LD systems LD DQOR PB Pole Mount Bracket Instruction Manual
- October 30, 2023
- LD systems LD
Table of Contents
LD systems LD DQOR PB Pole Mount Bracket
This pole mount bracket is designed for mounting DQOR speakers on cylindrical objects (poles, trusses, etc.). The black bracket is made of solid stainless steel and is supplied with 2 stainless steel band clamps for secure mounting. Alternatively, it can be mounted with two screws (not included). The holes in the bracket are compatible with the Wall Mounting Brackets CURV500 WMB(W) and LDSATWMB10(W/B), SUWMB10(W/B).
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material. Please check that the delivery is complete and intact and inform your sales partner immediately after purchase if the delivery is incomplete or damaged. Included in the packaging content are:
- 1x Pole mount bracket
- 2x Band clamp
- Assembly instructions
DESCRIPTION
This pole mount bracket is designed for mounting DQOR speakers on cylindrical objects (poles, trusses, etc.). The black bracket is made of solid stainless steel and is supplied with 2 stainless steel band clamps for secure mounting. Alternatively, it can be mounted with two screws (not included). The holes in the bracket are compatible with the Wall Mounting Brackets CURV500 WMB(W) and LDSATWMB10(W/B), SUWMB10(W/B) .
SAFETY INFORMATION
- Please read these instructions carefully before you start installation and assembly.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Only use the accessories in the manner intended.
DANGER: KEEP AWAY FROM CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AND PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF REACH OF CHILDREN!
PRODUCT INFORMATION
This item is a product-specific accessory intended exclusively for use with
the LD Systems DQOR installation speaker. These installation instructions do
not replace the operating instructions for the associated product. Always read
the relevant operating instructions first. These accessories have no influence
on the intended use of the associated product.Observe the safety instructions
from the operating instructions of the associated product! The technical data
stated in the operating instructions may change in connection with this
accessory.
FEATURES
- Includes 2 stainless steel band clamps with 800 mm length.
- Ready for a wide range of pole dimensions (35 – 290 mm).
- Mounting option with screws for small diameter poles.
- Compatible with DQOR wall mount, CURV500 WMB and SAT WMB10.
POLE MOUNT BRACKET
BAND CLAMPS
- Insert the band clamps into the respective slots on the side of the metal plate of the pole bracket.
- Tighten the band clamp screws firmly until the clamp is fully secured in place and doesn’t move.
- A. mounting holes for DQOR wall bracket,
B. additional holes if the metal plate has been mounted upside down.
M8 SCREWS
- Recommended drill bit for M8 screws: 8.5 – 9 mm
- REQUIRED ACCESSORIES – NOT INCLUDED:
- A 2 x Long M8 screw with Flat head
- B 2 x Plastic washer
- C 2 x Metal washer
- D 2 x Nylon insert locknut (nylock)
- Mounting holes for CURV500 WMB(W), LDSATWMB10(W/B), SUWMB10(W/B).
SPECIFICATIONS
MANUFACTURER’S DECLARATIONS
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach E-Mail [email protected]
/ +49 (0)6081 / 9419-0. Our current warranty conditions and limitation of
liability can be found at: https://cdn-shop.adamhall.com/media/pdf
/MANUFACTURERS-DECLARATIONS_LD_SYSTEMS.pdf In case of service, please contact
your sales partner.
DISPOSAL
Packing:
- Packaging can be fed into the recycling system via the usual disposal channels.
- Please separate the packaging according to the disposal laws and recycling regulations in your country.
Product:
Dispose of the product in accordance with the disposal regulations in force in
your country. Misprints and errors, as well as technical or other changes are
reserved!
LD Systems® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany | Phone:
+49 6081 9419-0 | adamhall.com