 Reset

Press reset to shut down the product, enter deep sleep mode and stop working. The product will not be activated until sound around the product.

Precautions

Never put the product in fire to avoid explosion
The product is not a toy for children! It is only suitable for children above 6 years.
The product is not waterproof! Do not clean it with water.
The display of the product. is not replaceable. The whole product should be replaced when light source reaches its end.
Please put the product on a stable surface to avoid tilting!

Warning : Never dismantle, collide, squeeze nor throw the battery into fire. Stop using in case of severe swelling. Do not expose the battery to high- temperature!