LD Systems LDCURV500I Managing Software User Manual
- June 6, 2024
- LD Systems
Table of Contents
LDCURV500I Managing Software
User Manual
INTRODUCTION
The LD CURV 500 I AMP software is used to update the device firmware, load current loudspeaker presets, manage individual global presets in 16 memory locations, and reset the PIN to factory setting if necessary. The software is compatible with Windows operating systems 7, 8, and 10 and requires a USB interface (version 2.0) for data connection.
INSTALLATION AND CONNECTION
Download the software package from the product page at WWW.LD-SYSTEMS.COM, unzip the file, and first of all install the USB driver CDM 2_xx_xx on your Windows PC. Connect the USB port of the CURV 500 I AMP to the USB port of your computer using a suitable USB cable (USB 2.0, USB-A to USB-B) and switch on the CURV 500 I AMP (driver installation may take a few moments). Start the Device Manager on your computer and check the COM port number of the “Prolific USB-to-serial comm port” under “Ports (COM & LPT)” (in the example, COM6). Now start the software “LD SYSTEMS DSP UPDATER” (double-click on the software icon). Ensure that baud is set at 57600. If necessary, select the com port number previously checked in Device Manager under “COM Port” and click on “Connect”. The display field “Status” will change color to green and you can check the correct connection by clicking on the “Test USB” button (USB connection OK). To terminate the connection, click on “Disconnect”.
UPDATE FIRMWARE/SPEAKER PRESETS
Current firmware and loudspeaker preset can be found together in an update
file in the download area of the product at WWW.LD-SYSTEMS.COM.
Make sure you follow the instructions exactly during the update process!
Otherwise, the amplifier’s device software may be damaged and the amplifier
made unusable. If this occurs, the device must be taken to an authorized
service center and carefully restored (not covered under warranty!).
Download the latest file, save it to your computer and unzip it. Switch on the
CURV 500 I AMP, connect it to your computer, and start the software as
described in INSTALLATION AND CONNECTION. Now click on “Firmware” and then on
the button “Browse for update file”. Select the previously saved update file
in the appropriate folder and click on “Start programming”. The progress of
the update process will now be displayed as a percentage and once the process
is complete, the CURV 500 I AMP will restart automatically. Wait until the
main display is shown on the amplifier display, then switch it off, wait 2
minutes, and then switch the amplifier on again. When the main display
reappears, the update process is completed and the amplifier is ready for
operation.
RESET PIN TO FACTORY SETTINGS
If the PIN for unlocking the amplifier becomes lost, the software can be used to reset it to factory setting 1234. Connect the CURV 500 I AMP with your computer and start the software as described in INSTALLATION AND CONNECTION. Now click on “Set default PIN: (1234)”. As confirmation of the process, a window with the information “PIN reset OK!” will open. Click on “OK” to close the window. The amplifier can now be unlocked using PIN 1234.
MANAGE GLOBAL PRESETS
Individual settings for the menu items speaker preset, channel volume, delay, routing, equalizer, etc. can be saved internally in global presets and accessed from 16 memory slots. Using the CURV 500 I AMP software, these global presets can be stored separately or together on a PC and uploaded onto the amplifier again. Connect the CURV 500 I AMP to your computer and start the software as described in INSTALLATION AND CONNECTION. Click on “Manage global presets” to open the window to manage the global presets.
List of global presets (List of global presets)
The list of global presets displays all the global presets in the CURV 500 I
AMP’s 16 memory slots by name (DEFAULT = Not assigned / factory setting).
Rename global preset (Rename)
Double-click on the desired preset to open the window to rename it. Assign the
desired name to it (maximum 9 digits) and confirm the entry by clicking on
OK. The new preset name is also displayed on the device’s display as soon as
one of the menu items “SAVE GLOBAL PRESET” or “LOAD GLOBAL PRESET” is
selected.
Save all global presets in a file on the computer (save global presets as
files)
To save all global presets in a file on the computer, click on the button
“Save Global Presets as File”. The data of all global presets will now be
collected, the progress is displayed as a percentage and, as soon as the
process is completed, the window “Save Global Presets as File” will open.
Click on “Yes”, select a storage location on your computer, name the file as
required and save it.
Load all global presets in a file onto the device (Upload Global Presets to
Device)
To load all global presets in a file onto the CURV 500 I AMP, click on the
button “Upload all Global Presets to Device”. In the next window, “Upload a
global preset file to device”, click on “Yes”, select the desired file on your
computer and click on “Open”. The progress of the upload process will now be
displayed as a percentage and, as soon as the process is completed, the global
presets just loaded will appear in the window “List of Global Presets”.
Save a single global preset on the computer (Create Single Global Preset
File)
To save a single global preset as a file on the computer, select the desired
preset by highlighting it in the list of global presets (1 click), and then
click on the button “Create Single Global Preset File”. The data of the single
global preset will now be collected and, as soon as the process is completed,
the window “Save Preset as File” will open. Click on “Yes”, select a storage
location on your computer, name the file as required and save it.
Load a single global preset onto the device (Upload Single Global Preset
File to Device)
To load a single global preset onto the CURV 500 I AMP, highlight the required
memory slot in the list of global presets (1 click) and click on the button
“Upload Selected Global Preset File”. In the next window, “Upload Single
Global Preset to Device”, click on “Yes”, select the desired file on your
computer and click on “Open”. The progress of the upload process will now be
displayed as a percentage and, as soon as the process is completed, the global
preset just loaded will appear in the window “List of Global Presets”.
Reset global preset to factory setting (Reset Global Preset)
To restore a global preset in the CURV 500 I AMP to its factory setting,
select the desired preset in the window “List of Global Presets” by
highlighting it (1 click) and then clicking on the button “Reset Global
Preset”. Once the process is complete, the original preset name will be
replaced by “DEFAULT”.
SERVICE FUNCTION
Service function (Service only)
This function is solely intended for servicing purposes and is password-
protected. For use only by trained service personnel!
REV: 02
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 |adamhall.com
References
- Eventtechnik Lösungen | Adam Hall Group
- LD Systems® | Your Sound. Our Mission.
- LD Systems® | Your Sound. Our Mission.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>