LD SYSTEMS MAILA EasyMount+ Bracket Instruction Manual
- October 30, 2023
- LD Systems
Table of Contents
**LD SYSTEMS MAILA EasyMount+ Bracket Instruction Manual
**
SAFETY INFORMATION
- Please read these instructions carefully before you start installation and assembly.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Only use the accessories in the manner intended.
- Do not change the flight bracket.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS.
THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
PRODUCT INFORMATION
This item is a product-specific system component intended exclusively for use
with the LD MAILA COL speaker column and the LD MAILA SPA amplifier module.
These installation instructions do not replace the operating instructions for
the associated products.
Always read the relevant operating instructions first.
These accessories have no influence on the intended use of the associated
product.
Observe the safety instructions from the operating instructions of the
associated product! The technical data shown in the operating instructions may
change in connection with this item.
PACKAGING CONTENT
- 1 x LD MAILA EasyMount+® flying bracket
- 1 x truss clamp with M10 fixing screw and washer
- 1 x shackle adapter with two M8 fixing screws and washers
- Assembly instructions
DISPOSAL
Packing:
- Packaging can be fed into the recycling system via the usual disposal channels.
- Please separate the packaging according to the disposal laws and recycling regulations in your country
Product:
Dispose of the product in accordance with the disposal regulations in force in
your country.
MANUFACTURER’S DECLARATIONS
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach
E-Mail: Info@adamhall.com / +49 (0)6081 /
9419-0.
Our current warranty conditions and limitation of liability can be found
at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-
DECLARATIONS_LD_SYSTEMS.pdf
In case of service, please contact your sales partner.
UKCA- CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following
guidelines (where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment
Regulation 2012 (SI 2012/3032)
Radio Equipment Regulations 201 7(SI 2016/2015)
UKCA- DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC
Regulation 2016 or RoHS Regulation can be requested at
info@adamhall.com
Products that are subject to the Radio Equipment’s Regulations 2017
(SI2017/1206) can be downloaded from
www.adamhall.com/compliance/
Misprints and errors, as well as technical or other changes are reserved!
SPECIFICATIONS
Model name: | LDMAILATMB |
---|---|
Product name: | MAILA EasyMount+® |
Product type: | Loudspeaker accessories |
Type: | Flying bracket for truss and shackle mounting |
Material, Surface, Color: | Steel, Powder-coated, Black |
Max. load capacity: | 105 kg |
Weight: | 3 kg (inkl. Traversenklemme) |
ASSEMBLY INSTRUCTIONS
FIT THE CROSSBAR CLAMP AND SHACKLE BRACKET
-
Fit the crossbar clamp to the flying bracket:
To secure the screw connection, use a liquid screw adhesive, medium strength! Place the crossbar clamp on the flying bracket and screw it to the flying bracket using the enclosed M10 hexagon socket screw and washer with a tightening torque of 50 Nm.
When replacing the screw: The screw must have a strength class of at least 8.8. -
Fit the shackle holder to the flying bracket:
Use a liquid screw adhesive, medium strength, to secure the screw connections! Place the shackle bracket on the flying bow and screw it to the flying bow using the two enclosed M8 hexagon socket screws and the washers with a tightening torque of 25 Nm each.
When replacing the screws: The screws must have a strength class of at least 8.8.
Note: A shackle is not included in the scope of delivery.
Only use suitable shackles Ø 12 mm!
MOUNTING THE FLYING BRACKET
Before mounting, make sure that the flying bracket and the speaker column or
amplifier module are complete and intact!
To mount the Easy Mount+ flying bracket on the MAILA COL speaker column or the
MAILA SPA amplifier module, insert all three steel hooks of the flying bracket
into the corresponding retaining sockets of the unit housing.
Now slide the entire flying bracket in the direction of the rear of the
housing.
When installing the mounting bracket, ensure that the spring-loaded locking
pins engage fully.
Ensure that locking pins are functioning correctly before every installation.
For safety reasons, both locking pins must be pulled upwards simultaneously to
release the connection (two-hand release).
When mounting the flying bracket on the MAILA COL speaker column, also screw the M20 screw on the top of the column into the corresponding M20 thread on the flying bracket.
HANGING POINT
The optimum suspension point for truss mounting is displayed after entering
the corresponding data in the menu item SPLAY ANGLES under PICK.
There are corresponding markings on the retaining rail of the flying bracket.
Set up the hanging point shown before mounting the flying bracket with
amplifier module or speaker column on a truss.
To move the suspension point, release the spring-loaded locking bolt (Fig.
A) , pull the knob to the side), slide the bracket to the desired point and
snap the locking bolt back into place.
To change the direction of radiation on the horizontal plane, slide the
spring-loaded locking sleeve down about one centimeter and then turn the
flying bracket to the desired position (Fig.B ).
Now let the locking sleeve snap back into place.
CUSTOMER SUPPORT
LD Systems ®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany | Phone:
+49 6081 9419-0 | adamhall.com